MAXHUB MSA10 Integrated Video Conference Terminal User Manual
- June 4, 2024
- MAXHUB
Table of Contents
MAXHUB MSA10 Integrated Video Conference Terminal
Note
The product images are for illustrative purposes only and may slightly differ
in appearance, colour, size, etc. from the actual product.
Safety Warning and Precautions
Before using and operating this device, please read thoroughly and comply with
the following precautions in order to prevent accidents or abnormal operation.
Operating Environment
- Do not place the product in dusty and humid environments in case of internal short circuit.
- Do not place the product near heating devices(such as electrical heater).
- Operating temperature is 0-40℃, operating humidity is 10%-90%RH.
- Please use the product accordingly.
Children Safety
The product and accessories may contain some small parts. Please keep them
from children to avoid accidental swallowing or danger.
Power supply
Please use the standard power adapter.
Keep Dry
The product is NOT water proof. Please keep it dry.
Statement
Intellectual property right statement
- The patents cover the hardware design and software of this product.
- Anyone reproduces the product or the contents of this instruction without prior written permission from the Company shall be liable to legal prosecutions.
- The description, illustrations, etc. in this document may subject to change per the latest product specification and performance.
- The product images are for illustrative purposes only and may slightly differ in appearance, colour, size, etc. from the actual product.
- The Company reserves the rights to improve and change the appearance and design of the product without notice. Note: Users may find the type approval code of this product on the product’s nameplate.
Accessories introduction
Please check the following items in the product box.
| HDMI cable x1 | Wall mounted x1 |
|---|---|
| Peeping cover x1 | Power adapter×1 |
| Use manual x1 | Remote control x1 |
| USB cable×1 |
Product Function
Please familiarize yourself with the interface and buttons of the device before using this device.
- HDMI OUT :Connect to the devices with HDMI input function
- POWER Tap to enter energy saving ,press and hold for at least 2 seconds to enter standby mode
- AUX IN/OUT: Used for external audio equipment
- 3.0：USB 3.0,used for upgrading and connecting with external mouse/keyboard
- LAN: Connect RJ45 terminals
- 2.0Device,can be connected to a computer through a USB Type-A to Type-C data cable, providing the computer with camera, microphone and speaker.
- DC: Used for 12V power input power supply
- Camera: Shooting performance
- Hanging components.
Mounting
- Placed directly on the desktop.
- Wall-mounted
- Fix the bracket onto the Wall with screws, then place the integrated video conference terminal onto the bracket.
Use with panel
Fix the bracket onto the supporting bracket with screws, then place the integrated video conference terminal onto the bracket.(The bracket needs to be purchased separately. 20cm between the radiator and any part of your body.
Note
The connection of different samples may slightly differ. Please refer to the
actual product.
Quick Start
- Please use HDMI cable to connect this product to the monitor.
- To turn on the device, press the power button on the back of the product or use remote control.
- For the first use, please complete the network connection and device activation during device boot.
- After successful activation, this product function would be fully functional.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution
The user is cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of
Non modification Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- This device may not cause interference.
- This device must accept any interference, including interference.
This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body exposition, distance device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference.
7668 RF & Power
| Frequency Range | Output Power Max |
|---|---|
| 2412 to 2472 MHz | 19.17 dBm |
| 5150 to 5250 MHz | 19.23 dBm |
| 5725 to 5825 MHz | 13.02 dBm |
- Antenna Type: PCB
- Antenna Gain: 2.4G WIFI 2.44dBi
- 5G WIFI 5150 to 5250 MHz 2.02dBi
- 5G WIFI 5150 to 5250 MHz 2.85dBi
- Antenna Impedance:50Ω
8821 RF & Power
| Frequency Range | Output Power Max. |
|---|---|
| 2412 to 2472 MHz | 18.67 dBm |
| 5150 to 5250 MHz | 12.54 dBm |
| 5725 to 5825 MHz | 12.44 dBm |
- Antenna Type:FPC
- Antenna Gain: 2.4G Wifi 5.95dBi
- 5G wifi(5150 to 5250 MHz)3.48dBi
- 5G wifi (5150 to 5250 MHz )2.32dBi
- Antenna Impedance:50Ω
Hereby, Guangzhou Shrui Electronics Co., Ltd. declares that the radio equipment type UC S10 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.maxhub.com
This symbol, affixed to the product or its packaging, indicates that the product must not be processed with house hlod waste. It must be brought to an electric and electronic waste collection point for recycling and disposal. By the appropriate disposal of this product you also help in preventing potentially negative consequences for the environment and human health. The recycling of materials helps preserve our natural resources. For further information regarding the recycling of this product, please contact your municipality, local waste disposal center or the store where the product was purchased.
Remote Control
- a. Power Button ,press to start the power off countdown.
- Press and hold for 3 seconds to power off.
- b: Volume Button, press to adjust the system volume.
- c : Digital Zooming, press to digitally zoom the camera.
- Available only when auto framing is disabled.
- After zooming in, the direction button may move the picture.
- d. Direction Button: Press the direction buttons to move the camera or selection.
- e. OK Button: Confirm the selection. During digital zooming, press this button would restore the default view.
- f: Mute Button, press the turn on or off the microphone.
- g : Return Button: Press to return to previous menu or quit an app.
- h: Menu Button, press to invoke the menu in different interfaces.
- i. Number keys and numerals.
- j: Auto Framing Button: Press to type in #
- Press and hold to enable/disable the auto framing feature means open Means off.
Presets
- Set and switch the presets in settings.
- Press and hold the number button 1/2/3 for 2 seconds to save the current view as a preset.
- Each preset may including zooming level, viewing angle information.
- Up to three presets are supported.
- Press 1/2/3 to switch amongst the presets.
NOTICE
The terms HDMI and HDMI High Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>