AVANTCO CFD10 Commercial Food Dehydrator User Manual

June 6, 2024
AVANTCO

User Manual
Commercial Food Dehydrator
Model: CFD10
07/2020

Please read and keep these instructions. Indoor use only.

IMPORTANT SAFETY INFORMATION

  1. Read all instructions carefully and completely.
  2. For commercial use only.
  3. Do not touch hot surfaces.
  4. Protect against electrical shock by keeping all cords, plugs, and other electrical components away from water or other liquids.
  5. Unplug this unit when not in use and before cleaning.
  6. Allow the unit to cool before putting on or taking off parts.
  7. Do not operate this or any appliance with a damaged electrical cord or plug.
  8. Do not operate this or any appliance after it has malfunctioned or been damaged in any way.
  9. Do not use outdoors.
  10. Do not place on or near a hot gas or electric burner.
  11. Attach the plug to the appliance first, then plug the electrical cord into the wall outlet.
  12. Disconnect the unit by turning the power switch to “OFF”, then removing the electrical plug from the wall outlet.
  13. Do not use appliances for any application other than intended use.
  14. Do not insert metal utensils or oversized foods into this unit as they may cause a fire and heighten the risk of electrical shock.
  15. Do not store any item on top of this unit when in operation.
  16. Do not allow this dehydrator to touch or be covered by flammable material, such as curtains, draperies, walls, etc., when in operation.
  17. Do not clean with metal scouring pads as pieces can break off and touch electrical components, heightening the risk of electrical shock
  18. Never place materials such as paper, cardboard, plastic, etc. in this dehydrator.
  19. Do not cover the interior of this unit with metal foil as it may cause the dehydrator to overheat.
  20. Avoid scratching the surface or nicking the edges of this unit. Do not put sharp articles beyond the net interior; it may choke the fan and cause product failure.
  21. Note that the use of accessories not recommended by the manufacturer may result in injury.
  22. Children should be supervised to ensure that they do not play with the dehydrator.
  23. Place unit on a flat surface that is well ventilated.
    NOTE: Save these instructions for future reference

Identification of Key Parts

Before Using Your Dehydrator

Before drying anything in your dehydrator for the first time, please follow these simple instructions:

  1. Remove from the box.
  2. Remove rack supports, door, and stainless steel racks (tape will be holding them in).
  3. Using a small amount of detergent, was the handle and food racks with soapy water. (NOTE: Do not use a spray or abrasive polishing agent.)
  4. Wipe down the interior with a damp cloth. While washing this unit, do not touch the electrical heating element and fan. Do not soak the inside of the dehydrator with water.
  5. After washing and drying, re-assemble the unit.
  6. Plugin and turn it to its highest temperature setting for 5 minutes.
  7. Turn off the heating elements and open the dehydrator front panel in order to remove any smoky residue from inside the dehydrator. The heating elements are well lubricated and this initial use will help burn off the extra grease. A light amount of smoke is normal during this process.

Using Your Dehydrator

To start your dehydrator, turn the power switch on. To set a time, turn on the timer, and this will cause the fan to start working. Turn on the thermostat dial to set the desired temperature, and the heating element will begin heating.
CAUTION: During the dehydrating process, make sure that no metal accessory comes in contact with the electrical fan and heating elements.
CAUTION: Foods dehydrated in this unit will be hot. Wear protective hand coverings when reaching into the dehydrator to retrieve food.

Typical Operation Sequence

ACTION RESULT
Plugin your dehydrator Power is connected and the power light will go on

after turning the power switch “ON”
Flip power switch to “ON”| The power light will turn on and the unit will be ready to operate
Turn diam to “ON”| The convection fan will begin circulating air
Turn the thermostat dial to “ON”| Heating element will begin heating the unit
Timer reaches zero| Timer indicates that products have finished drying
Unload dehydrator| Product will be dehydrated/hot; use caution removing it from the dehydrator

Timer

The timer has a range of 0 to 12 hours. If you need to reset the dehydrating time while the dehydrator is in operation, simply turn the timer to a new position. The dehydrator will reset the time according to the revised requirement without needing to be turned off.
When the set dehydrating time has been reached, the unit will alert you and the heating elements/fan will shut off.

Temperature Control Knob

The temperature range of this unit is 85-160 degrees Fahrenheit on 120V models. This thermostatic switch controls the temperature inside the dehydrator and helps to maintain the proper temperature during various dehydrating applications.

Dehydrating Tips

  • Use different temperatures for different foods, and use the best quality foods.
  • Fruits and vegetables in peak season have more nutrients and flavor. Do not use foods with bruises or blemishes.
  • Meats should be lean and fresh. Remove as much fat as possible before dehydrating.
  • Do not overlap foods. Lay foods out flat on the trays.
  • Check the dryness after a few hours, and then check every two hours until dehydration is complete. Cut down the center of a few samples to check internal dryness. If there is moisture, dehydrate longer.

Cleaning & Maintaining Your Dehydrator

  1. Turn the unit off and wait for it to cool.
  2. Unplug the cord from the wall.
  3. Clean and sanitize rack supports, rack, and door.
  4. Wipe and clean the interior of the unit using warm water and a damp cloth or sponge.
  5. Reassemble when dry and store.

Specifications

MODEL #| POWER SUPPLY| DIMENSIONS| UNIT WEIGHT| SIZE| PLUG
---|---|---|---|---|---
CFD10| 120V 60HZ 1000W| 16”W x 17”D x 20”H| 28 lbs.
(31 lbs. Shipping)| 10 Racks| NEMA 5-15P

Parts List

No . Part Name Specification
1 Power Cord 177PCFDP1
2 Block Terminal
3 Rear Board
4 Fan Assembly 177PCFDP4
5 Thermostat 177PCFDP5
6 Insulation Plate
7 Right Rack Assembly 177PCFDP7
8 Timer 177PCFDP8
9 Temperature Limiter 177PCFDP9
10 Thermostat Holding Plate
11 Heating Element Assembly 177PCFDP11
12 Shell
13 Foot
14 Tray 177PCFDP14
15 Quarries Net
16 Front Panel 177PCFDP16
17 Handle 177PCFDP17
18 Left Rack Assembly 177PCFDP18
19 Top Board
20 Control Board Plate
21 Switch 177PCFDP21
22 Timer Knob 177PCFDP22
23 Thermostat Knob 177PCFDP23

Circuit Diagram

Troubleshooting

Problem: The dehydrator does not work after being switched on .

  • Make sure the dehydrator is plugged in.
  • Be sure that the timer is set.
  • Be sure that the temperature control knob is set.

Problem: The dehydrator does not work after being switched on .

  • Do not attempt to dismantle the dehydrator.
  • Contact your service agent right away to examine the fan.

Problem: Food is often over dried or not dried, even when operating according to the recipe .

  • Check that the fan motor is operating normally.
  • Contact your service agent to examine the temperature control knob.

Equipment Limited Warranty

Avantco warrants its equipment to be free from defects in material and workmanship for a period of 1 year. This is the sole and exclusive warranty made by Avantco covering your Avantco brand equipment. A claim under this warranty must be made within 1 year from the date of purchase of the equipment. Only the equipment’s original purchaser may make a claim under this warranty. Avantco reserves the right to approve or deny the repair or replacement of any part or repair request. The warranty is not transferable. Avantco Equipment installed in/on a food truck or trailer will be limited to a period of 30 days from the original date of purchase.

To Make a Warranty Claim:
For Warranty Inquiries contact the location where you purchased the product:

Failure to contact the designated location prior to obtaining equipment service may void your warranty.

Avantco makes no other warranties, express or implied, statutory or otherwise, and HEREBY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE.

This Limited Warranty does not cover:

  • Equipment sold or used outside the Continental United States
  • Use of unfiltered water (if applicable)
  • Avantco has the sole discretion on wearable parts not covered under warranty
  • Equipment not purchased directly from an authorized dealer
  • Equipment used for residential or other non-commercial purposes
  • Equipment that has been altered, modified, or repaired by anyone other than an authorized service agency
  • Equipment where the serial number plate has been removed or altered.
  • Damage or failure due to improper installation, improper utility connection or supply, and issues resulting from improper ventilation or airflow.
  • Defects and damage due to improper maintenance, wear, and tear, misuse, abuse, vandalism, or Acts of God.

Any action for breach of this warranty must be commenced within 1 year of the date on which the breach occurred.
No modification of this warranty, or waiver of its terms, shall be effective unless approved in a writing signed by the parties. The laws of the Commonwealth of Pennsylvania shall govern this warranty and the parties’ rights and duties under it. Avantco shall not under any circumstances be liable for incidental or consequential damages of any kind, including but not limited to loss of profits.

www.AvantcoEquipment.com
04/2019

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

AVANTCO User Manuals

Related Manuals