MOTAST Hero Band III Color Screen Fitness Tracker User Manual
- June 6, 2024
- MOTAST
Table of Contents
Hero Band III
Color Screen Fitness
Tracker User Manual
Appearance Explain
Charging diagram
Strictly follow the operation shown in the figure below:
- Please use the charging stand provided with the product to charge the charging contacts on the back of the bracelet
- Plug the USB tap into the USB adapter (excluding in the packaging)
- Do not use a battery adapter with a voltage exceeding 5V and an output current exceeding 1A for charging, otherwise it will cause charging failure and damage the magnetic charging cable or equipment.
Functions Introduction
| Bracelet Time Main Page:
Display the bracelet time, day of the week, steps, and other information.
---|---
| Steps : record the current number of steps of the bracelet,Calories and
distance
| Blood oxygen: On the blood oxygen measurement page, touch the screen to
start the measurement. After the vibration, the measurement result will be
displayed. More detailed information analysis and data recording can be
synchronized to the APP to view
| Sleep : the bracelet records and shows the total sleep time you had
last night, as well as deep sleep time, light sleep time. More detailed
information analysis and data record can be viewed in the APP synchronously.
| Weather information: the weather page will display current weather, air
quality information, and conditions for tomorrow. This function works must
connect to the APP, and the phone must open GPS positioning, and allow the APP
to have access to the phone’s tocation.If you disconnect or turn off your
phone’s. GPS for a long time, the weather information will not be updated.
| Message notification: the bracelet can receive phone calls, text messages,
WeChat, QQ and other notifications and alerts on the phone, and the
corresponding push Project switch can be opened on the APP. This page can
store the last 3 message tecords.Note that this function should be connected
to the bracelet in the APP and the Settings should be completed according to
the prompts. Apple’s phone, when connected, have to select match in a pop-up
match request.
| Exercise: The bracelet shows the latest exercise time, heart tate and
calorie information. Click the exercise icon to enter the multi-function
exercise mode. You can choose to open the corresponding exercise mode
measurement.
| Blood pressure: On the Blood pressure measurement page, touch the
screen to start the measurement. After the vibrant ton, the measurement result
will be prompted. More data ied information analysis and data recording can be
synchronized to the APP to view
| Heart rate: On the heart rate measurement page, touch the screen to
enter the me asurement. After the vibrant ion, the measurement result will be
displayed. More detailed information analysis and data recording can be
synchronized to the APP to view
| Breathing training: After entering this function, the breathing
training mode is automatically turned on, and breathing training is performed
according to the animated graphics. displayed on the bracelet. Multiple
vibrations indicate that the training is complete.
| Settings: Click the settings icon on this page to view the settings:
mute/brightness. adjustment/dial/restore factory settings/ stopwatch/shutdown
and other functions.
| Music control: after connecting to the APP, the bracelet can control
the play/pause/play of music player on the mobile phone. This function must
open the mobile phone player before you can control on the smart bracelet.
| Take Photo control: after connecting to the APP, the bracelet can be
used as the remote control of the phone camera. Open the camera on the phone,
and long-press the touch screen to take photos.
Bracelet APP Installation
This product is a Wireless transmission product, and many functions need to baeconnected with the supporting APP before it can be used. Only in the APP, after the bracelet is connected, other functions can be used, such as time synchronization, call reminder and information content push, weather display, remote camera, music control, etc. (do not directly on android phones Scan the following QR code to download the APP to connect.Apple mobile phone) You can search for hero band III downloads in the APP Stroe.
http://plus.crrepa.com/app-download/heroband3
Connecting smart bracelet explain
Note: When the phone Is connected to the bracelet,it needs to keep the bluetooth of the phone open,and there is no other matching device in the bluetooth of the phone.don‘t connect your android phone directly to your mobile phone in biuetooth
APP operation instructions
-
Enter the APP movement page and press your phone screen to pull down and refresh the bracelet data.
-
Click the steps, sleep and other blocks, and enter the analysis of the daily or recent exercise and sleep data.
-
Click the exercise heart rate/blood pressure blocks to enter the data of the day or recent, or click the APP to measure the heart rate and blood pressure. The test data will be automatically saved to the phone.
Attention
- Do not charge in condition of water stains.
- This product is an electronic monitoring product, which is not used as medical treatment. The data is for reference only.
- Don’t wear this device when bathing or swimming for a tong time.
- Use the matching charging cable for charging.
Frequently Question And Answers
-
The bracelet cannot receive the reminder.
Android phone Settings:
A: make sure the APP has an alert switch on.
B: confirm whether the message can be displayed normally on the notification bar, and the notification push of the bracelet can be read Mobile phone notification message;
If there is no message in the notification bar, the bracelet will not receive the push.
(need find notification and status bar in mobile phone settings, and open WeChat, QQ, phone, SMS, Hero band Ill switch)
apple system phone settings:
A: make sure to select the allowed pairing when connecting the bracelet. can be checked in the phone Settings – bluetooth, if there is one at the backend of the connected device indicating that a pairing has been made. If there is no in the backend . there is no pairing, reconnecting after unbind.
B: open the phone settings — click on the notification — click WeChat.
QQ, SMS, phone — open the permission notice.
Displayed in the “notification center”. -
Android phones don’t connect the bracelet.
For android phones, please do not connect with the bracelet directly in the bluetooth of the phone.
Please download the APP firstly.
And go to the APP to search thr device and connect.
Restart your phone’s bluetooth and bracelet if necessary.