levelone IGP-0431 4 Port Gigabit PoE Industrial Switch User Manual
- June 6, 2024
- LevelOne
Table of Contents
IGP-0431
Industrial PoE Gigabit Switch ManuaPackage Contents
• IGP-0431
• User Manual
CE Marking Warning
CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area.
WEEE
WEEE is waste electrical and electronic equipment. It is end-of-life electrical and electronic equipment and covers virtually everything with a plug or battery. … The EC introduced the WEEE Directive in 2002 to address the environmental impacts of unwanted electrical and electronic equipment at end-of-life disposal.
FCC Certifications
This Equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received;
including interference that may cause undesired operation. 
IGP-0431
4-Port Gigabit PoE Industrial Switch, DIN-Rail, -40°C to 75°C
Overview
The IGP-0431 is a 4-port industrial full gigabit PoE switch that supports up
to 2 10/100/1000M 90W high power PoE ports and 21000M SFP ports.
Fiber ports provide 2 modes through the dip switch, 100M mode and 1000M mode
to adapt to various needs.
It supports the PoE Auto-check function, which is specially designed to solve
the problems of equipment frozen. It can automatically detect the frozen PD
equipment and restart the ports’ output of PSE, and restart the PD device. It
greatly reduces the maintenance difficulty of engineering.
It has the characteristics of reliable work, strong and durable, high-cost
performance, and so on. It can be used in security network video monitoring
system, network engineering, and other occasions.
Picture
Features
- With 210/100/1000M PoE ports and 21000M SFP ports;
- Provides 2 high power PoE ports, up to 90W single port;
- Fiber ports provide 2 modes through the dip switch, 100M mode and 1000M mode to adapt to various needs;
- Supports relay alarm for power off, network broken, and PoE off;
- Supports PoE Auto-check function, which is specially designed to solve the problems of equipment frozen.It can automatically detect the frozen PD equipment and restart the ports’ output of PSE, and restart the PD device. It greatly reduces the maintenance difficulty of engineering;
- Supports 6KV surge protection, 6KV contact / 8KV air ESD protection;
- Supports working temperature -40℃～75℃.
Specifications
Parameter
|
Specifications
---|---
Power supply| Powered by power adaptor
Range of voltage| DC 48-57V
Consumption| Self-consumption <5W
Downlink ports| Ports 1-2 10/100/1000Base-T 90W PoE RJ45
Uplink ports| Ports 3-4 supports 2 modes of 100Base-FX and
1000Base-X
PoE Auto-check| If detect the frozen PD device, restart it
Working mode of
fiber ports| It can be selected 100M or
1000M work mode by dipswitch
Relay alarm| 1 channel relay alarm output for power off, ports PoE
off, ports link down
Cable and distance| Use cat5e/6,100m max
Standard| IEEE802.3, IEEE802.3u, IEEE802.3z
Switch fabric| 8 Gbps
Though put| 5.95 Mpps
Buffer| 1M
MAC address table| 8K
Indicator| *Power: 2 red ;**
Uplink3-4: Green LEDs indicate Link/Act
Downlink 1-2: Yellow LED indicates PoE, green LEDs indicate Link/Act
Protection| Surge: 6KV, standard: IEC61000-4-5 ESD: 6KV: contact
/ 8KV: air, standard:IEC61000-4-2
Working temperature| -40°C-75r
Storage temperature| -40°C-85r
Humidity| 0-95%(No condensation)
Dimension(L X W X H)| 101 mm X 65 mm X
36mm
Material| Aluminum alloy
Colour| Black
Net-weight| 300g
Panel diagram
Attention: This
product must be well-grounded against lightning. please use better than 20#
cable to connect the grounding terminal and ground.
Attention 2: 100M and 1000M modes: It can be selected by dip switch.
Attention3: PoE Auto-check: PoE Auto-check function is open/closed by dip
switch.
The switch always auto-detect 1-2 ports whether frozen, if some ports are
frozen, the switch will restart them, but other ports are unaffected.
Application
Dimensions
Order information
| Model | Description |
|---|---|
| IGP-0431 | With 210/100/1000M 90W PoE downlink ports and 21000M SFP ports; |
2*DC48-57V power supply(Power adaptor buy extra);
Fiber ports provide 2 modes through the dip switch, 100M mode and 1000M mode
to adapt to variety needs;
Supports relay alarm function for power off, network broken, and PoE off;
Supports the PoE Auto-check function.
Digital Data Communications GmbH
Specifications are subject to change without notice. No liability or
responsibility for any errors or omissions in the content. Copyright © Digital
Data Communications GmbH,
Germany. All Rights Reserved.
www.level1.com