WYUR NPE110 Wireless Fitness Sensor User Guide

October 27, 2023
WYUR

WYUR-NPE110-Wireless-Fitness-Sensor-LOGO

WYUR NPE110 Wireless Fitness Sensor

WYUR-NPE110-Wireless-Fitness-Sensor-PRODUCT

WYÛR, pronounced “wire”, is designed to allow cyclists, triathletes, and fitness enthusiast a simple means to connect fitness sensors to mobile devices, cycling computers, fitness equipment, and wearables used while exercising.WYUR-NPE110-Wireless-Fitness-Sensor-FIG-1

BATTERY CHANGE

WYUR-NPE110-Wireless-Fitness-Sensor-FIG-2

GETTING STARTED

  1. Download the Configurez app from the iOS App Store or Google Play store.

  2. WYÛR is shipped in a deep sleep state. To wake WYÛR place it on the back of your NFC capable phone and move it until WYÛR wakes as indicated by the beep and double LED flash. For a full listing of the LED functions, please visit the support section at www.npe.fit.
    NOTE: If you have trouble waking the device with NFC, open WYÛR by removing the cover, and then re-install the cover. This performs a battery reset and wakes WYÛR.

  3. Once awake, pair WYÛR to the Configurez app for setup and configuration.

  4. Once paired, allow all permissions from WYÛR in your phone’s settings.

  5. WYÛR comes with mounting accessories including shoe clip, wheel/stem mount, VHB tape, and silicon hold-er. The following are examples some of the mounting options available for WYÛR.

For use as a cycling cadence sensor, WYÛR can be mounted by either the supplied VHB tape or silicon hold-er, as pictured below:

WYUR-NPE110-Wireless-Fitness-Sensor-FIG-4

For use as a cycling speed sensor, WYÛR can be mount-ed to either the front or rear hub as pictured below:

WYUR-NPE110-Wireless-Fitness-Sensor-FIG-5

For use as a footpod, WYÛR can be attached to your shoe with the supplied shoe clip, as pictured below:

WYUR-NPE110-Wireless-Fitness-Sensor-FIG-6

For other cycling applications, WYÛR can be attached to your bicycle stem as pictured below:

WYUR-NPE110-Wireless-Fitness-Sensor-FIG-7

Any Questions
Please contact us at support@npe-inc.com or visit our
Help Center: https://npe-inc.zendesk.com/hc/en-us.

Range of WYÛR

To ensure good connectivity between WYÛR, it should be within 10-20 feet of your sensors and mo-bile device, wearable, or cycling computer or fitness equipment.

IP RATING
WYÛR is water and dust proof to IEC Standard 60529 IPX7. It can be submersed in 1 meter of water for 30 minutes. Prolonged submersion can cause damage to WYÛR.
NOTE: If using WYÛR as a 5kHz transmitter, we recommend setting WYÛR on the fitness equipment console for best 5kHz transmission.

Battery Caution
This product contains a CR2032 coin cell battery. DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. If the battery is swallowed, it can cause severe inter- nal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think a battery might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Radio Frequency Approvals
The WYÛR product has received regulatory approv-als in the United States (FCC), Canada (IC), and European Union (CE). You must use WYÛR in accor-dance with all instructions provided by the North Pole Engineering, which includes installation and/or operating conditions necessary for compliance.

United States
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar- antee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help”

Europe
Hereby, North Pole Engineering declares that WYÛR is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at http://npe- inc.com/cableinfo/wp-content/up-loads/2017/11/EU-Declaration-of- Conformity.pdf Frequency range: 2402-2480MHZ Maximum output power: <1mW

Canada
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

  1. This device may not cause interference; and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.”

WARNING: This product can expose you to chemicals including bisphenol A (BPSA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings.ca.gov.

Radio Certification IDs:
FCCID: XRH-NPE110
IC: 11922A-NPE110

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals