HERDEGEN Heel Protector 4PT01 User Manual

 Manual-Gebrauchsanweisung
ME_4PT01
HEEL PROTECTOR

| Ref. 680 011
451015 cm 150gr
---|---
| Ref. 680 008
2215.12 cm 90gr
| Ref. 680 010
2215.12 cm 90gr

Explanation of symbols
Medical Device
Read the instruction manual before use
Observe the safety instructions!
CE conformity

Please read these safety instructions carefully before use, and keep them for future questions.

Safety indications

• ALWAYS consult with your physician or supplier to determine proper
• Don’t store heel support outside and don’t let it under the sun (Beware: don’t let the product in a car in case of high outside temperature !!), store in a dry room in a flat position to prevent deforming the cushion.
•  Store the heel support away from sharp objects and pointed edges to prevent tears and punctures of the cushion and cover.
• Use and store cushion in a flat unfolded position.
• Look for cracks before use.
• Don’t use in extreme temperature conditions (above 38°C or 100°F or below 0°C or 32°F).
• No modification must be made to this device.
• ALWAYS check if the protector is properly and securely locked in place before using.
• In case you didn’t use your cushion for a long time, let it be checked by the technical staff, before using it.
• ALWAYS observe the weight limit on the labeling of your device.
• Use only as a protector and in a proper way: don’t kneel or step on the product.
• If your skin develops redness, discontinue the use of the cushion immediately and consult your doctor or therapist.
• Follow the advice of the professional who prescribed this medical device, respect duration, and frequency of use.
• In case of discomfort consult your professional.
• Avoid contact with any sharp objects or pointed edges that may tear or puncture the cushion or the cover.
• Any serious incident that has occurred in relation to the device shall be reported to the manufacturer and the  competent authority of the Member State in which the user and/or the patient is established.

Intended use

Indications, and contraindications It is easier to prevent pressure ulcers than to treat them. Bedsores can be avoided by changing frequently lying or seating positions to avoid stress on the skin and to minimize the risk of pressure on vulnerable bony areas. Other strategies include skincare, regular skin inspections and good nutrition. Using a  heel protector can help relieve pressure and make sure that the heel is correctly positioned in the chair or in the bed. It is one of the best ways to avoid bedsores, specifically reducing pressure, friction and shear from the heels, „floating“ the heels off the surface of the bed or chair.
Which patients are at risk of pressure ulcers? Patients with limited or no mobility due to their age, an accident or illness, and who sit for long periods of time in the day. Patients who cannot position themselves independently when they get uncomfortable. These patients might slump to one side, forward or slide down the chair, needing help from carers or family members to regain a mid-line posture. Patients who have thin or fragile skin and who are at high-pressure injury risk. Patients who are hoisted for all transfers.

Indications:

– Patients with or at risk of developing minor pressure ulcers
– Pain relief, pressure redistribution, reduction of friction and shear forces
– Patients with significant bony prominences
– Post-surgery and bedsores prevention.
Contraindications:
Don‘t use this product in case of:
“- Excessive sweating causing a risk of skin maceration
– Severe skin defect (ulcers)
–  inadequate supporting surface
– Avoid layering incontinence products

Description and Fitting instructions

Ref 680010
The heel protector is a contoured moulded visco-elastic foam support. The foam increases the contact surface and  maximizes pressure relief. The heel protector‘s shape ensures a good posture of the leg and completely offloads heels. This eel protector is delivered with a polyurethane cover. Hook and loop closure.
Ref 680011 Coated cylindrical hollow-core  fibres provide soft comfortable support, while still keeping the rest of the foot cool. Two soft elastic velcro straps help keep the heel protector in place.
Ref 680008
Our synthetic fur heel protectors are recommended for patients at low risk for skin breakdown and friction burns and offer comfort and warmth against the skin while still allowing air to circulate and feet to breathe. Easy hook and loop closure.

Washing instructions

Ref 680010
To clean Cover:
Remove the cover from the cushion. The cover is machine washable at 30°C. Dry flat and away from any source of heat. Do not use detergent or bleach, do not autoclave.
To clean Cushion: Remove the cover, then wipe lightly with a damp cloth.  Do not use soap and do not submerge in water. After cleaning make sure to wipe dry and air dries the heel protector before using. Re-install the cover over the heel protector.
Ref 680011
Machine washable cold. Dry flat and away from any source of heat. Do not use detergent or bleach, do not autoclave.
Ref 680008
Machine washable at 40°C. Dry flat and away from any source of heat. Do not use detergent or bleach, do not autoclave.
5. Composition
Ref 680010
Polyurethane viscoelastic foam developed by BASF. The cover is made of polyurethane.
Ref 680011
Silicone hollow-core fibres inside. The cover is made of polyurethane.
Ref 680008
100% Polyester

Disposal

Dispose of this product in accordance with your regional waste disposal regulations.
7. Technical specifications
See above information. This product has a 2-year warranty, from the date of purchase, against any manufacturing defect. This product is biocompatible. This product is CE certified. Duration of use: 2 years.

HERDEGEN SAS 5/7, Rue Freyssinet 77500 Chelles-FRANCE 01/08/2017 Rev 3(26/06/21)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>