Hisense 2.0 Channel Soundbar Home Theater System HS205 User Manual

: June 6, 2024
: Hisense

Table of Contents

Important Safety Instructions
Package Contents
Product Diagram
Remote Control
Preparations
Placement and Mounting
Connections
- Connect Power
Basic Operation
LINE IN / OPTICAL / COAXIAL / HDMI ARC Operation
Bluetooth Operation
USB Operation
Troubleshooting
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hisense 2.0 Channel Soundbar Home Theater System HS205 User Manual

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

****The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to aler t the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Safet

Read these instructions – All the safety and operating instructions should be read before this product is operated.
Keep these instructions – The safety and operating instructions should be retained for future reference.
Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions – All operating and usage instructions should be followed.
Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool and the like.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
Minimum distance around the apparatus for sufficient ventilation is 5cm.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Batteries should be recycled or disposed of as per state and local guidelines.
The use of apparatus in moderate or tropical climates.

Caution:

Use of controls or adjustments or performance of procedures other than those described herein, may result in hazardous radiation exposure or other unsafe operation.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on apparatus.
The mains plug/appliance coupler is used as the disconnect device, the disconnect device must remain readily operable.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Warning

The battery (batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like
Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
Do not place this unit close to strong magnetic fields.
Do not place this unit on the amplifier or receiver.
Do not place this unit close to damp areas as the moisture will affect the life of the laser head.
If any solid object or liquid falls into the system, unplug the system and have it checked by qualified personnel before operating it any further.
Do not attempt to clean the unit with chemical solvents as this may damage the finish. Use a clean, dry or slightly damp cloth.
When removing the power plug from the wall outlet, always pull directly on the plug, never yank on the cord.
Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment.
The rating label is pasted on the bottom or back of the equipment.

Battery usage CAUTION
To prevent battery leakage which may result in bodily injury, property damage, or damage to the apparatus:

Install all batteries correctly, + and – as marked on the apparatus.
Do not mix old and new batteries.
Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
Remove batteries when the unit is not used for a long time.

Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

We hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Bluetooth logo
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Package Contents

Main Unit
Remote Control / AAA Batteries x 2
AC Power Cord
Optical Cable
Wall Mounting Screws (x2) / Brackets (x2) / Bracket Screw (x2) / Wall Anchors (x2)
User Manual/Quick Start Guide/ Wall Mount Guide

Power cord quantity and plug type vary by regions.
Design and specifications are subject to change without notice.

Product Diagram

Main Unit

Product Diagram

Remote Control Sensor
Receive signal from the remote control.
LED Indicators
- Red : In STANDBY mode.
- Orange / Orange flash : In Optical / Coaxial mode.
- Blue : In Bluetooth mode.
- White : In HDMI ARC mode.
- Green / Green flash : In LINE IN / USB mode.
Screws
Remove the screws then install the wall mounting screws into the back of the unit.
(ON/OFF) Button
Switch the unit between ON and Standby mode.
+/- (Vol+/Vol-) Buttons
Increase/decrease the volume level.
(SOURCE) Button
Select the play function.
AC~ Socket
Connect to the power supply.
LINE IN Socket
Connect to an external audio device.
USB Socket
Insert the USB device to play music.
HDMI ARC Socket
Connect to a TV via HDMI cable.
COAXIAL Socket
Connect to a coaxial audio output on the TV.
OPTICAL Socket
Connect to an optical audio output on the TV.

Remote Control

Switch the unit between ON and
STANDBY mode.
(MUTE) Mute or resume the sound.
MOVIE Switch to MOVIE EQ effect.
MUSIC Switch to MUSIC EQ effect.
VOL+/VOL- Increase/decrease the volume level.
/ Skip to previous/next track in BT/USB mode.
/PAIR Play/pause/resume playback in BT/USB mode.
Press and hold to activate the pairing
function in Bluetooth mode or disconnect the
existing paired Bluetooth device.
NEWS Switch to NEWS EQ effect.
HDMI ARC Select the HDMI ARC mode.
OPT/COAX Select the OPTICAL/COAXIAL mode.
(BT) Select the Bluetooth mode.
LINE IN Select the LINE IN mode.
USB Select the USB mode.

Preparations

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from a distance.

Even if the Remote Control is operated within the effective range 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control.
If the Remote Control is operated near other products which generate infrared rays, or if other remote control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly.

Replace the Remote Control Battery

Press and slide the back cover to open the battery compartment of the remote control.
Insert two AAA size batteries (included). Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment.
Close the battery compartment cover.

Precautions Concerning Batteries

Be sure to insert the batteries with correct positive “(+)” and negative “(-)” polarities.
Use batteries of the same type. Never use different types of batteries together
Either rechargeable or non-rechargeable batteries can be used. Refer to the precautions on their labels.
Be aware of your fingernails when removing the battery cover and the battery.
Do not drop the remote control.
Do not allow anything to impact the remote control.
Do not spill water or any liquid on the remote control.
Do not place the remote control on a wet object.
Do not place the remote control under direct sunlight or near sources of excessive heat.
Remove the battery from the remote control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire.
Do not use any batteries other than those specified.
Do not mix new batteries with old ones.
Never recharge a battery unless it is confirmed to be a rechargeable type.

Placement and Mounting

Placement

Placement and Mounting
A. If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand, centered with the TV screen.
B. If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.

Wall Mounting (if using option-B)

Note:

Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to verify that the wall will safely support the total load of the unit and wall brackets.
Additional tools (not included) are required for the installation.
Do not overtighten screws.
Keep this instruction manual for future reference.
Use an electronic stud finder to check the wall type before drilling and mounting.

Drill 2 parallel holes (Ø 5.5-6 mm each according to wall type) in the wall. The distance between the holes should be 921mm.
Insert the supplied wall anchors into 2 screw holes on the wall. Insert the supplied wall bracket screws through the wall brackets into the wall anchors. Fix and tighten the screws on the wall.
Remove the screws then install the wall mounting screws into the back of the unit.
Hang the unit on the wall mount brackets.

Connections

Connect to HDMI (ARC) Socket

Your Soundbar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable.

Using a High Speed HDMI cable (not included), connect the HDMI ARC -To TV connector on your Soundbar to the HDMI ARC connector on the TV.
- The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual.
On your TV, turn on HDMI-CEC operations. For details, see the TV user manual.

Tips:

Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On.
The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, please refer to your TV owner’s manual.
Only HDMI 1.4 compatible cables can support the ARC function.

Connect to OPTICAL Socket

Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (included) to the TV’s OPTICAL OUT socket and the OPTICAL socket on the unit.

Connect to COAXIAL Socket

You also can use the COAXIAL cable (not included) to connect the TV’s COAXIAL OUT socket and COAXIAL socket on the unit.

Tip:
While in OPTICAL or HDMI ARC or COAXIAL mode, if there’s no sound output from the unit, you may need to activate PCM Signal output on your source device (eg. TV, DVD or Blu-ray player).

Connect to LINE IN Socket

A. Use a RCA to 3.5mm audio cable (not included) to connect the TV’s audio output sockets to the LINE IN socket on the unit.
B. Use a 3.5mm to 3.5mm audio cable (not included) to connect the TV’s or external audio device headphone socket to the LINE IN socket on the unit.

Connect Power

Risk of product damage!

Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
Before connecting the AC power cord, ensure you have completed all other connections.
Connect the mains cable to the AC~ Socket of main unit and then into a mains socket.

Basic Operation

Standby/ON
When you first connect the main unit to the mains socket, the main unit will be in Standby mode.

Press the button on the unit or on the remote control to switch the unit ON.
Press the button again to switch the unit back to STANDBY mode.
Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.

Auto Wake
If a TV or an external device is connected (LINE IN / OPTICAL / COAXIAL / HDMI ARC), the unit will switch on automatically when the TV or the external device is switched on.

Automatic Power Off Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the external unit is disconnected, switched off.

To switch the unit off completely, remove the mains plug from the mains socket.
Please turn the unit off completely to save energy when not in use.

Select Modes
Press the (SOURCE) button repeatedly on the unit or the HDMI ARC, (Bluetooth), OPTICAL, COAXIAL, USB and LINE IN buttons on the remote control to select the desired mode. The indicator light on the front of the main unit will show which mode is currently in use.

Adjust the Volume

Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.

If you wish to turn the sound off, press the button on the remote control. Press the button again or press the VOL+ / VOL- buttons to resume normal listening.

Note: While adjusting the volume, the status LED indicator will flash quickly. When the volume has hit maximum/minimum value level, the status LED indicator will flashes once.

Select a Preset Sound Effect

While playing, press the MOVIE / MUSIC / NEWS buttons on the remote control to select the preset equalizers:

MOVIE (recommended for viewing movie)
MUSIC (recommended for listening to music)
NEWS (recommended for listening to news)

LINE IN / OPTICAL / COAXIAL / HDMI ARC Operation

Ensure that the unit is connected to the TV or audio device.
Press the button repeatedly on the unit or the LINE IN, OPTICAL, COAXIAL, HDMI ARC button on the remote control to select the desired mode.
Operate your audio device directly for playback features.
Press the VOL +/– button to adjust the volume to your desired level.

Tip:
While in OPTICAL or HDMI ARC or COAXIAL mode, if there’s no sound output from the unit, you may need to activate PCM Signal output on your source device (eg. TV, DVD or Blu-ray player).

Bluetooth Operation

Pair Bluetooth-enabled Devices The first time you connect your bluetooth device to this player, you need to pair your device to this player.

Note:

The operational range between this player and a Bluetooth device is approximately 26 feet (8m) (without any object between the Bluetooth device and the unit).
Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
Compatibility with all Bluetooth devices is not guaranteed.
Any obstacle between this unit and a Bluetooth device can reduce the operational range.
If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode automatically.

During ON mode, press the button repeatedly on the unit or the button on the remote contro to select Bluetooth mode. The Blue indicator will light flash.
Activate your Bluetooth device and select the search mode. “Hisense HS205” will appear on your Bluetooth device list.
- If you cannot find the unit, press and hold the /PAIR button on the remote control to be searchable. The system has entered pairing mode. You will hear audio prompt from the unit and the Bluetooth indicator will flash quickly.
Select “Hisense HS205” in the pairing list. After audio prompt, the system is successfully connected and the Bluetooth indicator will light up solidly.
Play music from the connected Bluetooth device.

To disconnect the Bluetooth function, you can :

Switch to another function on the unit.
Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from the soundbar after audio prompt.
Press and hold the / PAIR button on the remote control.

Tips:

Enter “0000” for the password if necessary.
If no other Bluetooth device pairs with this player within two minutes, the player will recover its previous connection.
The player will also be disconnected when your device is moved beyond the operational range.
If you want to reconnect your device to this player, place it within the operational range.
If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player.
If the connection is lost, follow the instructions above to pair your device to the player again.

Listen to Music from Bluetooth Device

If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the player.
If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player’s remote control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
To pause/resume play, press the / PAIR button on the remote control.
To skip to a track, press the buttons on the remote control.

USB Operation

Insert the USB device.
Press the button repeatedly on the unit or press the USB button on the remote control to select USB mode.
During playback:
- To pause or resume play, press the /PAIR button on the remote control.
- To skip to the previous/next file, press the buttons on the remote control.

Tips:

The unit can support USB devices with up to 32 GB of memory.
This unit can play MP3.
The unit support FAT32.

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service.

No power

Ensure that the AC cord of the apparatus is properly connected .
Ensure that there is power at the AC outlet.
Press standby button to turn the unit on.

Remote control does not work

Before you press any playback control button, first select the correct source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit.

No sound

Increase the volume. Press Volume Up on the remote control or on the soundbar.
Press MUTE on the remote control to ensure the soundbar is not muted.
Press source buttons to select a different input source.
When using either of the Digital inputs, if there is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your T V’s user manual for more detailed information.
If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.

I can’t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing

Ensure the Bluetooth function is activated on your Bluetooth device.
Ensure you have paired the unit with your Bluetooth device.

This is a 15 mins power off function, one of the ERPII standard requirement for saving power

When the unit’s external input signal level is too low, the unit will be turned off automatically in 15 minutes. Please increase the volume level of your external device.