EM Phaser Upgrade System for BMW vehicles User manual
- June 4, 2024
- EM PHASER
Table of Contents
Upgrade System for BMW vehicles
EM-BMWF1
EM-BMWR1
INSTALLATION & OPERATING MANUAL
EM-BMW Series Plug & Play Component systems
Congratulations!
On your purchase of this EMPHASER retrofit system for BMW vehicles. If you
plan on installing this speaker system by yourself, please read the following
instructions carefully before you attempt the installation. For any further
information about this product, please contact your authorized EMPHASER
dealer.
ABOUT THIS LOUDSPEAKER SYSTEM
All components of this loudspeaker system have been carefully selected and precisely matched. The Aluminum membrane of the midrange speaker is due to its hardness and the high natural resonance frequency ideally suited for a detailed and extremely low-distortion reproduction quality in the intended area of application. The 25 mm Silk dome tweeter convinces with its brilliant sound and the ability to produce even the finest musical details. At the heart of the systems are the elaborately designed crossovers: the parts have been defined in intensive test series in the laboratory as well as in the vehicle, to achieve the best possible phasing of the tweeters and midranges in the crossover frequency band. The result is immersive musical enjoyment with vivid natural voices and instruments and their positioning on the imaginary soundstage as well as an impressive depth of soundstage. EMPHASER wishes you a lot of fun with this outstanding speaker system.
SET CONTENT
Please check if all the parts listed below are in the packaging. The system consists of the following individual components:
- 2 woofers (EM-BMWF1 only)
- 2 tweeters (EM-BMWF1 only)
- 2 coaxial speakers (EM-BMWR1 only)
- 1 instruction manual
Please contact your authorized EMPHASER dealer if the contents of this set are incomplete or if parts have been damaged in transit.
ASSEMBLY
This kit is compatible with a wide range of BMW vehicles. For step-by-step
instructions on how to correctly remove your vehicle’s original speakers,
please contact your BMW service workshop. The following instructions for the
BMW F30 model are intended as an example for all models. For the EM-BMWF1, a
tweeter mount is required in the mirror triangle. You can obtain this
component from your BMW service workshop if it is not already in your vehicle.
Use a plastic wedge to carefully pry out the trim strip on the door handle.
Start at the lower end and work your way forward piece by piece. This trim
strip has a hook at the rear end in the shape of an “L”. Therefore, first pull
the trim strip towards you, until all the clips are released, and then pull it
forwards to be able to remove the trim strip completely. Now loosen the two
screws that are located at the red arrows in the picture.
In the last step, carefully remove the door panel off the door with a wide
plastic wedge. It is recommended to start at the bottom and work your way up
carefully. Also, pull the door panel in the window area away from the window
towards you to release the metal clips. Once all the plugs and clips have been
released, slide the trim upwards over the door pin.
If you want to remove the trim completely, remove the Bowden cable from the
door opener and unlock the connector of the window regulator console.
The original speaker is fixed with three Torx screws. Replace it now with the EMPHASER speaker.
EM-BMWF1 ONLY
Midrange speaker mounting
Connect the original plug to the supplied EMPHASER crossover to the input
cable “Input”. Connect the cable marked “Woofer” to one of the two free plugs
on the EMPHASER speaker.
Tweeter mounting
The tweeter mount is integrated into a trim piece that frames the entire
window and is secured with brackets. The easiest way to remove this trim is to
start at the mirror triangle and loosen these clips piece by piece.
Remove the tweeter from its mount and click on the EMPHASER tweeter. Feed the
cable back down out through the structure provided on the foam piece. Reattach
the window frame trim to the window frame in reverse order. Connect the
tweeter cable to the still free “Tweeter” connector of the EMPHASER crossover.
Reassemble the door frame trim in reverse order.
EM-BMWR1 ONLY
Connect the plug of the original speaker cable to the matching counterpart of
the included EMPHASER crossover. Connect the other wire of the crossover to
one of the two free plugs on the EMPHASER speaker.
Mount the door panel in reverse order.
WARRANTY CONDITIONS + LIMITATIONS
What products are covered by EMPHASER’s Limited Warranty?****
The Limited Warranty (the “Warranty”) applies to EMPHASER products purchased from an authorized dealer by end customers in the European Economic Area or Switzerland (“Territorial Scope”).
What is the validity period of EMPHASER’s Warranty?****
Under this Warranty, EMPHASER warrants, for a period of 2 years, that the product is free from defects in material and/or workmanship at the time of the original purchase. This 2-year period commences on the date of the original purchase as per the original invoice or until receipt. If you have purchased the product as a consumer, and the defect is identified within the first six months after the original purchase (see above), we will assume that the defect already existed at the time of purchase.
Who can claim under the Warranty?****
EMPHASER grants the limited Warranty to natural persons only, who purchased the relevant product primarily for personal use.
What is covered by the Warranty?****
EMPHASER warrants that the product is free from defects in material and/or
workmanship at the time of the original purchase. EMPHASER does not, however,
provide a warranty covering every defect and damage that may occur. It only
covers the hardware components of the device and in no event is the software
used with the device, regardless if this was provided by EMPHASER or the
third-party vendor. The Warranty, therefore, does not cover the following
cases, in particular:
normal wear and tear (such as to surfaces and protective coverings);
superficial damage, such as scratches, dents, and damaged plastic, worn or
mechanically defective connections;
misuse, including any treatment resulting in physical or superficial damage,
such as a cosmetic defect, to the product;
damage caused by connecting or using the product for a purpose other than
those specified, or a failure to observe the operating and/or installation
instructions for the particular model;
installation or use of the product contrary to the applicable technical
standards, or the safety regulations in the country in which the product is
installed or used;
damage caused through an unauthorized attempted repair or an attempted repair
by someone other than an EMPHASER authorized service partner;
damage caused by modifications to the product not expressly authorized by the
manufacturer;
damage caused by malicious code (“Software Viruses”) or by using software not
supplied with the product or which was incorrectly installed;
use of third-party vendor software programs for editing, modifying, adapting,
or extending EMPHASER’s authorized software components as are run on the
product;
use of third-party vendor firmware/operating system software
damage caused by liquids or chemicals of whatever type, and/or excessive
temperatures, moisture, or damp;
accidents drops, or other such effects of extreme accelerating forces;
damage caused by lightning strikes, electrostatic charge, incorrect operating
voltage, water, fire, force majeure, inadequate ventilation for other reasons
for which EMPHASER is not responsible;
damage caused by using the device outside of the defined specifications;
damage caused by using the product with other systems or devices, which are
not designed to be used with this product;
adjustments or modifications without EMPHASER‘s prior written approval,
including product upgrades extending beyond the specifications or
characteristics described in the operating manual;
modifications of the product for the purpose of adapting it to national or
local technical norms or safety standards of countries for which the product
was not expressly designed or manufactured;
using service or spare parts not produced or distributed by EMPHASER;
using the product in connection with accessories not approved for use with
this product;
EMPHASER, moreover, does not warrant (expressly, implicitly, statutorily, or
otherwise) the quality, performance, reliability, or suitability of the
product for a particular purpose except as described, nor does the
software/firmware installed on the device ex works.
No warranty service will be provided, moreover, if the model number
/serial number/UUID/product number on the product is changed, erased, made
illegible, or removed. The same applies if the receipt or invoice is
incomplete and/or illegible when presented.
Is EMPHASER liable for other defects or damage?****
EMPHASER will repair or replace products, only if they are covered by the
terms of this Warranty. EMPHASER is not liable for any material or intangible
loss or damage such as the price paid for the product, loss of profits,
revenue, data, or relating to the enjoyment of the product or components
associated with it, arising directly or indirectly under this Warranty or
otherwise in relation to products or services. This likewise applies to loss
or damage relating to the impairment or operational failure of the product, or
devices associated with it, caused by defects or the non-availability of the
product during the time it is with EMPHASER or EMPHASER’s service partner, as
well as to periods of downtime and business interruptions. In addition,
EMPHASER does not accept any liability for shipment-related risks – such as
the loss or destruction of the product – in connection with the fulfillment of
the Warranty.
This disclaimer applies to losses of damage irrespective of the legal basis,
especially on the grounds of negligence, other wrongful conduct (torts),
breach of contract, express r implied guarantees, and strict liability (even
if EMPHASER or its service partner has been advised of the possibility of such
damage occurring).
If these disclaimers are prohibited or limited under the applicable law,
EMPHASER will limit its Warranty and liability to the extent permissible under
the applicable regulations. For example, some national laws prohibit the
exclusion or limiting of damages payable in connection with negligence, gross
negligence, willful wrongdoing, deceitful conduct, and other such acts. For
the duration of this Warranty, all liability that cannot be excluded
completely will be limited to the extent permissible under the applicable law.
Liability under this Warranty is limited to the price paid for the product. If
the applicable law only permits higher limits on any liability, this higher
limitation will apply.
How do I exercise my Warranty rights?****
If you want to exercise your entitlements under this Warranty, please contact
the authorized dealer where the product was purchased, and present it with the
original copy of the till receipt or invoice. Do not return any products to
EMPHASER directly, otherwise, our Warranty obligations cannot be fulfilled.
You will find the name of the relevant dealer or reseller on your proof of
purchase.
Defective devices sent by the authorized dealer to the service center must
also be accompanied by any accessories with a logical connection to the
observed fault. This means, for example, the navigation package on an SD or
microSD card supplied or purchased with the device, if problems or functional
errors were observed in connection with the navigation function.
How will EMPHASER fulfill its Warranty?****
EMPHASER or its service partner will choose to either repair or replace the
product or its defective parts covered by the Warranty and assume the costs of
material and labor in doing so.
Repairs under the Warranty must be carried out by EMPHASER or its authorized
service partner. Products that are repaired or replaced may contain new and/or
refurbished components and devices. Components that are swapped out will
become the property of EMPHASER.
Will I incur any costs in connection with the Warranty service?****
EMPHASER assumes the costs of material and labor in connection with its Warranty service. The Warranty holder is responsible for the costs of shipment and bears the risks connected with the shipment (see above). If the product is found to be operating faultlessly, or there is no warranty entitlement because the warranty period has expired or for any other reason, EMPHASER or its authorized service partner will be entitled to charge a flat-rate investigation fee of €30.00.
Does this Warranty affect my statutory or contractual rights?****
This Warranty is made voluntarily by EMPHASER, and it will, in any case, extend your statutory rights. As a consumer, you remain fully entitled to your statutory rights, such as the statutory guarantee. This Warranty also has no effect whatsoever on your contractual rights against the reseller. You may continue to exercise these rights in full.
WARRANTY SLIP / GARANTIEKARTE
MODEL: ❏ EM-BMWF1 ❏ EM-BMWR1
Date of purchase:————————-
Your name:————————————–
Your address:————————————
City: ———————————————-
Country:——————————————
Your phone number: ————————–
Dealer’s address & stamp
Installation Approval
❏ Installed by an authorized dealer
❏ Self-installed by customer
Installation date:——————-
Inspected and approved by:——————
EMPHASES
Manufacturer:
ACR, Brändli + Vögeli AG, Bohrturmweg 1, CH-5330 Bad Zurzach, Switzerland
Phone: (+41) (0)56 269 64 64, Fax: (+41) (0)56 269 64 65,
mail@acr.eu, www.acr.eu
EU Legal Representative:
ACR S & V GmbH, Industriestraße 35, D-79787 Lauchringen, Germany
NOTES
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>