Razer Blade Stealth 13″ RZ09-03100 Driver Installation Instruction Manual
- June 6, 2024
- Razer
Table of Contents
Razer Blade Stealth 13″ RZ09-03100 Driver Installation Instruction Manual
APPLICABLE MODEL NUMBERS
- RZ09-03100
DRIVER NAME AND VERSION
- Intel Serial 10 30.100.1916.1
INSTRUCTIONS
Note:This download is for the original driver that was installed on your
Razer Laptop. Updates for this driver are available via standard Windows
Updates. To ensure you have the latest driver installed on your Blade please
make sure to apply all available updates from Windows.
Please follow the instructions below to download and install the original
driver for your Blade. Following the installation, it is recommended to search
for any available Windows Updates.
-
Ensure that your Blade is plugged into a wall outlet and not running on battery alone before proceeding.
-
Save any open documents on your computer and close all other programs before attempting this update.
-
Download the driver from the link below. You will need to right click the .zip folder and choose to extract the files to the location of your choice (such as your desktop).
Driver: http://rzr.to/YyjYo -
Once you have extracted the file proceed to the installation steps below.
INSTALLATION PROCESS
-
Right click on the “SetupSeria110.exe” file and select “Run as administrator” from the menu to initiate the installation process.
-
The User Account Control window may pop up to confirm changes that will be made by the application. Click “Yes” to allow the application to launch.
-
The welcome screen will pop up. Click “Next” to continue.
-
Review the license agreement and tick “I accept the terms in the License Agreement” then click “Next”.
-
Select a folder location where you want the driver to be installed or directly click “Next” to install to the default destination folder.
-
A confirmation window will appear, showing the list of driver components that will be installed. Click “Next” to continue.
Note: Drivers will not be installed for controllers that are not enabled by BIOS. -
Click ” Finish” once the installation process is complete.
