Gleiphir HF1 Real Wireless Bluetooth Earphones User Guide
- June 6, 2024
- Gleiphir
Table of Contents
USER GUIDE
Real Wireless Bluetooth Earphones
• Unpack The Box
Earphones 1- Charging Bag 1
Charging Case *1
Type-c cable 1 User Guide 1
• Product Overview
-
LED
-
Multifunction Touch Keys
-
Mic
-
Left
-
Right
-
Charging Case
-
LED
• Pair With Your Phone
When used for the first time, take out both earphones from the charging case. then put them back into the charging case to activate. At this time, the light of the earphones turns white. When the earphone is taken out from the charging case again, both earphones will auto power on and pair with each other. When the indicator light on one side flashes fast for the white light and the light on the order side flashes slowly for the white light, the left and light earphones are matched successfully. Search “Gleiphir HF1” on mobile phone and you can connect with it.
Notes: If the earphone is not activated by normal charging, put the earphones back into the charging case and charge the case with type-c cable, the white light of the earphone will be on.
• Restore Factory Settings
-
Put the earphones back in the charging case and make them in the charging state. At this time, the white Iight will be on long
-
Take out the left earphone or the right earphone separately from the charging case.
When the white Iight is flashing, long press the function button 6s until the white light is off, and then put it back into the charging case. -
Take out the other earphone from the charging case and repeat the above operation.
-
Finally, take out both earphones at the same time and the white Iight flashes. When the white light of one earphone flashes quickly and the white tight of the other earphone flashes slowly, the left and right earphones are matches successfully. Search “Gleiphir HF1” on your mobile phone and click it to connect with your mobile phone.
• About Charging
Charge the charging case
Please charge the case via Type-c cable. The white light on the charging case
flashes as it charges. When the charging case being fully charged, the white
light of the charging case will be on long When the battery is low, the
charging case’s while light flashes.
Charge the earphones
Put the earphones into the charging case. When the earphones charging, the
white light of the earphone will go on long. When the earphone is fully
charged, its white light goes out.
• Touch Key Functions
Phone
Reject: Long cress left/right earphone for 2s.
Answer/Hang Up: Double-click the left/right earphone to answer the incoming
call and double-click left/right earphone again to end it.
Long press for 2s
Double-click
Music
Play/Pause: Double-click the right earphone.
Next: Press the right earphone for 2s
Previous: Press the left earphone for 2s.
Double-click Press for 2s Press for 2s
Voice Assistant
Touch left/right earphone three times.
Touch three times
• Product Parameters
Model
| Gleiphir HF1| Battery Type|
Li-ion
---|---|---|---
Operation range| 10m with no obstacle| Bluetooth Protocol| HFP/HSP/A2DP/AVRCP
Bluetooth Version| 5.1| Battery Capacity (earphones)| 3.7V/30mAh
Charging Time| Approx 2hr| Battery Capacity (charging case)| 3.7V/600mAh
Music Time| Approx 5hr
*The specifications are acquired from laboratory testes data
• Non-warranty Regulations
Thank you for choosing our products. In order to protect your rights and
interests, please read the following carefully after purchasing the machine:
(The following conditions are not covered by tree maintenance.
- Product failure of damage caused by failure to use, maintain or storage in accordance with the operating instructions.
- Alter or tear the product package and bar code without authorization.
- The warranty period has been exceeded.
- Product damage caused by accidental factors or personal behave or, such as unqualified input voltage, high temperature, mechanical damage, serious oxidation or rust of product, etc.
- Failure or damage caused by force majeures such as earthquake, flood, fire, lighting strike, etc.
• Tips
- Please read the manual carefully before using the earphones.
- The earphones must be fully charged prior to the first use
- If the earphone is left unused for over 30 days, please charge it periodically.
- Please use chargers made by qualified manufacturer.
- If the Bluetooth earphones cannot be found by your phone, please check whether it is in pairing mode. The earphones will exit paring mode if left unconnected for a Long while.
Please reboot it when a program error of your phone occurs. Please recoclo reset it when a program error of the earphones occurs.
• Warning
- Do not use it at high volume far a longtime, so as not to damage your hearing.
- Never disassemble or modify your earphones for any reason to avoid any damage and danger.
- Do not store the earphones at extreme temperature.
- Keep the indicator light away from the eyes of children or animals.
- Avoid using earphones during thunderstorms to avoid confusion function of earphones and increased risk of electric shock.
- Do not use intent chemicals or strong detergents to clean the earphones.
- Keep the earphones and charging case dry.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Product warranty card
Warranty Description Within 12 months from the date of purchase, if a performance fault that’s not caused by human damage occurs on the product, you could enjoy the free maintenance services.
| Name of product: | Model type: |
|---|---|
| Date purchased: | Customer name: |
Contact information
Product maintenance record
| Date | Undesirable phenomenon | Solution |
|---|---|---|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>