SAMSUNG SDS SHP-H60R Digital Door Lock User Manual

: June 6, 2024
: SAMSUNG SDS

Samsung SDS

SAMSUNG SDS SHP-H60R Digital Door Lock

WiFi Function
App based user service using the WiFi function

Double Authorization Function
Both a password and a keytag are required to unlock your door lock, to strengthen its security.

Silent Mode
When going in or out, the sound of the key entering and door opening will be suspended.

Security Assurance Function
When someone is inside the house, authorization for entry from the outside will be prohibited.

Away Security Function
When a user is outside the house, if the inside of the door lock is used, an alarm is generated.

High-Temperature Alarm
If the inside of a house has a very high temperature, the door lock will be automatically unlocked.

Safety Cautions

This section contains important information to ensure the user’s safety and prevent potential damage to property.
Please, read this section carefully and use the product accordingly.

The user shall not install or repair the product without authorization.
Do not install the product in the place where the gap between the door and the frame is 5 mm or more.
Long-term exposure to direct sunlight may cause a crack on its touchpad. Avoid exposure to direct sunlight.
Do not use excessive force or sharp objects to push the lock buttons, as this can damage the product.
Do not operate the product with wet hands, and keep liquids such as water or drinks away from the product, or the product may malfunction or be damaged.
Do not use water, benzene, or alcohol when cleaning the product, but use a soft dry cloth.
Make sure that the door is completely closed when going outside.
Make sure that no unauthorized person has access to the password. Change it regularly.
Be sure to correctly match the ends (+/-) when installing the batteries. Wrong insertion direction or ends of batteries may cause batteries to burst or liquid leakage.
When the battery replacement alarm melody is heard, replace all existing batteries with new ones.
Depending on the wireless communication environment, battery consumption may increase.
Interference in wireless communication may occur when this product is used, or radio interference may occur from other devices.
As this radio system may have radio interference during the operation, it cannot provide a service for human lives.
Excessive dew condensation may adversely affect the performance of this product.

The customer’s improper installation may result in additional service costs. We highly recommend professional installation.
The information of this user manual may vary without any notices to improve the performance of this product.

Product Components

The product components may vary depending on the installation environment . Product-Components

User Manual, Emergency Key
‘AA’ Batteries (LR6)
Handle Shaft Spring
Handle Shaft, Installation Screws
Spacer
Installation Manual

Outer Body Parts

Inner Body Parts

Inner Body-parts

Mortise

Opening the Door from Outside (Password)

When purchased, the product is set to Multi-leveled Security Code Entry Mode initially. Please, refer to “Multi-leveled Security Code Entry Mode setting” for Common Mode setting.

Silent Mode
Before entering a password, press the button and enter the password, then both the sound of the key entering and the door opening will be suspended. It is a useful function if you do not want to disturb neighbors when you go in and out at night.

Multi-leveled Security Code Entry Mode
General Mode

A password must be entered after the light is on. If not, touch the [number pad] and re-enter the password.
To cancel the password entry, press the [ ] button and re-enter the password.
If the password is entered wrong 5 times in a row, a warning sound, “Bbri-bbri-bbri,” ill be generated 20 times, and the system will shut down for about 3 minutes. When malfunction happens, a “beep” will sound every 10 seconds, and the entry block mode will be turned off automatically after 3 minutes with the sound of “beep beep beep beep beep beep beep.”

Opening the Door from the Outside (Key tag, Mobile Key)

A locked door can be opened from outside by using a key tag or mobile key. Place the registered key tag or mobile key on the key tag sensor. Opening the
Door from Outside-3

Place the key tag or mobile key. The door will be opened after 1 second.

Opening the Door from the Inside

To prevent an intrusion, it is recommended to close the door while the Fixing button is not pressed.
When frequently going in and going out, press the Fixing button to conveniently open the door.

All registration and setting are activated only when the door is opened.(WiFi connection is activated only when the door is closed.)

Registration Mode

Setting Mode

Initialization Mode

WiFi Registration Mode

Number Pad Guide
The number pad of the door lock shows diverse settings.

Registration Mode

A user can change a password, or register and delete a key tag or delete all key tags.
In addition, a wireless connection can be registered as an option.
In the Registration mode, select a function. (For the details of each function, refer to page 7–11.)

[Register] Button
Open the battery cover and shortpress the [Register] button.
Existing Password Touch the existing password and the button.

Changing Password

A user can register a password (4–12 digits).
Only one password can be registered. The default password is “1234.”

Enter Registration Mode
Select the Registration mode. (Refer to the Registration mode.)
Select Password Change
Touch New Master Password Touch a new password and the [] button.
Check Changed Password
Touch the [Register] button, the new password, and the button, consecutively, and check if the Registration mode is accessed.

To prevent intrusions, it is recommended to make a password with 6 or more digits. (Each digit number ranges from 0 to 9.)
Manage your password with care to prevent unauthorized persons from gaining access.
A registered password cannot be deleted. Register a new password.
To make sure the password has been properly registered, check the new password and close the door.
If checking the new password fails, initialize the key information (see page 12) to initialize the password, and change the password again.

Adding / Deleting User Password / Deleting All User Passwords

A user can register a user password (4 to 12 digits).
Up to 100 user passwords can be registered. A user password registered can be deleted, or all user passwords can be deleted.

Adding Password

Adding Password 2

Adding Password 3

Continuously, a user password can be registered or deleted.
When a user enters a user password within 60 seconds after a new user password is registered or deleted, the registration or deletion continues to be performed.
To make sure the password has been properly registered or deleted, check the password and close the door.

Adding/Deleting a Key tag / Deleting All Key tags

Up to 100 key tags can be registered. A registered key tag can be deleted, or all key tags can be deleted (ISO 14443 Type A supportable).

Adding Password 4 Adding Password 5

A key tag can be registered or deleted continuously.
When a user connects a key tag within 60 seconds after a new key tag has been registered or deleted, registration or deletion can continue.
To make sure the password has been properly registered or deleted, check the password and close the door.
Only the key tags provided by Samsung SDS can be used.
Samsung SDS will not be responsible for any problems occurring from the use of authentication methods, other than the key tags it has provided.

Wireless Module Management (Optional)

You can purchase a wireless module sold by Samsung and mount it into the wireless module mounting part. However, even though you purchase a proper Samsung wireless module, it may not be used in a model that does not support the module. Thus, please, contact the customer center before purchasing a wireless module to inquire the wireless module type of your model.

Mount WiFi or Wireless Module
Enter Registration Mode
Select the Registration mode.
(Refer to the Registration mode on page 7.)
Select Wireless Connection Setting Wireless module connection/disconnection
Enter Connection/Disconnection Mode from Controller
The Connection/Disconnection mode is activated from the controller. (Refer to the user manual of the controller.)
Select Wireless Module Management
Wireless Module ConnectionThe wireless module is connected.

A wireless module not sold by Samsung cannot be arbitrarily connected and used.
When a wireless module is linked, up to 20 user passwords can be registered.

Register a WiFi

When connecting a WiFi, a user can use App based various user services through WiFi.
WiFi connection is activated only when the door is closed.
(WiFi band: 2.4 GHz)

App Installation and Use
Install the ‘Samsung Smart Lock’ app from Google Play/App Store.
(Chinese users can install the Android app from Baidu, Tencent, or Qihoo360.)
After becoming a member, a WiFi can be connected.
– For the information on the registration and the use method, refer to the guide provided from the app.

A WiFi/wireless module is mounted by default.
If a WiFi/wireless module is mounted again, refer to the installation method on page 11.

Initialization

All registered data are deleted.

Press and Hold the [Register] Button
While the door is opened, press the [Register] button for 5 seconds.[Initialize the linked information]
WiFi linkage: Initialize the mobile key and WiFi registration information.The master/user passwords and key tags information are maintained.
Enter Master Password
When the number pad is lighted, enter the master password and touch the [] button.

Automatic/Manual Locking Setting

The Automatic Locking mode activates the automatic locking function of the door when it is closed.

Open the battery cover of the inner body. Set the [Automatic/Manual Locking] toggle switch of the inner body to A (automatic) or M (manual) position.
The door is automatically locked 1 second after the door is closed.
If the batteries are completely discharged, the door may not be locked.
The door does not automatically lock when it is closed. It is locked when you press [In-Home Security] of the inner body or touch the [number pad] of the outer body.
Regardless of the automatic/manual locking setting, the door is automatically locked 7 seconds after the door is not opened after the door locking is not opened.

Volume Setting

The sound that is generated when the number buttons are touched, when the door is locked, or when the locked door is unlocked, can be set according to the user’s preference. The product is initially set to generate the operation sound of the door lock. (Level 1)

Open the battery cover of the inner body. Set the [Volume] switch to [0]~[2].
[0]: The sounds of door opening/closing and key touching are deactivated (except an alarm sound).
[1]~[2]: All sounds are activated, and the sounds get louder as the step becomes higher.

Alarm Sound Deactivation

Open the battery cover on the inner body and press the [Register] button, or open the battery cover and separate the batteries.
Authenticate a registered key tag or touch the password, and touch the [] button.

Intrusion Detection Function
This function generates an alarm sound when an attempt is made to forcefully open the door from the inside or the outside. (It is a basic function and cannot be set/deactivated by the user.)
If the door is forcefully opened while locked, the door opening sensor detects it and generates an alarm sound for 5 minutes.

Prank Prevention Function
This function generates an alarm sound and deactivates lock operation when the door lock is improperly handled from the outside.
If a key tag that is not registered is used or a wrong password is touched five times in a row to open the door, an alarm sound is generated, and the door lock is deactivated for 3 minutes.

High-Temperature Alarm Function
If the room temperature abnormally increases, the temperature sensor detects it and an alarm is generated. (It is a basic function and cannot be set/deactivated by the user.)
This high temperature alarm function is activated at about 60℃ ± 10℃, but the temperature may vary depending on the installation environments.
When a high temperature occurs, the temperature sensor detects it.
The LED of the [In-Home Security] button on the inner body flashes while the alarm sound is generated for 15 seconds. After the alarm sound stops, the door is automatically opened.
(If the room temperature decreases to below a certain temperature, the door lock is normally operated.)

Battery Replacement

Melody for Replacing Batteries is Generated
When the door is opened by touching a password or recognizing a key tag, if the battery replacement alarm melody is heard, the batteries should be replaced.
(If the battery replacement alarm melody sounds, the battery replacement LED is lighted on the number pad.)

Battery Replacement
When the battery replacement alarm melody is heard, immediately replace all batteries with new ones.

Emergency Battery Use

If batteries are not replaced after their replacement time comes, they will be completely discharged and the lock will not operate.
Open Door Using Emergency Battery

Purchase an emergency battery (9 V) at the nearest store.
For an emergency battery, use 6LF22 (9 V) Alkaline batteries.

Emergency

While connecting a 9-V battery to the external power (emergency battery) contact point on the outer body, place a recognized key tag or enter a password.

Emergency Key Use

An emergency battery key is used when the door lock does not work because the battery replacement time comes or a circuit is wrong.
The emergency keyhole is viewable from the emergency key insertion part at the lower part of the outer body. Inserting an emergency key and turning it left and right can clear the locked state.

If you lose an emergency key, it is recommended to replace the entire key cylinder body. (Replacing the entire key cylinder body is paid.)

Product Specifications

Item	Specifications
Voltage	Four AA Alkaline 1.5 V batteries (LR6) (DC 6 V)
Emergency Power Source	One 9 V battery (6LF22) (separately sold)
Operation Method	Electronic control method (password, key tag)
Weight	2.7 kg (including both inner and outer bodies)
Product Dimensions (including the handle)	Outer Body