FlexFit UN56946 Dexley Chair User Guide
- June 6, 2024
- FlexFit
Table of Contents
Dexley Chair
UN56946 | UN59375
ASSEMBLY GUIDE
UNION &SCALE”
Product Support 1-800-270-9557
Easy assembly.
Union & Scale is leading the way in taking some of the stress and frustration
out of furniture assembly.
More logical instructions. No more “huh?” moments – we develop our
instructions to have the right amount of detail you’ll need for easy assembly.
We’re here to help. If you’re confused any step of the way, just call the
number located at the bottom of the instructions pages.
You’ll get help from a friendly representative.
Need help with assembly?
Questions?
Call our Product Support experts
8:00 am-8:00 pm
Eastern Time: 1-800-270-9557
Furniture that works for you.
Your business has its own unique personality.
At Union & Scale, we’ll help bring it to life through furniture and d~cor that
connect perfectly with each other and your team.
Union & Scale™ provides solutions that enable people and organizations to
perform at their best.
We stand behind our products and materials. If for any reason a Union & Scale™
product does not meet the performance expectations, please contact us at
1-800-270-9557.
Sit down on the job in custom comfort.
No two people are alike. But no matter what you’ve built like, there’s one chair that’s built for everyone’s comfort The “Union & Scale Chair”. Take a look at the diagram below. It’s packed with features that make it easy to fine-tune the comfort to meet your unique needs.
Product Features
| Seat Height Adjustment
Seat height adjusts to assure correct posture and relieves stress on the back,
thighs, and legs.
---|---
|
Upright Seat Tilt Lock
Simple locking mechanism fixes seat in upright position to assure healthy
posture.
|
Lumbar Support Adjustment
Added cushioning in the chair back provides maximum support to the lower back.
air
|
Tilt Tension
Easy adjustment of chair flexibility avoids heavy pushing and relaxing muscles
|
Arm Height Adjustment
Arms adjust up and down or swivel to ease pressure on the neck and support
shoulders.
Features Instructions
|
Seat Height Adjustment
• To raise the seat: lean slightly forward while seats to relieve the pressure
on the tilt mechanism.
• Reach under the right side of the chair and locate the handle.
Raise yourself up slightly to allow the chair to reach your desired height.
• To lower the seat: remain seated and lift the handle upwards until the chair
lowers to your desired height.
---|---
|
Upright Seat Tilt Lock
• Locate the handle underneath the right side of the seat.
• Pulling the handle all the way out allows the chair to tilt.
• Pushing the handle in when the chair is in the fully upright position
locks the chair in place.
|
Tilt Tension
• Grasp the round cylinder knob under the front center of the seat.
• For firmer/stiffer – turn counterclockwise.
• For softer/looser – turn clockwise.
|
Arm Height Adjustment
• Press the buttons on the chair arms to allow the arms to move up or down
freely.
• Release the buttons once the desired height is reached.
|
Lumbar Support Adjustment
• Slide the lumbar support up or down to the desired location.
Included Parts
Tools Provided
**E** Allen Wrench ( 1)
Chair bolts, screws, and knobs may loosen during use. Please tighten your chair’s hardware each month.
Each piece of hardware needed for each step is located in the corresponding
segment in your Easy Parts Pack.
| 
| |
---|---|---|---
| 
| |
| 
| |
Behold, the finished product.
Warranty
Worklife Brands warrants to the original purchaser of this Union & Scale Chair
against defects in design, assembly, material, or workmanship for 7 years from
the original date of purchase. In the event of a defect in the design,
assembly, materials or workmanship of this product within 7 years from the
original date of purchase, Worklife Brands will replace any such defective
part. Parts included under this warranty are non-moving metal components,
chair frame, pneumatic cylinder, upholstery, and all other parts. To claim
your replacement parts, contact product support at
1-800-270-9557. An original receipt or
proof of purchase is required to obtain replacement parts. This warranty is
based on up to 3-5 hours of continual use within a 24-hour period for users
weighing up to 275 lbs. (124 kgs).
Claims under this limited warranty or any implied warranty shall be limited to
replacement of 100% of the chair or refund of the purchase price at Worklife
Brands’ sole option.
This warranty does not apply to normal wear or damage from misuse, abuse,
improper storage or handling, installation, accident, repair or alteration, or
other circumstances not directly attributable to manufacturing or material
defects.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN,
EXPRESS OR IMPLIED. STAPLES SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL STAPLES BE LIABLE FOR ANY
INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES
(SUCH AS BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS,
DATA, OR RECORDS) RELATED TO THIS PRODUCT.
This warranty gives you specific legal rights, and you may also have other
rights that vary depending upon the state, province, territory, or country.
Some states, provinces, and territories do not allow the exclusion or
limitation of incidental or consequential damages or limitation on how long an
implied warranty lasts.
Except as stated herein, no other warranties shall apply.
Product Support 1-800-270-9557
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>