smort mimic Finestra MineriM Helium Crypto Miner Hotspot User Manual

June 6, 2024
smort mimic

smort mimic- LOGO

FinestraMiner™
User Manual v2.10

Introduction

Smart Mimic, in partnership with Sagem Teknoloji, is introducing the FinestraMiner, a best-in-class performance, and highly secure gateway with a heartwarming design that conceals sophisticated engineering. Secure the tamper-resistant electronics with high-performance placement options.

The FinestraMiner comes with onboard mining, compliant with the current Helium network specifications, it is ready to install and use with the Helium App.

Before You Install
Note: Please visit inestra.com/insta II to get the latest installation instructions. Please refer to the included Quick Start Guide to set your device up faster.

Preparing Your FinestraMiner

  1. Download the Helium App. Search “Helium Hotspot’ in the Apple Store and Google Play.
  2. IMPORTANT: While signing into the Helium App, please make sure to note down the 12 keywords provided by the Helium App. We would highly recommend that you use the keywords notecard and pen we have sent in the box.
  3. Open the package and make sure all items are in the box. (See above: What’s in the Box.)
  4. Screw the provided antenna onto the antenna jack located on the Finestra Miner.
  5. Do not power your FinestraMiner up before placing it in the preferred location.

What’s In The Box
1x FinestraMiner
1x Power Adaptor
1x Antenna (915 Mhz)
1x Power Cable Extender
3 x Wallet Security Keywords Cards
1x Pen

Dimensions: 43 x 43 x 1.6 in (110 mm x 110 mm x 40 mm)
Weight: 10.5 Oz. 13009)
Supply Voltage: SV / 2A
Processor: Raspberry Pi 4 / 4GB
Device Connectivity: BLE S and WiFI 5GHz
Working Temperature: -31°F to 167°F 1-35’C to 75°C)
Frequency Support: PU864. 1N865, U5915 AU915. K14920. AS923
Antenna Gain: 2.6 dBi

Locating Your FinestraMiner

  1. Preferably place your FinestraMiner near a window with minimal external obstructions.
  2. If you prefer you can attach your FinestraMiner directly to a sturdy window glass pane with the reusable micro-suction base.
  3. To activate the micro-suction, examine your FinestraMiner base and carefully remove the protective plastic film on your micro-suction surface with a pair of tweezers.
  4. To remove and move FinestraMiner just grasp the edges firmly. Pull and twist it to lift the edge from the surface. Lift to remove.
  5. You can wipe the dust away from the micro-suction to refresh the adhesive property of the surface.
  6. For a better performance do not place the FinestraMiner near metal meshes, screens, or other large metallic objects. Place away from other electronic devices.

Powering Up Your FinestraMiner

  1. Power up FinestraMiner using the included power supply.
  2. WARNING: Do not unplug the FinestraMiner during the set-up process.
  3. Press the “+” button in the Helium App to add your gateway and follow the in-app instructions.

Troubleshooting

  1. Make sure Bluetooth is on and the phone is connected to the Internet while setting up FinestraMiner.
  2. Make sure that the Helium App has Location permissions enabled. These can be found under App Info > Permissions > Location
  3. Make sure you have downloaded the latest version of the Helium App from the store.

Limited Warranty
Smart Mimic provides a limited warranty for FinestraMiner please visit: www.thefenestra.comMarranty.

Use and Care
FinestraMiner is not water-resistant. Please use FinestraMiner only for indoor and avoid direct contact with water. FinestraMiner works best between -31° F and 167 °F (-35° C and 75° C).

FCC Compliance Statement

Contains FCC ID: 2ABCB-RPI4B
Contains FCC ID: Z4T-WM1302-C
CAUTION: The manufacturer is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Supplier’s Declaration of Conformity 47 CFP § 2.1077 Compliance

Information

Product Name: FinestraMiner
Product Model: FN280417
Manufacturer: Smart
Mimic 620 Iris
Ave. #432 Sunnyvale, CA, 94086
finestrasupport@smartmimic.com www.thefinestra.com
Modular Components Used:
NAME: Raspberry Pi 4
Model B MODEL: Raspberry Pi 4 Model B
FCC ID: 2ABCB-RPI4B
NAME: WM1302 LoRaWAN Gateway Module(SPI) – US91S
MODEL: WM1302-SPI-U5915
FCC ID: Z4T-WM1302-C
NAME: WM1302 LoRaWAN Gateway
Module(SPI): -US915
MODEL: WM1302-SPI-US91S,WM1302-SPI-US91S-C
FCC ID: Z4T-WM1302-C
NAME: Raspberry Pi 4 Model B
MODEL: Raspberry Pi 4
Model B FCC ID: 2ABCB-RPI4B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired innovation

Support thefinestra.com/support
Smart Mimic, FinestraMiner, and the logos are the trademarks of Smart Mimic, Inc. Helium and the Helium logo are the trademarks of Helium, Inc. Apple and the Apple logo are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.
Copyright© 2021 Smart Mimic, Inc. All rights reserved.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

httpsfismartmimic.comkalifornia-prop-65/
SM-HW-BP-FN-02 Layout
Version: 2.10

Documents / Resources

| smort mimic Finestra MineriM Helium Crypto Miner Hotspot [pdf] User Manual
Finestra MineriM Helium Crypto Miner Hotspot
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals