kevin V8 Smart Fingerprint Keyless Entry Door Lock User Guide

kevin V8 Smart Fingerprint Keyless Entry Door Lock User Guide

How To Install wejupit V8 Smart Fingerprint keyless Entry Door Lock

Breakdown

Installation Instruction

Installation Overview

• Drill holes according to the paper guide inside the lock package
• insert the lock latch into the door
• lnstall the square iron stick & outside lock housing
• install the inside lock housing

Install The Lock Latch

• lnsert the lock latch into the door and tighten up with 2pcs screws M4x20
• lnstall the strike plate and fix it with 2pcs self-tapping screws.
  • The latch should face to the outside deadbolt.
  • 2 fixed screws in line should be parallel to the door edge.
  • The previous strike plate must be removed

Install The Square Spindle & Outside Chassis

• lnsert the square iron stick across the latch, if the door thickness is less than 2•. the spring side should face the inside chassis. (Note: If the door thickness is over ?, the spring side should face the opposite direction).
  

• Tighten up the 3pcs connection rods to the outside chassis and make the two arrowheads face each other.
  

• Insert the square iron stick smoothly across the latch. Make sure the stick edge slides into the hole on the outside handle. Get the wire on the handle across the space.
  

Install The Inside Chassis Unit

• Pass the wire through the rectangular hole on the base mounting plate and then fix the plate on the door with 3pcs M4x30.
  

• Connect the wire to the battery cable on the inside chassis

• Insert the square iron stick into the inside handle. Please arrange the wire in the empty space and make sure the wire is fixed.
  

• Install the inside chassis onto the mounting plate and fasten it with 4pcs M4’12 screws

Install The Battery

• lnstall 4 new AA Alkaline batteries

• Slide the battery cover down and then tighten up with the screw
  

• Never mix new batteries with used batteries.

Testing Lock

• You should be able to push down and lift up the handle.
• You should be able to unlock the lock with mechanical keys.
• You should be able to add users and program the lock by following the operation instruction.

Note:You can contact our customer support team for the installation video.

Scan the QR code with your phone and watch the Installation Guide video on YouTube.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>