Sable HF033 Air Mattress with Built-in Electric Pump User Guide

Table of Contents

Caution

Household use only.
The voltage used must be AC 110-120V for US / CA, AC 220-240V for EU / UK, and AC 100V for Japanese specifications.
When using the product, do not allow sand, gravel, or small objects entering the inflation and deflation ports. Keep the pump unblocked all the time.
Stop using the pump for at least 5 minutes after continuous use for 10 minutes.
Do not ever try to put hands or fingers into the inflation and deflation ports.
Do not use the product near hot objects, such as electric stove, oven to prevent melting.
Air inside the air mattress may vary with the ambient temperature. Reinflate the air mattress if necessary.
Do not sleep on one side of the air mattress to avoid tilt or deformation.

WARNING

This air mattress can melt or burn. Keep away from ﬂames, heaters, and other hot objects.
Do not smoke on the air mattress.
Risk of suffocation
Infants have suffocated on inﬂatable mattresses. Never place infants aged birth to 15 months to sleep on this inﬂatable air mattress.
This is not a life saving device
It is not intended for use in water. It is not a ﬂotation device or a water toy.
Do not stand, walk or jump on the air mattress.
Not a toy – Do not let children play with it to avoid falls or damages to the air mattress.
To avoid damage, keep away from sharp objects.
No pets on or near the air mattress
Read the air mattress instructions thoroughly before use.

Package Content 01

(Product received is subject to the actual product)

Package Content 02

Note:

Note

Make sure the extra safety valve closed tightly prior to inﬂation by ﬁrmly pushing the tab down.

Inflating the Air Mattress 01

Open the cord storage holder, plug into a power source. Turn the knob clockwise to the INFLATE position. It takes 3 to 5 minutes to inflate.
When the airbed is fully inflated, turn the knob counterclockwise to OFF to shut off the motor. Put the cord back into cord holder.

Inflating the Air Mattress 02

To deflate, make sure nothing is on top of the mattress. Take out the cord and plug into a power source. Turn the knob counterclockwise to the DEFLATE position.
When done, rotate the knob to OFF, and put the cable back into the cord holder.
Open the air valve to let the remaining air out, then roll the bed up for easy storage.

Deflating the Air Mattress

Caution

Caution

Keep away from sharp and rough objects.
Do not drag the deﬂated air mattress on the ground.
Store in a well-ventilated place. Keep away from humidity and avoid direct sunlight.
Do not rub the folding places.

There may be some PVC smell when you receive the air mattress, which will be gone in 1 to 2 days.

Check whether the extra safety valve is securely tightened ﬁrst, if air leakage occurs.

Air Leakage

Place your ears closely to or comb your hand across the air mattress to locate the leaking area. If failed, wipe the inﬂated air mattress with mild soapy water, and air bubbles will form from the leaking area. Do not submerge the air mattress in water.
Clean the leaking area from all dirt and dry it completely. Deﬂate the air mattress.
Cut a suitable size of repair patch, press it ﬁrmly over the leaking area.
Wait for 1 hour before inﬂation.
The repair patch can only stick on PVC surface.
If you have any further problems, please contact our after sales support team. We will respond to you within 24 hours.