YANTU A31WL Air Compressor Cordless Portable Tire Inflator for Car Tires User Manual

USER MANUAL & WARRANTY A31 CAR TYRE INFLATOR
Please read the user manual carefully before operation. Note: This instruction book is a general use instruction book, please correspond parameters according to the type you purchased.

Product Introduction

1. Power Line Port: for connecting 12V DC cord.

2. Air Hose Port: for connecting air hose.

3. Digital Display: for reading tire pressure and units; CD (

4. : Multifunctional Button;
   Long press to switch on/off;
   Short press to convert units.

5. CAR: a shortcut key for setting tire pressure be 2.5kg/cm2 directly.

6. SUV: a shortcut key for setting tire pressure to be 3.0kg/cm2 directly.

7. : Start/Pause.

8. +: add tire pressure value.

9. -: reduce tire pressure value.

10. Power pilot light: Display the remaining battery power.

• : Cordless Model – With Type-C interface (Input)
  Cord Model – No Type-C interface

Model Introduction – Cord

• Specification Model: A31 Power: 120W Voltage: DC12V Power Line Length: 3m Product Size : 214x100x55mm
• Main Parts
  

• Instructions

1. Connect the gas tube on the inflator, connect one end to the car tire inflator, connect the other end to the auto tire.
2. Start the car, connect one port of power line to the car tire inflator, the other port to the car cigarette lighter.
3. Press “ ” to switch on, then press “ ” shortly again for converting units. Press ” + ” to add and press ” – ” to reduce pressure value. “CAR/SUV” is shortcut keys, press “CAR” to make it be 2.5kg/cm2 directly, press “SUV” to make it be 3.0kg/cm2 directly. Lastly, press “ ” to start. When it reaches to pressure value you desired, the inflator will be auto-off. If you want to stop it halfway, please short press ” “.
4. After inflation did, remove the gas tube from the auto tire first, from the car tire inflator next, then collect the gas tube and power line.

Model Introduction – Cordless

• Specification
  Model: A31 Power: 120W Voltage: DC12V Product Size : 214x100x55mm

• Main Parts

• Instructions

1. Connect the gas tube on the inflator, connect one end to the car tire inflator, connect the other end to the auto tire.
2. Press ” ” to switch on, then press ” ” shortly again for converting units. Press to add and press “ – ” to reduce pressure value. “CAR/SUV” is shortcut keys, press “CAR” to make it be 2.5kg/cm2 directly, press “SUV” to make it be 3.0kg/cm2 directly. Lastly, press ” ” to start. When it reaches to pressure value you desired, the inflator will be auto-off. If you want to stop it halfway, please short press ” “.
3. After inflation did, remove the gas tube from the auto tire first, from the car tire inflator next, then collect the gas tube and power line.
4. It When it is full power, the indicator light will be fully bright; When it is lower power, the indicator light will be dark gradually. Under these circumstances, a USB cable can help you to charge the battery.
5. When it is low power while inflating, it may cause not work. Under these circumstances, you can use a 12V DC cord to get power from the car battery and then keep working.

Notice: For the cordless model, the battery pack can be dismountable. This battery pack can be charged conveniently.

Notice

1. Cord Model: While cleaning/maintaining/not using, please unplug the power adaptor to make the machine power off. Cordless Model: While cleaning/maintaining/not using, please make the machine power off.
2. While inflating multiple tires continuously, please make sure the interval time be more than 10 minutes.
3. When you use a car cigarette lighter to get power, pls start the car engine to avoid car battery over power consumption.
4. It is normal that there is the deviation of 0-3PSI between preset air pressure value and displayed air pressure value when inflation did.
5. The alternative car cigarette lighter only can be used for getting power from a car battery, cannot be used for charging the battery.
6. This product is applicable for cars, bicycles, electromobility, balls, etc. Truck and coach are not available.
7. Do not use it when it is malfunctioning.
8. Please keep this product away from your kids.
9. Please store this user manual well.
10. When a lithium cell battery is scrapped, you need to rive the screw first, then take the battery out. When taking the battery, the product needs to be powered off. Finally, wrap the positive poles and negative poles of the battery with tape and put them in the hazardous waste sorting bin;
    -While disposing of, you need to take the battery out from the machine first.
    -While taking out the battery, the machine must be powered off.
    -While the battery is discarded, wrap the positive poles and negative poles of the battery with tape and put them in the hazardous waste sorting bin.

Certificate

Grade : QUALIFIED
Place of origin: JIANGSU
Surveyor: NO.0 06
Nanjing Yantu Car accessory Co., Ltd.
Address: Shengtai Road, Jiangning District, Nanjing, Jiangsu, China
Tel: 400-651-9969
www.yantuauto.com

Warranty Card

Warranty Description

Dear Customer,

• Thank you for your purchase. From now on, you will receive the after-sale service provided by our company. We provide you with 12 months warranty and strictly follow the Chinese Three Guarantees Policy. (The warranty time begins from the day of your purchase.)

1. If you find our product malfunction within 7 days and it is not caused by man-made damage, as long as the product’s appearance and packaging are in good condition, you can return goods or exchange different models or receive free maintenance.
2. If you find our product malfunction within 30 days and it is not caused by man-made damage, you can exchange the products, we will bear the shipping fee. (PS: Xinjiang, Xizang, freight on buyer’s account. This service only applies to China Mainland areas.)
3. You can enjoy 12 months of free maintenance as long as it is not man-made damage, the shipping fee is to be borne by the sender. (PS: Xinjiang, Xizang freight on buyers account. This service only applies to China Mainland areas.)

• Situations mentioned below are not given warranty but we may offer repair service where charges are applicable.

1. Normal depreciation(such as natural wear, bum-in of shell/ports)
2. Did not install, use, maintain, store product according to the user manual and cause damage.
3. The bar code/warranty card was obliterated or torn.
4. Out of warranty time.
5. Without our permission, dismounting or refit arbitrarily.
6. Product damage caused by accident/abuse, such as output short circuit, high voltage input, overwork, high temperature, inflow, mechanical damage, drop, oxidation, rust. • • Nanjing Yantu Car Accessory Co., Ltd reserves all the rights for the final arrangement and decision.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>