hama 00118098 Trolley TV Cart Instruction Manual

June 6, 2024
Hama

hama 00095820 Full Motion Monitor Arm-- Monitor A

00 118098
TV Cart Trolley
TV-Wagen
Operating Instructionshama 00118098 Trolley TV Cart -- Trolley TV
Cart

Required tools

hama 00118098 Trolley TV Cart -- Trolley TRequired
tools

Installation kit

hama 00118098 Trolley TV Cart -- TroJlley TV Carthama 00118098 Trolley TV Cart -- TroJlley TV
Cahama 00118098 Trolley TV Cart -- TroJlley
TVhama 00118098 Trolley TV Cart -- Trolley TV
KLCarthama 00118098 Trolley TV Cart --
Trolley TV KLChama 00118098 Trolley TV Cart --
Trolley TV KLhama 00118098 Trolley TV Cart --
Trolley TVhama 00118098 Trolley TV Cart --
Trolley TV CaJKrt

Operating instruction

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package Contents

  • TV bracket (1x)
  • Attachment columns (2x)
  • Compartment shelf (1x)
  • Swivel castors (4x)
  • Installation kit (see contents, Fig. 1)
  • These operating instructions

Note
Please check that the installation kit is complete before installing the product and ensure that none of the parts are faulty or damaged.

Safety Notes

Warning

  • Given the multitude of terminal devices available, the supplied mounting kit is unable to cover every option.
  • If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialized dealer.
  • Never apply force during installation. This can damage your terminal device or the product.
  • If in doubt, have this product mounted by a qualified technician -do not attempt to mount it yourself!
  • Place the product only on flat, non-slip surfaces that can bear the weight of the product and the device attached to it.
  • Maintain the necessary safety clearance around the attached load (depending on the model).
  • Never exceed the maximum load-bearing capacity or maximum screen size specified for the product.
  • Make sure that the product is loaded symmetrically.
  • Check the general operational safety regularly, and make sure that the product and the device attached to it are positioned securely.
  • You should repeat this check at regular intervals (at least every three months).
  • In the event of damage to the product, remove the attached load and stop using the product.
  • Keep the packaging material out of the reach of children due to the risk of suffocation.
  • Dispose of packaging material immediately according to locally applicable regulations.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Do not allow children to use the product for climbing.
  • Do not attach any other objects to the product.

Note
Note that the swivel castors of the product may cause pressure marks on the surface on which the product is positioned. This will depend on the weight load and the stability of the surface where the product is located.

Note –Commercial use

  • If the device is used commercially, the increased duty of care requirements apply.
  • Therefore, please observe the accident prevention regulations of the German employer’s liability insurance association for electrical systems and equipment. Please also observe all accident prevention regulations from other applicable employers liability insurance associations and accident insurance companies, as well as any legal regulations applicable to the particular industry and/or location.
  • The bracket must be installed by trained personnel or by a special technician, especially when installed in schools, educational institutions, hobby/self-service workshops, or other publicly accessible institutions.
  • Secure the product and the attached load against falling using suitable equipment (e.g. an arresting cable) and in accordance with locally applicable regulations.

**Note –Commercial use**

  • We strongly recommend these additional safeguards even if they are not legally required.
  • Have trained personnel carries out regular inspections to ensure that the product is securely installed, properly functioning, and in acceptable condition (we recommend inspections at least every 6months, or more frequently if required for the particular location) and then document these inspections.

Intended use and specifications

  • The product is intended for indoor use only.
  • Use the product for its intended purpose only.
Screen size: 81.0 -178.0 cm (US: 32″ -70″)
Mounting holes: according to the VESA standard until: 600×400
Loading capacity of the wall bracket: 40 kg
Loading capacity of the compartment shelf: 10 kg
Angle: –/+ 10°
Dimensions of the compartment shelf: 48.5 x29.5 cm
Height: 154.7 cm

Installation requirements and installation

Note

  • Install the TV trolley only with the help of a second person. Get the support and help you need.
  • Ensure that no electrical cables are crushed or damaged during installation or adjusting.
  • Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
  • Note that after installation, adjusting the height will require dismantling the mounting bracket.
  • Observe the other warnings and safety instructions.
Installation of the TV trolley
  • Proceed step-for-step in accordance with the illustrated installation instructions (fig. 1tofig. 4).
Installation of the TV
  • Determine the desired height of the TV on the TV trolley and mark the holes to be used.
  • Install the horizontal board(H1) as shown in fig. 3.
  • Attach the carrying arms (H2, H3) to the TV as shown in fig. 5.
  • Now attach the TV to the TV trolley as shown in fig. 6.

Height adjustment

Warning

  • Move the TV trolley only with the help of a second person. Get the support and help you need.
  • Changing the height of the TV requires detaching the TV (along with the carrying arms) from the TV trolley.
  • When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no-load exceeding the maximum permitted dimensions is attached.
  • Pull the mains plug of the TV out of the mains socket.
  • Remove the TV from the TV trolley as shown in fig. 6.
  • Loosen the screws A2 in order to remove the horizontal board.
  • Now repeat the steps listed in section 5.2 Installation of the TV.

Setting and maintenance

  • Ensure that the TV trolley is only moved with the carrying arms secured.
  • Always fix the castors by means of the stop brakes once the TV trolley has been positioned as desired.
  • Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.
  • Securebyinserting the carrying arms into the TV plate and tightening both screws.
  • To adjust the tilt, loosen the knurled screws slightly, set the desired tilt, and retighten the screws securely.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Terms of warranty

HAMA GmbH &CoKGgrants you an extended manufacturer’s warranty for this product that covers the freedom from defects, usability, workmanship, and durability of the materials used for the specified period of 10 years. Compatibility of the product with future standards for further developed hardware is also excluded.
At the discretion of Hama GmbH &CoKG, valid warranty claims in this period will be resolved at no cost either by repair or replacement. The warranty period begins on the date of purchase of this product and is valid throughout the EU.
The warranty you are entitled to is in addition to your statutory rights and does not affect them. The warranty does not cover damage caused by improper use, normal wear and tear, exposure to chemicals, force majeure, or modifications or repairs performed by yourself or third parties.
Furthermore, this warranty does not cover accessories that are not included with the product as standard(promotional parts).
In the event of a warranty claim please write to us, enclosing proof of purchase, at Hama GmbH &CoKG, Dresdner Str. 9, 86653 Monheim, Germany. You arealso free to contact us at www.hama.de or by telephone on +49 (0)9091/502-0.

hama 00118685 Projector Mount-- logo

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
 www.hama.com
+49 9091 502-0

hama 00118685 Projector Mount-- wwwh

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals