EasyTouch 807001 Glucose Monitoring System User Guide
- June 6, 2024
- EasyTouch
Table of Contents
EasyTouch 807001 Glucose Monitoring System
Display Messages
Meter detects blood glucose level higher than 600 mg/dl (33.3 mmol/L).
Meter detects blood glucose level lower than 20 mg/dl (1.1 mmol/L).
Ambient temperature was too high to perform the test.
Ambient temperature was too low to perform the test.
Test strip is not inserted properly/defective test strip.
Meter malfunction. Please call customer service.
Battery power is low. Meter will provide approximately 50 more measurements.
Battery power is low. Replace immediately.
Precautions for Use
MHC Medical Products, LLC is not responsible for any injury resulting from
incorrect use of the EasyTouch• Glucose Monitoring System and not in line with
the instructions set forth in this operating manual.
Only usa EasyTouch Test Strip with the EasyTouch Matar.
Any change or administer of medication based on the EasyTouch blood glucose
test results without the consent and advice of a physician or healthcare
professional is not recommended.
BEFORE TESTING:
Read detailed instructions in your EasyTouct, User’s Manual.
MHC Medical Products, LLC Questions or Comments?
11930 Kemper Springs Dr. Call 877.358.4342
Cincinnati, OH 45240
www.MHCmed.com
To turn the Meter on, first insert k of the the battery, Meter then and press proceed the with reset the button following located instrat the uctions.bac
Test Summary
STEP: 1
Insert a Test Strip, push all the way into test port until meter automatically
turns into on. A beep will sound and moving dotted lines will Now appear you
are followed ready by to a obtain flashing a “•” blood symbol. sample.
STEP: 2
Place blood sample onto the end of enough the test strip. blood The has meter
filled the will strip, beep (O.Sul).when enough blood has filled the strip
STEP: 3
After 5 seconds, your blood glucose result will appear on the display and
will automatically be stored into the meter’s memory.