TRiSTAR AP-4787 Air Purifier Instruction Manual
- June 6, 2024
- Tristar
Table of Contents
AP4787
Instruction manual
PARTS DESCRIPTION
1. Control panel | 4. Body |
---|---|
2. Lamp | 5. Filter |
3. Outlet cover | 6. Base cover |
WWW.TRISTAR.EU
Tristar Europe B.V. | Jules Verneweg 87
5015 BH Tilburg | The Netherlands
SAFETY
- By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
- The appliance must be placed on a stable, level surface.
- Never place the appliance on a soft surface such as a bed or sofa as this could cause the unit to tip over and block the air inlet or outlet grills.
- The user must not leave the device unattended while it is connected to the supply.
- This appliance is only to be used for household purposes and only for the purpose it is made for.
- This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
- To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
- If the Filter is covered by a bag always remove the plastic bag before use.
- Always unplug the device before moving or cleaning the unit, opening the grill, changing the filter and whenever the unit is not in use. To disconnect the unit, be sure to pull the plug and not the cord.
- Do not use outdoors.
- Never drop or insert any objects into the openings of the unit.
- Keep the unit away from heated surfaces and open flames.
- Do not attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by an authorized service center.
- Do not place anything on top of unit.
- Never use detergents, gasoline, glass purifier, furniture polish, paint thinner, or other household solvents to clean any part of the appliance.
- Always turn the appliance off before unplugging it.
- This appliance should only be used by normal room temperature.
BEFORE THE FIRST USE
-
Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
-
The appliance comes with all filters fitted inside, but you have to remove the packaging of the filters before you can use the appliance. Remove all filters, unpack them and place them back into the appliance as described below.
-
Note: Make sure you insert the filters in the correct position.
-
Put the appliance upside down on a soft cloth to avoid scratching, to open the base cover, you need to find an arrow point on the base cover corresponding the lock position, turn the base cover counterclockwise from lock to open position, then the lock will be released.
-
Remove the base cover and take out the filter.
-
Remove the packaging material from the filter.
-
Put the filter back into the appliance.
-
Turn the base cover clockwise from open position to lock position, you will hear a “click” sound, the base cover is fastened.
USE
- Put the plug in the wall socket, all lights go on at once and you will hear a beep sound and the lights go out again.
- Press the power button to switch on the appliance.
- The power button indicator light, air quality indicator light and fan speed 2 indicator light (Medium) on the control panel go on.
- Fan speed adjustment
- The fan speed indicator light indicates at which fan speed the appliance is operating.
- Press the speed button to adjust the fan speed level, there are three levels. (Low, Medium and High level)
- Auto mode
- At auto mode, the fan speed will be automatically adjusted according to AQ level as below:
AQ Color| Blue| Green| Orange| Red
---|---|---|---|---
Speed mode| Sleep| 1(Low)| 2(Medium)| 3(High)
AQ level| Very good| Good| Moderate| Bad
- At auto mode, the fan speed will be automatically adjusted according to AQ level as below:
- Sleep mode
- Push sleep mode button to use the appliance in sleep mode, it works very quietly, only the timer and filter button indicators light on, all others are off, press any other buttons (except the timer and filter buttons) to exist the sleep mode.
- AQ Light, in working and in standby status:
- Working status (Air quality light) The air quality light color will automatically change according to the detecting result of sensor.
- Standby status (Night light mode) At standby status, press the air quality button, the amber night lights (orange) will turn on. Press air quality button again, the light become half brightness, to turn off the night light, just press the same button for the third time, the light cycles as brightness, half brightness, off.
- Setting timer
- Press the timer button to turn on or off the timer and to cycle through the timer options (2 hours, 4 hours, or 8 hours).
- The air purifier will automatically power off once the timer is finished.
- NOTE: Pressing the timer button or unplugging the air purifier will cancel the timer.
- Filter replacement light
- When indicator lights, it means that you should check the filter if it need to be cleaned or replaced.
- Note: The filter’s lifetime is based to your house air quality and using time. Using the appliance in a humid environment will reduce the lifetime of the filter.
- Memory Function
- The air purifier has the setting memory while the users turn it off, including fan speed. It will return to the last setting while the users turn it on again.
CLEANING MAINTENANCE
- Regularly clean the inside and outside of the body to prevent dust from collecting on the inside and outside.
- Wipe away dust with a soft dry cloth from the body of the appliance.
- Clean the air inlet and the air outlet with a soft dry cloth.
- Always unplug the appliance before you clean it.
- Never immerse the appliance in water or any other liquid.
- Never use aggressive or flammable cleaning agents such as bleach or alcohol to clean any part of the appliance.
- The filter is not washable.
FILTER REPLACEMENT
- It is recommended to change the air filter every 68 months. However, it may need to change sooner or later depending on how often the air purifier will be used. It is important to watch out for the following signs of an expired filter:
- Increased operating noise
- Decreased airflow
- Clogged filter
- Increased presence of odors
NOTE:
- The environment in which the air purifier being used may also extend or shorten the lifetime of the air filter. Using your air purifier in an environment of relatively high pollution may mean you will need to change the air filter more often.
- If the air pollution in your environment is very high, there is a possibility that the filters may not be completely effective and may need to be replaced before lights up.
- Remember to reset the air purifier after changing the air filter.
- Switch off the appliance and unplug it.
- Put the appliance upside down on a soft cloth to avoid scratching, to open the base cover, you need to find an arrow point on the base cover corresponding the lock position, turn the base cover counterclockwise from lock to open position, then the lock released.
- Remove the old filter.
- Remove the packaging material of the new filter.
- Put the new filter back into the appliance.
- Turn the base cover clockwise from the open position to lock position, you will hear a “click” sound, the base cover is fastened.
- Put the plug in the wall socket and switch on the appliance again.
- Reset Filter’s lifetime: The filter lifetime should be reset if the filter indicator lights up, after replacing the new filter, you need to reset filter lifetime.
• Plug in the air purifier and turn it on.
• Press and hold the filter button for 3 seconds.
• Release the filter button and the light will turn off, indicating that the reset is complete.
• Filter replacement force mode
- When using the air purifier in an environment of heavy pollution, the lifespan of the air filter may be significantly reduced. You can change the filters even if the filter indicator light does not light up. Follow the steps below to perform a hard reset.
- Replace the air filters as mentioned in the Filter Replacement section.
- Plug in the air purifier and keep it in standby mode.
- Press and hold the filter button for 3 seconds, and it will light up.
- Press and hold the filter button again for 3 seconds, and it will turn off. The reset is now complete.
TROUBLESHOOTING
Problem | Cause | Solution |
---|---|---|
Air purifier does not power on or does not respond to button controls. | Power | |
button has not been pressed after plugging in the air purifier. | Press power |
button once to turn on the air purifier,
Power cord is damaged| Immediately discontinue use andcontact the customer
service.
Air purifier is defective or malfunctioning.
Air purifier makes an unusual noise while operating.| Air filters are dirty.|
Replace the air filters as instructed in the filter replacement section.
Filter does not fit properly.| Properly place filter.
Foreign object inside the unit.| Immediately
discontinue use and contact customer service. Do not attempt to open the air
purifier.
Significantly reduced airflow| Filter packaging has not been removed,| Remove
packaging from filter before use.
Fan speed is low.| Pres fan speed button to adjust fan speed.
Air filters needs to be replaced.| Replace the air filters as instructed in
the filter replacement section.
Not enough clearance on all sides of the purifier.| Ensure there is at least
38cm of clearance on all sides of the purifier.
Poor air purification quality| Air filters needs to be replaced.| Replace the
air filters as instructed in the filter replacement section.
Room is too large for the air purifier’s
applicable area.| Ensure the room is smaller than 26 kV.
Air inlet or outlet in blocked.| Remove objects blocking air inlet or outlet.
Filters not properly placed in housing.| Properly place the filters.
Filter reset button is still illuminated after replacing the air filters.| The
air purifier has been reset incorrectly.| See the filter replacement section
on how to properly reset the unit.
Air purifier turns on. then suddenly turns off.| Air purifier is defective or
malfunctioning.| Immediately discontinue use and contact the customer service.
Do not attempt to open the air purifier for self-servicing.
Air purifier beeps repeatedly after being powered on or in.
ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.
Support
You can find all available information and spare parts at
www.tristar.eu!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>