BZBGEAR BG-UPTZ-ND Series UPTZ camera User Guide

BZBGEAR BG-UPTZ-ND Series UPTZ camera

BG-UPTZ-ND Series

You spoke – we listened! We have taken our popular UPTZ camera and added NDI|HX functionality to create what we think is the most versatile camera on the market. This all-rounder is ideal for almost any possible application you can imagine. High grade lenses give you pristine image quality while NDI|HX support provides the ability to easily share your IP stream to multiple devices and platforms simultaneously without massive bandwidth requirements. Hallmarks of the NDI|HX protocol include low latency, support for multi-GPU acceleration, support for the most advanced compression formats currently available, and the ability to operate over a wireless network. There has never been a simpler way to connect video equipment together! New devices are automatically discovered and made available to all other systems on the network. Removing the need for running bulky cables makes video production, streaming and conferencing applications easy to deploy, manage and scale. This camera is ideal for any situation where flexibility and high image quality are the top priorities.

Package Contents

• 1 x BG-UPTZ-ND
• 1 x 12V/1.5A Power Supply
• 1 x User Manual
• 1 x RS232 Control Cable
• 1 x IR Remote Control

Wall Mounting

CAll Mounting

RS-232 Interface Definition & RS-232 Mini8-pin: Port Definition

WebGUI
The BG-UPTZ camera includes a built-in WebGUI allowing for control and management of advanced features. Use the following instructions to access the WebGUI.

1. Launch a web browser and enter the IP address of the unit (default 192.168.5.163).
2. The BZBGEAR login page will appear.
3. Enter your login information (by default Username = admin Password = admin).
4. Select the Login button.

Problems connecting to your camera?
Check out our Knowledge Base at https://bzbgear.com/knowledge-base/ for more information and step-by-step guide.

My camera has no picture| Power switch is off, bad connection, incompatible resolution, camera lens is obstructed| ·         Check the power switch on the back of the camera

·         Check connections/replace cables with new ones

·         Use IR remote or WebGUI to change to a resolution that is compatible with your display

·         Check computer and program settings to ensure USB is discovered

---|---|---
My IR remote control doesn’t work| The camera’s IR sensor is blocked, batteries are dead, sunlight is interfering with the IR signal| · Ensure you have a clear line of sight from the remote to the front of the camera base

·         Replace the batteries

·         Ensure the camera is out of direct sunlight

I cannot access the camera’s WebGUI| The camera is not connected to the network| ·         Check connections

·         Verify your camera’s IP address using an IP scanning tool

·         Ensure your computer is connected to the same network as the camera

I have no image from my USB connection| Your USB device is not being discovered| ·         Make sure you’re using a USB 3.0 cable

·         Replace the cable with a shorter one (6 feet or less)

·         Try a different USB port on your computer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>