Apple Pro Display XDR Recycling Instructions
- June 6, 2024
- Apple
Table of Contents
Pro Display XDR
Recycler Guide
© 2021 Apple Inc. All rights reserved.
About This Guide
Apple Recycler Guides provide guidance for electronics recyclers on how to
safely disassemble products to maximize recovery of resources. The guides
provide step-by-step disassembly instructions and information on the material
composition to help recyclers direct fractions to the appropriate material
recycler.
To conserve important resources, we work to reduce the materials we use and
aim to one day source only recycled or renewable materials in our products. A
key path to reaching that goal is resource recovery from end-of-life
electronics.
Disassembly procedures are intended to be performed only by trained
electronics recycling professionals.
The recycler is responsible for independently evaluating and ensuring
compliance with all applicable environmental, health, and safety laws related
to the work. These include but are not limited to laws relating to the
management, handling, shipping, and disposal of the outputs of this work as
waste and laws in place to ensure the health and safety of all employees who
support this work.
For questions or feedback about this guide, email
contactesci@apple.com.
Identification
Components Requiring Selective Treatment
The following substances and components should be removed for selective treatment in accordance with Annex VII of Directive 2012/19/EU.
| Substance/Component | Location | Removal Instructions |
|---|---|---|
| Printed circuit board if the surface is greater than 10square centimeters | ||
| Main logic boards, display logic boards, LED array logic boards | Follow steps |
1 –7
Cover glass and LCD cell if the surface is greater than 100 square
centimeters| Cover glass and LCD cell| Follow steps 1–3
External electric cables| Thunderbolt 3 Pro cable, AC power cord| Follow step
1
No further substances or components as listed in Annex VII| |
Safety Considerations
The recycler is responsible for independently evaluating all activities
undertaken by its employees to perform or support the work and ensuring
compliance with all applicable health and safety laws related to the work.
These include but are not limited to laws relating to the health and safety of
all employees who perform or support this work. The recycler is also
responsible for valuating the workspace and ensuring that the area in which
the work is to be undertaken is designed using ergonomic best practices and
meets all ergonomic requirements to ensure the protection of its employees.
Hazard Warning
| Broken glass hazard
---|---
| Chemical inhalation hazard
| Danger of harming your hands
| Sharp element
Personal Protective Equipment
Personal protective equipment should be worn during the entire recycling
process.
| Wear hand protection
---|---
| Wear eye protection
| Wear protective clothing
| Wear a mask
| Wear foot protection
Recommended Tools
Disassembly Instructions
- Remove the display power cable and the Thunderbolt 3 Pro cable from the device.
- Remove the stand. If you have a Pro Stand, follow the first set of instructions. For a VESA mount adapter, follow the second set of instructions.
- Remove the cover glass and LCD cell.
- Remove the two logic boards attached to the display.
- Remove the LED array.
- Remove the dust plates.
- Remove the four main logic boards.
- Remove the magnets.
- Remove the fans and AC power inlet.
- Remove the final ribbon wires and cables.
Treatment of Output Fractions
All outputs from this process must be managed, handled, and disposed of in accordance with applicable waste laws and regulations, including but not limited to the Waste Framework Directive and its national enactments in Europe.
Fraction
|
Downstream Processing
---|---
| 
Documents / Resources
|
Apple Pro Display XDR
Recycling
[pdf] Instructions
Apple, Pro, Display, XDR, Recycling
---|---