microlife BP3GUI-8X-A6 Advaced Blood Pressure Monitor User Guide
- June 6, 2024
- microlife
Table of Contents
microlife BP3GUI-8X-A6 Advaced Blood Pressure Monitor
PLEASE READ BEFORE YOU BEGIN
FREQUENTLY ASKED QUESTIONS
Q.What do my blood pressure numbers mean?
A. Blood pressure is determined by the circulatory center in the brain
and is made up of two numbers:
Systolic (the first number): shows how much pressure the blood is exerting
against the artery walls as the heart contracts (pumps).
Diastolic (the second number): shows how much pressure the blood is exerting
against the artery walls while the heart rests (between beats). In addition to
blood pressure, its important to monitor the pulse, or the number of times a
heart beats in a minute.
Q.My blood pressure varies. How do I know what my true blood pressure is?
A. Just as a time lapse video tells more than a snapshot, the average of
several measurements, obtained over several days under similar conditions, is
the best way to accurately determine your blood pressure. It’s vital to
measure your pressure consistently and regularly to better manage your health.
See chart below for daily variation.
TIP: If you still feel your results are inaccurate, there is no need to return the unit. Instead, call 1-800-568-4147 for assistance.
FOLLOW THESE STEPS FOR BEST RESULTS
- Make sure the cuff tube is securely connected to the monitor.
- Slide your arm through the cuff until the bottom edge is about ½” above your elbow. Align artery mark and tubing to brachial artery (inner arm). Cuff fits most biceps 8.7″ – 18.1″.
- Tighten the cuff until it is snug against your arm, but not too tight. You should be able to fit 2 fingers between cuff and arm.
- Sit and rest for 5 minutes prior to measurement. Relax your arm and push the start button.
TROUBLESHOOTING GUIDE
Q.Why are my blood pressure readings different than at my doctor’s office?
A.Blood pressure is a variable body parameter that fluctuates throughout the
day. To compare your pressure levels, you should perform a daily measurement
under comparable situations. Make sure that you feel relaxed and are not
disturbed by your environment. In addition, check for proper cuff fit,
tightness, and artery alignment. If you still need assistance, call
1-800-568-4147.
Higher readings: Many experience what is called “White Coat Hypertension” when
measured by a doctor. White Coat Hypertension refers to blood pressure that
rises above its usual level when measured in a clinical setting, such as a
doctor’s office (versus at home). It is named for the typical white coat
uniform worn by health care providers.
HOW CAN I ENSURE AN ACCURATE MEASUREMENT?
-
Always measure using the same arm, at the same time of day.
-
Avoid eating, tobacco or any form of exertion before you take your measurement.
-
Make sure your bladder is empty.
A full bladder can increase systolic pressure by 10-15 mmHg. -
Ensure clothing does not interfere with the cuff.
A cuff over clothing can raise systolic pressure by 40 mmHg. -
Sit quietly at a table with both feet flat on the floor, avoiding movement and talking during a measurement.
Talking can raise systolic pressure by 10-15 mmHg.
BEFORE RETURNING
PLEASE CALL 1-800-568-4147
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>