ezlo 850010800127 Smart Home Hub with ZWave User Guide
- June 6, 2024
- ezlo
Table of Contents
Superior home control, sleek design & cutting-edge techonology.
R eset button & LED Behavior guide
Details
The reset button requires a pin or paperclip to be pressed
Reset button
| RESET BUTTON ACTION | RESULT ACTION | LED STATUS |
|---|
1 short (0.05 – 0,5 seconds) press within 1 .5 second
2 short (0.05 – 0,5 seconds) presses within 1.5 second
3 short (0.05 – 0,5 seconds) presses within 1.5 second
One long (2 – 5 seconds) press
One long (5 – 10 seconds) press
One long (10 – 20 seconds) press
Holding more than 20 seconds| Send the broadcast message to cloud server
Reset client connection Wi-Fi settings
Perform hub Power off action
Reboot controller
Soft reset
Factory reset
Cancel factory reset start| Two blinks
Fast blinking (4 times per second)
Fast blinking (twice per second)
Fast blinking (twice per second)
Slow blinking (once per second)
LED indicator color
Reset logic
HUB ELEMENT| SOFT RESET
LED Fast blinking (twice per second)| HARD RESET
LED Slow blinking (once per second)
---|---|---
Included devices
Z-Wave network ID
WiFi settings
ackups stored at controller
Plugins data
Other user data
Usser addons and plugins
Default addons and plugins
LED light color| Remove from hub, left in included state
Change to random value
Don’t change
Don’t change
Remove
Remove
Don’t change
Don’t change| Remove from hub, left in included state
Change to random value
Restore to defaults
Remove
Remove
Remove
Remove
Restore to defaults
LED light color
Note: Holding more than 20 seconds will cancel the factory reset.
LED STATUS
| Slow blinking (once per second)
Fast blinking (twice per second)
Slow blinking (once per second)
Fast waving (twice per second)| Booting/Power on
Firmware is running and there is nothing else to notify
System has booted but firmware not
Firmware update
The controller has connection to the Internet but it cannot establish
connection with Cloud
Process of adding new smart device is started
Process of removing smart device is started
---|---|---
