PeakDo PK-4K-TX Wireless HDMI Transmitter and Receiver User Manual

PeakDo PK-4K-TX Wireless HDMI Transmitter and Receiver

TX Transmitter

Features

A wireless HDMI transmitter that supports up to 25m, with USB-C and HDMI input ports. No more cumbersome wire connection, no delay in picture transmission, more comfortable and convenient for users. it supports most USB-C mobile devices and notebook. Dual USB-C interfaces support blind plugging, data transfer(USB-C 3.1) and fast charging(PD3.0), also can charge the devices and itselfs. Two USB-A interfaces support data reading, mouse & keyboard connection, and can also be used as a docking station to meet work demands.

Specification

Input: USB-Cx2, HDMIx1
Output: USBx2

1. USB-C: Complies with USB3.1 Gen1, transfer rate up to 5Gb/s. Supports video transmission, complies with PD3.0 protocol (up to 20V/5A)
2. HDMI: resolution up to 4K@30Hz & 1080P@60Hz & 1080P@120Hz 3
3. USB-A: Complies with USB 3.0, transfer rate up to 5Gb/s, and backward compatible with 2.0 and 1.0

• Product Dimension: L57xW57xH156 (mm)

Package Contents

TX (transmitter)|

×1

---|---
USB3.0 cable|

×1

HDMI 1.4 4K@30Hz cable 1m|

×1

60W USB2.0 charging cable 1m|

×1

User manual|

×1

Instructions

1. HDMI input port: Connect the transmitter and source device through the HDMI cable that comes with the product;

2. USB-C input port: Connect the transmitter and source device through the USB-C cable that comes with the product.
   The USB-C cable support PD fast charging which can quickly power up;

3. The USB-A port supports keyboard, mouse, U disk and hard disk connection.

Remarks:

1. Reset button. If the product is restarted or powered off, the HDMI signal output will be given priority after the restart, and USB-C will be the next. The signal will be output from the USB-C port when HDMI is not connected.

2. 4 states of signal indicator:
   • Light off: no power supply, not yet started or in power saving mode.
   • Light flashes slowly: the TX (transmitter) and RX (receiver) are not paired successfully.
   • Light flashes quickly: The TX (transmitter) and RX (receiver) have been successfully paired and connected.
   • Light on: successfully connected and in working mode .

3. If the connection still cannot be established, please reset the device. Method: Press and hold the transmitter and receiver reset buttons for 10 seconds simultaneously, and release after the indicator light goes out. Restart and reconnect the device. Long press to pair for first time use, and short press for the second time.

4. Two angles can be adjusted. 30°(the longest transmission distance), 90°(the strongest signal)
   

Product Details

Connection Method

RX Receiver

Features

A Millimeter wave wireless HDMI receiver that supports up to 25m. It can be used with the transmitter for connection and pairing. With a USB-C charging port, and the HDMI port supports video output. No more cumbersome wire connection, more comfortable and convenient for users.

Specification

Input: USB-Cx1,HDMIx1

1. USB-C: Support 5V1A power supply
2. HDMI: Resolution up to 4K@30Hz & 1080P@60Hz & 1080P@120Hz
   ● Product Dimension: L57xW57xH156 (mm)

Package Contents

RX (receiver)|

×1

---|---
THDMI 1.4 4K@30Hz cable 1m|

×1

60W USB2.0 charging cable 1m|

×1

User manual|

×1

Instructions

Connection method of receiver:

1. The receiver can be powered by the USB-C port or an external power supply. Make sure that the output voltage of the power supply port is: DC_5V, current> 1A, to avoid flickering or disconnection due to insufficient current.
2. Use the HDMI cable to connect the HDMI port to the display device to establish the connection.

Product Details

Connection Method

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>