BAUHN ATV40FHDS-0320 Remote Control User Guide
- June 6, 2024
- BAUHN
Table of Contents
BAUHN ATV40FHDS-0320 Remote Control User Guide
1 Have you got everything?
You will also need:
- Phillips-head screwdriver
- Someone to help lift the TV
Unpack the box (be gentle) and make sure all of these items are there:
- A. 40″Full HD Smart TV
- B. Remote Control
- C. AAA Active Energy Batteries (2)
- D. TV Stands (2)
- E. Screws for TV Stands (4)
- F. Warning Sheet
- G. TV Toppling Safety Message
- H. Quick Start Guide
- I. Warranty Certificate
- J. General Safety Warnings
- K. User Manual
2 Attach the TV stand
Unless you are wall-mounting the TV, you will need to attach its stand/legs. If you do want to wall mount the TV, see page 7 of the User Manual.
- Lay the TV face-down on a soft, flat surface (like the sofa, or a towel on a table) larger than the TV itself.
- Match the stands to the installation points on the underside of the TV.
- Attach the stands to the TV at the installation points using the screws provided. (Grab a screwdriver for this bit).
3 Which plug goes where?
Want to hook up your new TV to a gaming console or something else? Use the basic guide below to see what the plug and port should look like for different connections.
You can find more of these on pages 10 – 11 of the User Manual.
(These cables do not come with your TV)
4 Get to know the remote
Familiarise yourself with the remote control – you’ll be spending a lot of time together. Here are some of the buttons you’ll be using most often.
5 On-screen set-up
Follow the on-screen set-up prompts to set your country and language, read and accept the license agreement, connect the TV to the internet, and tune TV channels.
Note: If you choose to setup Netflix or select an input source other than DTV, the set up wizard will exit and will not let you tune TV channels. To tune channels, go to: Menu > Channel > Auto Tuning.