MAXHUB UC P20 UHD 4K PTZ Camera User Guide
- June 6, 2024
- MAXHUB
Table of Contents
MAXHUB UC P20 UHD 4K PTZ Camera
Introduction
The UC P20 is a professional 4K PTZ Camera with a lot of functions, features and connectivity for a variety of applications. It can be connected simultaneously via the 3G-SDI (BNC), USB 3.0, RJ45 or the HDMI 2.0 connectors. The RJ45 connection will be capable of sending out RTMP/RTSP Streams (2 Streams in different formats), supports PoE (Power over Ethernet) and is used to setup the UC P20 with your computer via a Web-Browser interface (best use IE).
The Audio Line Input is very useful to get lip-synced Audio with your recorded or streamed Videos. At the front of the Camera, there is a Display, which will show you the current TCP/IP and Video resolution settings of the UC P20.
RS 232 & RS485 are also available for 3rd party remote control. The Resolution of the Camera is 4K UHD, 60fps with a 71° HFoV, using a SONY 1 / 2.5-inch CMOS image sensor. The 12x optical Zoom, and an additional 16x digital Zoom plus very silent PTZ motors will make the UC P20 your best choice for every pro-grade Conference Room or Recording / Streaming application. Other high-quality specs are the 2D and 3D DNR and the unique Low-Lux technologies. Even in very low-light conditions, the picture will stay crisp and clear. The signal to noise ration is < / = 55dB and above.
Pan +/- 170°, Tilt +/- 30°. 255 Presets can be programmed and instantly recalled via the IR Remote Control, which comes with the unit. The mounting bracket is also included.
SETUP
Please connect the UC P20 to the included PSU , or connect the RJ45 port to a Switch which provides PoE. Please turn the unit on, and check the Display at the front side to read the default setting for the TCP/IP number.
Connect a PC/Laptop via a CAT cable, either directly to the RJ45 port, or to the same Switch which connects and powers the UC P20. Open your Web browser (best to use is IE) and enter the same TCP/IP number, so you can connect to the UC P20. After the login window pops up, please use „admin“ as User and „admin“ as Password, to login. Here you can set: Network, PTZ , Control Port, Preset and Streaming settings. Please also make sure you have a Video Player installed on your device (i.e. VLC ) then in the login Window, you will also see the Camera picture on your screen. With the enclosed IR Remote Control you can additionaly change or set the most important parameters of the Picture and Video format. To see all possible Video Resolutions or other settings, please refer to the UC P20 User Manual which you can find here: www.vvvvvvvv.com
Please make sure you purchase a pair of AAA batteries, so you can insert them into the IR Remote Control of the UC P20.
Setup view in Web Browser
Now you can connect the UC P20 either via the USB 3.0, HDMI, Network, or the 3G-SDI port to any Display you want to use. Please make sure your Display provides a 4K 60fps resolution, which is the maximum the UC P20 will support. All 4 Video Output ports can also be used simultaneously.
If you want to use a 3rd Party control unit via RS232 or RS 485, please make
sure to use the VISCA, Pelco-D or Pelco-P protocol and a cable which fits to
the apropriate connectors on the UC P20. (An RS232 Cable is included in the
package)
APPLICATIONS
APPLICATIONS
Meeting Room
ou can easily use the UC P20 for every Meeting Room application you can
imagine. Even larger Rooms are no issue, due to the presets you can save. Just
mount the Camera on top of your Display using the included mounting bracket
and use the IR Remote Control to focus on the space or the people you want to
see and save the Preset by pushing the Preset button, followed by any No. on
the IR Remote. To recall a Preset, just push the No. button once. Of course,
you can also program your Presets via the Web Browser and also define how fast
the Pan, Tilt and Auto-Focus will be recalled.
**Zoom out
**
**Zoom in
**
Sometimes you might also need to record a meeting, where you need a PTZ Camera to be placed at the rear side of the room, no problem with the UC P20. Just set the Zoom and Focus to the perfect field of view and “off you go” with your Meeting recording. Please keep in mind, that the Audio Input of the UC P20 will help you to get a lip-synced Audio signal with your Video, wether you record or Stream your meeting, it will be always perfect in sync and no more editing or “delaying” is needed afterwards.
Lecture Hall
Another perfect application to use the UC P20 is a Lecture Hall, wher you want to record the learning session with Teacher and Students. Due to the professional Sensor implemented, you will be able to cover very long distances. Plus, you can easily create Presets, if you want to Zoom in onto the Whiteboard. Again, Streaming is another case used very often in this application and the UC P20 will be very powerful and reliable 4K PTZ Camera to help you to solve all needs. Don‘t forget the Low-Lux Technology, 2D & 3D Denoising and WDR capabilities, which will always provide a clear and crisp picture, even in very low light conditions.
Church, House of Worship
Here you go with an easy setup and a true „problem solver“ for these applications. In most cases you might need to install two or more 4K PTZ Cameras, to be able to get a full picture of the whole service in Church or the House of Worship. Zoom in to the Pastor or Preacher, show the musicians on stage, or simply Stream the whole service, including a scene from the audience. Everything is „easy setup“ and you get great Videos with the MAXHUB UC P20.
If you have any further questions to the products or applications mentioned, or any issues with the setup, please contact your MAXHUB sales or support agent in your country.
Have fun with the MAXHUB products and a good success during your conferences!
your MAXHUB Team
www.maxhub.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>