Alcatel SD602 Heavy Duty Video Access Control User Guide

: June 6, 2024
: Alcatel

Table of Contents

Description
Port Definition
Wiring instructions
Mounting
Setting DSS key
5-Access Control Setting Options
Customer care
Read User Manual Online (PDF format)
Download This Manual (PDF format)

S D602 Alcatel SD602 Heavy Duty Video Access
Control

Quick guide

Description

Alcatel SD602 Heavy Duty Video Access Control -
Description

1. Camera	1. RFID reader
2. IR Light	2. Keypad
3. Speaker	3. DSS key
4. Mic

Visual indicators

| Status| Description
---|---|---
Lock| | Door unlocking
| Door locked
Call Status| | Talking state
| On look
| Ringing or call hold
| Card using state
Network & SIP Regist| | SIP Registration succeeded
|
| The network is normal, SIP not registered
| Network error
Ring| | Ringing
| on hook

Port Definition

Alcatel SD602 Heavy Duty Video Access Control - Port
Definition

LAN	Network connector
J1	jumper
CM2	power and lock connector

LAN: Network Connector Alcatel SD602 Heavy Duty Video Access Control -
Network Connector CM2: Power and lock connector

1	2	3	4	5	6	7
+DC12V	VSS	NC	COM	NO	S-IN	5-0101″
12V DC In	Electric- ock switch	Indoor switch

Jumper Alcatel SD602 Heavy Duty Video Access Control -
Jumper

Mode	Description
P(Passive Mode)	For locks requiring more than 12V/700mA; an external power

supply is required
Electric lock interface provides simple contact output, normally open or dosed
Default mode.
An (Active Mode)| For relays requiring less than 12\/700mA Electric lock interface will provide 12V
output

Lock: Electric lock type
Fail-safe: power OFF unlocked – power ON locked
Fail secure: power OFF locked – power ON unlocked

Wiring instructions

MODE	LOOK	J1	CM2
Active	Passive	fall save	Fall secure
√		√

fig](https://manuals.plus/wp-content/uploads/2021/12/Alcatel-SD602-Heavy-Duty- Video-Access-Control-fig-300x178.png)
√| | | √| | Alcatel SD602 Heavy Duty Video Access Control -
fig
| √| √| | |
| √| | √| |
| √| √| | |

2-Wall mounting
@ Checklist

Drilling Alcatel SD602 Heavy Duty Video Access Control - Wall
mounting1 Remove back pannel

Alcatel SD602 Heavy Duty Video Access Control - back
pannel

Hanging the wall mount bracket and cabling Alcatel SD602 Heavy Duty
Video Access Control - bracket and cabling Line connection Alcatel SD602 Heavy Duty Video
Access Control - Line connection

Note: Before dosing the unit verify connections are functional: press the # button for 3 seconds to get a voice announcement of the device’s IP address.Input access password or press the indoor switch to check electric- lock installation

Mounting

1. To set up your system you will need to find out the IP address of your CD602. Press and hold the “#” key for 3 seconds: a voice announcement will read out your CD602 IP address.
2. Open a web browser on our computer. Enter HTTP:// and the IP address in the address bar
3. Default login and password: admin/admin for an administrator.
Note: your system uses DHCP by default to acquire an IP address. If you wish to switch to fixed IP (default address 192.168.1.128), press and hold the DSS Key for 10 seconds until you hear a beep. Then press the
DSS key 3 times. After 1 0secs the IP address acquisition mode will have changed.

**4- SIP Door Phone Setting

** Go to SYSTEM» SIP Accounts. Configure at least SIP proxy address and port, phone number, and authentication name and password. Select “Activate”, and click “Apply” to save.

Setting DSS key

Go to PHONE» Function Key. For a quick start, set the DSS key as Quick Dial (see figure above), with your desired destination numbers.

5-Access Control Setting Options

Private access code

Go to ACCESS>>Access Control Settings>>Add Access Rule. Enter private Access Code and press Add. To open the door, input this access code and press the # key on the door phone numeric keypad.
Remote password

RFID Card 1. Go to PHONE>>Features>>Doorphone Settings >> Card Reader Working Mode>>Set to Card issuing state.
2. Register one or more RFID cards by approaching them to the CD602 card reader area. The phone will beep after each successful registration.
3. Add an access rule for each card through ACCESS>>Access Control Settings>>Add Access Rule>>Add a Name and select your Card ID from the drop- down list. Then press Add
To open the door approach an authorized card to the CD602’s RFID reader area.
Note : remember to return your CD602 Card Reader Working Mode to a Normal state after you have issued the cards.
Declaration of conformity for the European Community

The CE logo shown on the products indicates that they are compliant with the basic requirements of all the applicable directives. You can download the declaration of conformity from the following address: www.swissvoice.net

Environment English: This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. Help us to protect the environment in which we live!
(a)- If you are a professional user, please follow your supplier’s instructions.
(b)- If the appliance is rented to you or left in your care, please contact your service provider.
Please help us protect the environment in which we live!

Customer care

For quick assistance, please refer to the user guide. Our Swissvoice reseller will be happy to help with any further questions related to your Swissvoice terminal.
Notice of copyright and trademarks
Copyright ©2018 Atlinks Europe. All rights reserved. Atlinks Europe reserves the right to change the technical speciﬁcations of its products without prior notice, so as to make technical improvements or respect new regulations. Alcatel is a trademark of Nokia used under license by Atlinks.