BZBGEAR Pro Camera Control Keyboard BG-CJ-IPRSPRO User Manual

BG-CJ-IPRSPRO
Pro Camera Control Keyboard

User Manual

Specification & Parameters

Communication Interface

R5422/RS485 Interface| 4Pin Terminal
RS232C Interface| DB 9Pin Male Interface
LAN Interface (All of Communication Port can work at the same time )| RJ45 Female Interface
Power Interface| JEITA type4 Female
Upgrade Interface| Micro USB Female Interface
Camera Control
Max Support| 255pcs PTZ Camera
Control Protocol| VISCA, PELCO P/D
Display Screen| OLED Screen
Camera Channel| 7
Knobs| 3
Joystick| 1
Control Signal Format
Baud Rate|  2400bps, 4800bps, 9600bps, 19200bps, 38400bps
Data Bit| 8bits
Stop Bit| lit
Parity Bit| NONE
Ethernet Protocol| UDP / TCP /IP
Power
Rated Voltage| DC 12V
Rated Current| 0.3A max, 3.6W
Power Consumption| 24W
Physical
Working Temperature| Oct — 40t ( 32 °I’ — 104 °I: )
Storage Temperature| -20″C —+6012 ( -4 °I: — 140 °I: )
Working temperature| Indoor
Dimension Size (LWH )| 350mm x 173mm x 99mm
G.W (kg)| 2. Skaggs
Packing Accessories| User Manual / 2Pin Terminal / Power Adapter

Keys Function Description

VALUE/R-Knob
For adjusting tingcamera’s Exposure parameters or Red Gain Value. Clockwise to increase, counterclockwise to decrease.
BRIGHT/B- Knob
To adjust the camera’s exposure parameters or Blue Gain Value. Clockwise to increase, counterclockwise to decrease.
FOCUS Kno
To adjust the camera’s focal length. Clockwise to focus far, counterclockwise to focus near.
Note: When using this function, the keyboard’s Focus Mode will change to

FOCUS Function Area
『AUTO MANUAL』Adjust camera’s Focus Mode. When AUTO India tonight is ON, then the current mode is AUTO MODE.
『ONE PUSH AF』Triggers one- Auto FOCUS. Each time it is pressed, the camera focuses once. The camera will enter AUTO FOCUS mode.

WB Mode Key
Modify white balance mode. Pressing will change between auto and manual modes. Use the VALUE/R-Knob and BRIGHT/B-Knob to change value settings. When the WB AUTO light indicator is on, the R- and B-Knobs will only operate in this mode. Please see Table 1 for reference.

AE Mode Key
Modify Auto Exposure mode. Pressing will change between modes. Use the VALUE/R-Knob and BRIGHT/B-Knob to change value settings. When the AE AUTO light indicator is on, the VALUE- and bright-Knobs will only operate in this mode. Please see Table 2 for reference.

Exposure Mode

| VALUE-Knobs Function|

BRIGHT-Knobs Function

---|---|---
AUTO| None| Gain Compensation
MANUAL| Shutter| IRIS
Shutter Priority| Shutter| Gain Compensation
Iris Priority| IRIS| Gain Compensation
Brightness Priority| None| Brightness

PRESETS Function Area

『PRESET』Keys are used to Save and Call Presets.
Save Presets: Press 『PRESET』Bu on, the light of 『PRESET』button keys start blinking. Next press the number of Preset position you want to save (e.g., 『PRESET』+
tio + +『1』『2』『0』to save Preset 120).
Call Presets:
Preset Number Keys +『PRESET』(e.g., Press『1』+『2』+『0』, then press 『PRESET』, to call Preset 120).
Clear Presets: then press 『PRESET』, to call Preset 120).Press 『RESET』bu on; the light of 『RESET』keys will blink.
Next press the number of the saved preset button position you want to clear (e.g., Press『RESET』+『1』+『2』+『0』to clear Preset 120).

**Camera function Area

**

****『POWER』 key is to check the power status of all camera channels.
Press the keys and the indicator light turns on.『 CAM1』~『CAM7』

Green means the camera is powered on. White means the camera is in standby mode. No light means the camera is not connected.
Pressing 『POWER』+『CAM1』~『CAM7』will to turn on/off the corresponding camera.

[BACK LIGHT  BACK LIGHTTurn ON/OFF Backlight
[MENU)  MENU Open or close keyboard menu; long press
[MENU J enter to Keyboard menu setting;
[PAN TILT RESET) PAN TILT RESET CONE PUSH AWAY PO; TILT Reset the Pan/Tilt position of the camera
[ONE PUSH AWB』ONE PUSH AWB Trigger one-time white balance.
Each time you press, the camera will calibrate the White balance one time. The camera will enter to Single time White balance Mode.
[WDR OFF/-WDR OFF Turn OFF WDR Function or Reduced Dynamic
Grade (Only available for Multigrade WDR Camera )
[WDR ON/+WDR ON Turn on WDR Function or Increased Dynamic Grade (Only available for Multigrade WDR Camera )
[COLOR GAIN+J Increase the value of COLOR GAIN
[COLOR GAIN-1 Reduce the value of COLOR GAIN
[COLOR HUE+J Increase the value of COLOR HUE
[COLOR HUE-J Reduce the value of COLOR HUE

3-Axis Joystick
The joys can support up/down, left, and clockwise/ tick sectional ft/rig counterclockwise dir rota It can move the camera up/down, on.left/right and zoom n/out. Clockwise rotate to zoom in (TELE), counterclockwise rotate to zoom out (WIDE). When inside thetiontick Keyboard menu, the joys can be used to modify the parameters.

**Channel short Keys Area

**

[CAM1J — rCAM7J is the short key to switch the channel of the camera. When you press the camera selection, the indicator light turns green. Now all the keyboard display information is from that camera. All of the camera channels can work with a different communication protocols and COMM parameters.

Display Screen

Displays current rea I-time Keyboard status information (including IP Address, Port Number, COMM ID, Communication Protocol, Baud Rate, etc.) and Keyboard Menu. The display screen brightness can be set in the keyboard Menu.

Light Sensor

Detects the current environmental brightness. When the keyboard backlight setting is set to AUTO, the backlight will adjust according to the environment’s light level.

Interface Function & Connection Diagram

Upgrade Interface (For factory use only)
Use for upgrading t h e hardware of the control keyboard. Using a micro USB cable, connect to a PC and you can upgrade via our upgrade software.
RS422/RS485 Interface
Use for connecting Camera through RS422 or RS485. Please see the connection diagram for reference:

Keyboard Camera RS 422interface
T+  R+
T-R-
T—R-
R+ T-
T+ RS485 A+
T—  RS485 B—

RS232 Interface
Use for connecting Camera through RS232. Please see the connection diagram for reference:

LAN Port

You can use a network cable connection with a Camera or through Network Switch or Router. reference. Please see the connection diagram for 4%

12V Power Interface This interface is the Power supply interface. You can directly connect it with its Power adapter; please use only the original power adapter.

Keyboard Menu Operation

• Long Press r MENU I for 3 secs: enter Keyboard Menu
• Swinging joystick Left & right: control the cursor up/down moving or change current menu parameter
• Joystick towards the right: enter the current menu; save & exit Current Menu
• Joystick towards left: exit current menu; will not save current menu
• Press r MENU]: exit current menu; will not save current menu
• Press Number keys OJ rgi: input number value ( only valid for menu items that require input number )
• Press [PRESET]: Backspace/Return to previous input number value ( only valid for menu items that require input number )
• Press [RESET) : To confirm the current input value; enter to next input item ( only valid for menu items that require input number )
➢Main Menu
1. Long press [MENU] for 3 secs to enter Main Menu
2. Move Joystick Up-Down to control Cursor up-down
1. System Setting
2. Com Setting
3. Ethernet Setting
4. Password Setting
4. Password Setting
System Setting
» Move Cursor to 【System Setting】, then move Joys towards the right to enter.
【Language】
1. Language： English
2. LED Brightness： Normal
3. Backlight： Mid
4. Joystick Sensitivity: Normal ↓↓↓↓
Move the cursor to 【Language】, Joys toward-right to enter language tick status. thing own to change the move Joystick up/d parameters. To save and exit, move Joys
towards right.
Optional: Chinese/ English; other languages can be customized.
【LED Screen Brightness】
• Setting LED Screen Brightness: Low, Normal, High 【Button Back Light】
• Setting the brightness of bu on backlight: OFF, LOW, MID, HIGH, AUTO
When “AUTO” is selected, the backlight adjusts according to environmental brightness (e.g., during day time, b a c k l I g h t w I l l be off; during nighttime, the backlight will turn on).
【Joystick Sensitivity】
• Set Joystick sensitivity: Low, Normal, High. The joystick degree of movement to control the pan/tilt speed. When the sensitivity is set. t high, the pan/tilt will move fast with  Only small degrees of movement from the joystick
【AUTO STANDBY】
• Allows keyboard to e n t e r standby mode after a set time of inactivity. Auto standby options (in minutes):1, 2, 5, 10, 20, 30, 6O
5. Auto Standby ON ↑↑↑↑
6. Itself IP：192.168.1.88:5000
7. About Keyboard

【 Keyboard IP】
To set keyboard’s IP Address and Port Number. Default IP: 192.168.1.88; default Port: 5000
• 【About Keyboard】 To check the keyboard information, including Keyboard Model No, Version, Serial Number.
Noted：【↓↓↓↓】indicates the menu can page down，【↑↑↑↑】 indicates the menu can page up
COM Setting
Move the cursor to 【COMM SETTING】, Joystick toward Right to enter；
【CHANNEL】
To select Channel CAM1 ~ CAM 7. Corresponding keyboard Keys 『CAM1』 』~『CAM7
【 ID】
• Set communication address according to corresponding camera channel.
When using VISCA, only addresses 1-7 are available. If using PELCO P/D, the address can be set to 1-7 or “Others” for addresses above 7.
Setting addresses above 7:
Select the channel key you’d like to use (e.g., CAM1). Set the ID to Others, then exit the menu. Select the corresponding numbers for the address you’d like to set (e.g., 12), then press the channel key.
Example using CAM1:
Press CAM1, then set the address to Others. Exit the menu, then press [1] + [2] + [CAM1]. The address for CAM1 will now be “12.”
【Baud Rate】
For setting Baud Rate: 2400, 4800, 9600, 19200, 38400
【PROTOCOL】
• For setting PROTOCOL: VISCA, Pelco-D, Pelco-P
ETHERNET SETTING
Move Cursor to【Network Se 】, then Joystick towards the right to enter.
【CHANNEL】
To select the corresponding Channel 『CAM1』~『CAM7』
1. Channel1：CAM1
2. Cam IP：192.168.1.160
3. Port：8090

【IP Address】
• Setting the corresponding channel of Cam IP Address. It can by be inputted Digital Bu ons. When the number is input to 3 bits, the cursor will Auto enter the next item. When the input number is less than 3 bits, Press『RESET』to confirm and enter the next items. If you input the wrong number, press 『PRESET』 to backspace.
【PORT】
• Setting UDP Communion PORT OF Corresponding Channel Camera.
Passwords Setting
Moving Cursor to 【Password Se 】, then Joystick towards the right to enter.
【Password Enable】
• Seether to use the Passwords function: Disable/ Enable.
Default password: 8888
1. Password Enable： Disable / Enable
2. Modify Password

【Modify Password】
• Allows changing the password.
Default password: 8888

Dimensions Size (Unit: mm)

Warranty

BZBGEAR wants to assure you peace of mind. All BZBGEAR cameras and camera- related products include our Stress-Free Three Year Warranty.
For complete warranty information, please visit BZBGEAR.com/warranty.
For questions, please call 1.888.499.9906 or email support@bzbgear.com.

Mission Statement
BZBGEAR manifests from the competitive nature of the audiovisual industry to innovate while keeping the customer in mind. AV solutions can cost a pretty penny, and new technology only adds to it. We believe everyone deserves to see, hear, and feel the advancements made in today’s AV world without having to break the bank. BZBGEAR is the
solution for small to medium-sized applications requiring the latest professional products in AV.
We live in a DIY era where resources are abundant on the internet. With that in mind, our team offers system design consultation and expert tech support seven days a week for the products in our BZBGEAR catalog. You’ll notice comparably lower prices with BZBGEAR solutions, but the quality of the products is on par with the top brands in the industry. The unparalleled support from our team is our way of showing we care for every one of our customers. Whether you’re an integrator, home theater enthusiast, or a
do-it-yourselfer, BZBGEAR offers the solutions to allow you to focus on your project and not your budget

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>