PAL ELECTRONIC SYSTEM VD900-433 Smart Vehicle Detector Instruction Manual
- June 6, 2024
- PAL ELECTRONIC SYSTEM
Table of Contents
PAL ELECTRONIC SYSTEM VD900-433 Smart Vehicle Detector
INTRODUCTION
VD 900-433 series is a new wireless Vehicle Detector featuring compact
dimension, This innovative detector is Plug and play, all-in-one device that
operates at a frequency range of 433MHz and is an ideal solution for vehicle
detecting when depart a public or office parking.
It includes a web interfaces that makes it easy to install and use.
Technical Specifications
Operating Frequency| 433MHz ISM Band
Power Supply| Buttery DC 3.6 v
Dimensions| 215mm × 125mm
Applications
• Parking lot management.
• Vehicle access control
Before installation
- Remove 4 screws from bottom cover
- Open the bottom cover
- Connect the jumper to it’s place.
- Close back the cover but very important to place the seal back to its place.
Highlights
- Power provided by a buttery which will last for approximately 5 years (1000 entrances per day).
- Holds approximately 1000 kg weight
WARNING: Not To Be Used for Personnel Protection
Step 1: Place the Vehicle detector at the center of rote on clean surface
so vehicles will pass when it is beneath them
Step 2: To activate the detector, use the magnet provided along with the
detector. Put the magnet on the set-up point and wait for 3 beep sounds slowly
and a final long sound. After the long sound remove the magnet at least 1
meter from the detector. 
Step 3: Preparations: Add the new detector to Pal SG303 –**WR unit with RF
technology such: GA-WRL, GA-WR, GB-WR, GI-WR. Enter the detector/s
identification numbers.
PAL Electronics Systems, HaTa’asiya 25 st, Ra’anana, Israel 4365413, POB 2516 Tel:972-9-7920667, Website: www.pal-es.com, Email: [email protected]
References
- Home - Evans & Sutherland - A Cosm Company
- Access Control Systems | PAL electronics systems LTD | Ra'anana
- Access Control Systems | PAL electronics systems LTD | Ra'anana