hama 118031 Speaker Wall Mount Instruction Manual
- June 6, 2024
- Hama
Table of Contents
hama 118031 Speaker Wall Mount
Required tools
|
|
---|---|---
Installation kit
(A2) Ø5×25 (x2)
|
(A1) M4x32 (x2)
|
(B2) M6x12 (x2)
|
(B3) M5x12 (2x)
---|---|---|---
(C1) 4×4 (x1)
|
(B1) 1/4″x12 (x2)
|
(C2)(x1)
Assembly & Installation
Package Contents
- Speaker Wall Mount
- Adapter for Samsung WAM35X and WAM55X speakers
- Installation kit
- These operating instructions
Note
Please check that the installation kit is complete before installing the
bracket and ensure that none of the parts are faulty or damaged.
Safety Notes
Warning
- Please note that the supplied wall plugs are for use with concrete brick and solid brick walls only.
- If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified, purchase suitable mounting materials from a specialised dealer.
- If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!
- Ensure that electrical cables are not crushed or damaged during installation.
- Do not mount the product above locations where persons might linger.
- Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
- You should repeat this check at regular intervals (at least every three months).
- When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached. · Make sure that the product is loaded symmetrically.
- Maintain the necessary safety clearance around the attached load (depending on the model).
- In the event of damage to the product, remove the attached load and stop using the product.
Intended use and specifications
- The product is for domestic use
- The product is intended for indoor use only.
- Only use the product for the intended purpose.
- Maximum load bearing capacity: 5 kg
Installation requirements and installation
- Observe the other warnings and safety instructions.
- Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1a ff.).
- During installation, secure the hinges so that the product can be tilted and moved side-to-side.
- This product is equipped with multiple mounting points. Choose those best suited to your terminal device and install the mounting bracket (fig. 2a-2c).
Setting and maintenance
- Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only clean with water or standard household cleaners. · No screws have to be loosened in order to adjust the angle or move it from side to side.
- If necessary, you can adjust the tilt using the screw on the side and the supplied spanner.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Service and Support
Please contact Hama Product Consulting if you have any questions about this product. Hotline: +49 9091 502-0 (German/English) Further support information can be found here: www.hama.com
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
Hama GmbH & Co KG
86652 Monheim / Germany
www.hama.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>