hama 00095827 Full Motion Monitor Arm Instruction Manual

: June 6, 2024
: Hama

hama 00095827 Full Motion Monitor Arm Instruction Manual

Required tools

Operating instruction

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

2. Package Contents

Monitor Arm
Installation kit (see contents, Fig. 1)
These operating instructions

Note

Please check that the installation kit is complete before installing the

product and ensure that none of the parts are faulty or damaged.

3. Safety Notes

Warning

Given the multitude of terminal devices, the supplied mounting kit is unable to cover every option.
In a few cases, the screws for attaching the terminal device to the product are too long.
Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
Never apply force during mounting. This can damage your terminal device or the product.
If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!
Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
You should repeat this check at regular intervals (at least every three months).
When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
Make sure that the product is loaded symmetrically.
During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
Maintain the necessary safety clearance around the attached load (depending on the model).
In the event of damage to the product, remove the attached load and stop using the product.

4. Intended use and specifications

The product is used for mounting flat panel displays for private household use.
The product is intended for indoor use only.
Only use the product for the intended purpose.

Maximum load bearing capacity:|

10 kg

---|---
Screen size:| 25 – 66cm (10″ – 26″)
Rotation:| 360°
Angles:| -/+90° (depends on the device)
Pivoting range| up to 360° on 3 joints (depends on the device)
Fixation:| according to the VESA standard until: 100×100

5. Installation requirements and installation

Note

Only mount the product with the help of a second person. Get the support and help you need.
Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
The same mounting kit is included with all of our TV wall brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be left over, even if the wall bracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case you might need them later on (e.g. should you move, sell the product).
Observe the other warnings and safety instructions.
Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1a ff.).

Note

Given the multitude of terminal devices available on the market, we cannot describe all possible mounting options here.
Please ensure that the bracket lays flat and evenly on the back of the monitor.
Use the enclosed spacer to even out any unevenness on the back of the monitor.
Ensure that all screws have the proper length and can be mounted until they are hand-tight (see Fig. 3a, 3b).

6. Setting and maintenance

Warning
Always adjust the product with the help of a second person. Get the support and help you need.

Screws do not have to be loosened for lateral movement.
Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
You should repeat this check at regular intervals (at least every three months).
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

7. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.