QUINN 57460 6-Inch Digital Caliper Owner’s Manual
- June 6, 2024
- QUINN
Table of Contents
**QUINN 57460 6-Inch Digital Caliper Owner’s Manual
**
Specifications
Display Units
| Inches & Millimeters
---|---
Accuracy
| ±0.001″ (0.02mm)
Display|
0.0005″ (0.01mm)
Power Supply|
CR2032 Button Battery (Included)
IMPORTANT SAFETY INFORMATION
- Keep out of your child’s reach. Discard button batteries carefully. Do not allow children to play with devices that contain button batteries. This product is not a toy.
- Wear ANSI-approved safety goggles during use.
- Keep work area clean and well lit.
- Do not operate when tired or when under the influence of alcohol, drugs or medication.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
- Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Components and Controls
Operation Instructions
**** Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before use of this product.
-
Push the OFF ON button to turn caliper on.
-
To toggle measurement between inches and millimeters, press in/mm button.
-
With jaws closed, press ZERO to set readout to 0.00.
-
To measure outside of object, set the bottom prongs outside object being measured. Slide the jaws together until they gently contact the item.
Figure A: Outer Measurement -
To measure inside of object, set the top prongs inside object being measured. Spread prongs apart until they touch surface of object.
Figure B: Inner Measurement -
To measure an object’s step, place the sliding jaw on the upper step of the workpiece, then spread the prongs apart until the fixed jaw contacts the lower step.
**Figure C: Step Measurement
** Note: Use the ORIGIN button to set the Caliper to its absolute origin. Press and hold button for 1.5 seconds until readout shows 0.00.
- When finished, press OFF ON button to turn off Caliper.
- To replace battery, open battery compartment to right of display, install new CR2032 battery positive (flat) side up, and slide Battery Cover back into place.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Replacement parts are not available.
Reference UPC 193175412133
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser
that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or
for incidental, contingent, special or consequential damages arising from the
use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may
not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the
product at our election or we may elect to refund the purchase price if we
cannot readily and quickly provide you with a replacement. We will return
repaired products at our expense, but if we determine there is no defect, or
that the defect resulted from causes not within the scope of our warranty,
then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
Contact Us
Visit our website at: http://www.harborfreight.com
Email our technical support at:
[email protected]
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
WARNING
Read this material before using this product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.
For technical questions, please call 1-888-866-5797.