hama 00184071 Mono-Bluetooth Headset MyVoice1500 Instruction Manual

hama 00184071 Mono-Bluetooth Headset MyVoice1500 Instruction Manual

Operating Instructions

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Controls and displays

1. Earhooks
2. Multi-function button
3. + button (..)
4. – button (.)
5. Status LED
6. Silicone ear pads
7. Microphone
8. Micro-USB connection

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

1x “MyVoice1500” Bluetooth® headset
1x micro-USB charging cable
3x ear pads in various sizes (S/M/L)
1x earhooks
1x quick guide
1x warning and safety instructions

Safety instructions

• The product is intended for private, noncommercial use only.
• Use the product only for the intended purpose.
• Children should be supervised to ensure that they do not play with the product.
• Do not use the product in areas in which electronic products are not permitted.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any major shocks.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Protect the product from dirt, moisture and overheating and use it in dry environments only.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Only use the article under moderate climatic conditions.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not operate the product outside the power limits specified in the technical data.
• Do not use the product in a damp environment and avoid splashing water
• While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
• The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
• Do not use the product during the charging process!

Warning – rechargeable battery

• Only use suitable charging devices or USB connections to charge the product.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Do not overcharge the product or allow the battery to completely discharge.
• Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
• Charge regularly (at least quarterly) during periods of prolonged storage.

Warning – magnets

• This product generates magnetic fields. Persons with a cardiac pacemaker should consult a doctor before using this product, as the pacemaker’s proper function could be affected.
• Do not store bank or similar cards with magnetic strips near the charging box or earphones. The data on the cards could be damaged or completely deleted.

Warning – high volume

• High sound pressure!
• There is a risk of hearing damage.
• To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods.
• Always keep the volume at a sensible level. Loud volumes, even over short periods, can cause hearing loss.
• Using this product limits your perception of ambient noise. You should therefore not drive or operate machinery while using them.

Switching on/off

 Press the MFB button (2) for approx. 1-2 seconds until the announcement “Power on” is heard and the LED (5) flashes blue three times.

 To switch off, press the MFB button (2) for approx. 5-6 seconds until the announcement “Power off” is heard, the LED (5) flashes red three times and then goes out.

Note – Automatic switch-off of the product
The product is equipped with an automatic switch-off mechanism. If there is no connection to your device within 3 minutes, it switches itself off automatically.

Charging

Fully charge the headset once before using it for the first time.

1. Switch off the headset and connect it
   
   Ensure that the headset is switched off before charging it.
   Connect the USB charging cable included to the charging socket (8). Connect the free plug on the micro-USB charging cable to a suitable USB charger. To do this, consult the operating instructions for the USB charger you are using.

2. Headset charging process
   
   The LED (5) lights up solid red during the charging process. Once the charging process is complete, the LED (5) lights up blue. It can take up to 3 hours for the battery to be fully charged.

3. Battery capacity
   When the headset battery capacity is low, the LED (5) flashes red and the announcement “Battery Low” is heard.

Bluetooth® pairing

Note – Pairing

• Make sure that your Bluetooth®-capable device is switched on and that Bluetooth® is activated.
• For more information, please refer to the operating instructions of your device.

The headset and the device should not be more than 1 metre apart.
The shorter the distance, the better.
Switch the headset on using the MFB button (2).

1. Check the status of the status LED (5) and the announcements
   If the LED (5) is flashing alternately and the announcement is:
   
   Headset searching for a Bluetooth® connection.
   If the LED (5) is flashing and the announcement is:
   
   The headset is already paired with a Bluetooth® device.

2. Search using your device for the headset (only required on the first connection)
   Open the Bluetooth® settings on your device and wait until the list of found Bluetooth® devices shows MyVoice1500. The announcement “Pairing” is heard.
   Select MyVoice1500 and wait until headset is listed as connected in the Bluetooth® settings of your device. The announcement “Connected” is heard.
   
   Note – Bluetooth® password
   Some devices require a password in order to connect to another Bluetooth® device. If your device requests a password to connect to the product, enter

4. Multi-point technology
   This headset can connect to two Bluetooth®-enabled devices simultaneously (multi-point).
   

   • First connect the first device to the headset.
   • Then deactivate the Bluetooth® function on this device.
   • Then connect the second device to the headset.
   • Activate the Bluetooth® function on the first device again. The headset then connects to this device too.

Controls

Note

• Please be aware that your terminal device must support some functions if they are to be used.
• For more information, please refer to the operating instructions of your device.

Voice assistant function

Siri/ Google

Press and hold the MFB button (2) for around 1 second to initiate communication with Siri or the Google Assistant.

Note – Siri
Siri is only available on suitable devices running iOS 5 (iPhone 4s or later) or higher.

Note – Google Assistant

• The Google Assistant is only available on suitable devices running Android 5.0 or higher with Google Play Services, >1.5 GB of free memory and a minimum screen resolution of 720P.
• The Google Assistant App must be available on your device and be set as the default voice assistant.

Hands-free function

It is possible to use the headset like a hands-free facility for your device.

1. Make a call
   Dial the number directly via your device to make a call.

2. Accept a call
   
   Press the MFB button (2) to accept an incoming call.

3. Reject a call
   
   Press and hold the MFB button (2) twice or use your device to reject an incoming call.

4. End a call
   
   During the call, press the MFB button (2) once to end the call.

5. Last number redial
   
   Press the MFB button (2) twice to redial the last number.

Note
The “Last number redial” function is only available for the device which was paired first with the product in a multi-pairing situation.

Audio playback

1. Start playback on your device.

2. Play / Pause
   
   Press the MFB button (2) once to pause or start audio playback.

3. Next track
   
   Press and hold the + button (3) for around 1 second to skip to the next track.

4. Previous track
   
   Press and hold the – button (4) for around 1 second to skip to the previous track.

Volume control

1. Increase volume
   
   Press the + button (3) once to increase the volume. Once the maximum volume is reached, you will hear “beep”.

2. Reduce volume
   
   Press the –button (4) once to reduce the volume. Once the minimum volume is reached, you will hear “beep”.

Technical data

Bluetooth ® Headset

Bluetooth technology| Bluetooth® v5.0
Profiles supported| A2DP, AVRCP, HFP, SPP
Frequency for Bluetooth ® transmissions| 2402 – 2480 MHz
Range| < 10 m

Rechargeable battery

Battery type| 3.7 V Li polymer
Min. capacity| 200 mAh
Power consumption| max. 5 V       120 mA
Charging Time| ~ 3 h
Standby | ~ 280 h
Music playing | ~ 18 h
**Call time *| ~ 15 h
Weight**| approx. 11g

Once fully charged

Care and maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com

Recycling information

Note on environmental protection:
 After the implementation of the European Directives 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electrical and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well asbatteries to the designated public collection points or to the point of sale at the end of their service lives. Detailed information on this topic is defined in the national laws of the respective country. This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/ batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

 Hama GmbH & Co KG hereby declares that the radio equipment type [00184070, 00184071] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:
www.hama.com->00184070, 00184071 ->Downloads.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>