Optoma DC552/DC556 Document Camera User Guide
- June 6, 2024
- Optoma
Table of Contents
Optoma DC552/DC556 Document Camera
Knowing the Parts
- Camera Head
- LED Lamp
- Control Panel
- Audio Output Port
- Audio Input Port
- SD Card Slot
- RS232 Port
- Anti-theft Slot
- Remote Control Signal Receiver
- DC 5V Power Socket
- USB Port
- VGA Output Port
- HDMI Output Port
- Speaker
- VGA Input Port
- HDMI Input Port
- Microphone
- USB Port (For USB Flash Drive)
- Remote Control Signal
- Receiver Carrying Handle
Power On
- Plug in the power cord.
- Press the Power button to turn on the Document Camera.
Connecting the Output Display
- Turn on projector or any display device
- Connect a VGA Cable to VGA OUT Port (or HDMI Cable to HDMI OUT Port)
- Connect the other end of VGA Cable to VGA In Port (or other end of HDMI Cable to HDMI In Port) of your projector or display device.
Setting the OSD Language
- Press the MENU button
- Select Setting→Language.
- Use Right/Left Arrow to adjust and press OK ) to confirm.
Working with Smart DC Pro software
1. Make sure the USB connection setting is at “PC-Cam”.
2. Connect device and PC with accessory USB cable.
3. Start Smart DC Pro on your PC.
Notices for Operation
- Please use only one hand to rotate the upper base of the camera head gently.
- To Prevent your eyes from damaged, please do not look directly to the LED lamp.
- Choose the focus mode according to distance to object : Normal mode for 3cm to ∞@1X ; 30cm to ∞@17X. Macro mode for 3cm to ∞.
*Optical zoom won’t be available when in MACRO mode.
Basic Operation
For more information please visit www.optoma.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>