Alcatel F685 Smart Call Block User Guide
- June 6, 2024
- Alcatel
Table of Contents
Alcatel F685 Smart Call Block User Guide
The Call Blocking’s operation is described on a separate sheet attached
BEFORE 1st USE
Connecting your phone
- Connect plugs in corresponding sockets in the base station. Plug the telephone line into telephone socket and insert power plug in an electrical outlet.
- Insert batteries in Handset
Before you start to use your telephone, charge batteries continuously for 15 hours.
Use only plug adapter and rechargeable batteries supplied with your phone.
Handset / Base Station Keys
- 0K/Menu key
- **key** To block calls, it is necessary to subscribe to the Calling Number Presentation service. Contact your landline operator. In standby mode: Direct access to the Call blocking menu
- 3 & 4. Navigation key
- 3 & 4. Navigation key
- Hang-up/Exit key
- Ml, M2 keys
- Star key
- Long press 0 key
- Recall (flash) to access to operator services*
- Talk key / Loudspeaker
- Back/Mute/Intercom key
- Paging key – To locate handset / to start registration procedure.
Subject to subscription and availability of the service from the fixed line operator.
Display icons
- Indicates that the Call Blocking function is activated. (See the attached Call Blocking addendum) CM
- Indicates battery is fully charged.
- Indicates battery is fully discharged.
- Indicates that an external call is connected or held. Icon blinks when receiving an incoming call.
- Indicates you have a new voice mail message*.
- Indicates you have new missed calls*
- Displays when the alarm clock is activated.
- Displays when handsfree is activated.
- Displays when ringer volume is turned off.
- Indicates that the handset is registered and within range of the base station. Icon disappears when the handset is out of range or is searching for a base.
Set language and flashtime to operate correctly on your network:
- / or select REGL. COMB / / or select LANGUAGE/ / or select your desired language/
- / or select |BS SETTING / / or select FLASH TIME/ / or select SHORT/MEDIUM or LONG / .
Using the Phone
Receive and end a call
- /
Make a call
- 4 either before or after dialing your number
- From redial list: / or /
- From call log list*: /CALL LIST / ****/ or /
- Note: You need to subscribe to Caller Line Identification service to caller’s number or name in the call log.
- From direct memories: long press on KEY 1 or KEY 2 or KEY 3 or M2 keys in idle mode.
- From phonebook: / or /
- During a call, to activate/deactivate handsfree:
To make an internal call
- If only 2 registered handsets: CAINT.
- If more than 2 registered handsets: CAINT / enter the handset number
To make a three-party conference call:
During call
- Press **/ select INTERCOM / **/ enter handset number.
- Press on the called h ndset to answer.
- Long press-won the calling handset to establish conference call.
Phonebook settings: 100 entries
To register in phonebook
/ or / select ADD / /enter name of contact / / select melody / ****•
To register the direct memories in keys M1, M2, 1, 2 & 3
**/ or select HS SETTING **/ or select DIRECT MEM / **/ or select Ml, M2, KEY 1 , KEY 2 & KEY 3 / **/ edit or enter the number / ****
For Duo and Trio models, the phonebook, call log list and redial number saved in the phone are common to all handsets.
General settings
This phone can be customized according to your preferences, to access the different possibilities press:
- To customize handset (name, melody, language,…) or select HS SETTING/ ,
- To change PIN, registration handset, reset:
- or select BS SETTING/
TROUBLESHOOTING
As a general rule, if a problem occurs, remove the batteries from all handsets for about 1 minute, then disconnect and reconnect the power supply to the base and reinstall the handset batteries. For more information, you can download full user guide or get on-line assistance www.alcatel-home.com
SAFETY
This telephone is not designed for Emergency calls when the main power fails. Do not use your telephone to notify a gas leak or other potential explosion hazard. Do not open your device or its power supply to avoid risk of electrical shock. Do not attempt to open the batteries, as they contain hazardous chemical substances. Your telephone must be located in a dry place away from hot, humide and direct sunlight condition. To avoid radio signal interference, place the phone at least 1 meter away from other electrical appliances or other phones.
ENVIRONMENT
This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste.The European Union has implemented a specific collection and recycling system for which producers are responsible. Help us protect the environment in which we live!
CONFORMITY
Hereby, ATL1NKS EUROPE declares that the radio equipment type DECT is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.alcatel- home.com – Average power per channel: 10mW – Maximum Output Power (NTP) : 24dBm – Frequency Range : 1880-1900 MHz