BZBGEAR BG-EXH-70C HDMI Point to Point Extender User Manual

User Manual
HDMI EXTENDER
Point to Point Extender

BG-EXH-70C

Important Safety Notice

1. Do not mix up HDMI to RJ45 transmitter and RJ45 to HDMI receiver before installation.
2. Do not hot plug when it is working.
3. Use DCSV/2A power supply only. Make sure specification matched if using 3rd party adapters.
4. Static electricity will cause damage of the device, please do ESD protection when using the device.

Introduction

This H DMI Extender includes a transmitter unit and a receiver unit, allowing HDMI signal to be transmitted up to 70 meters at 4K resolution using a CAT6/6A/7 network cable. It is perfect for outdoor advertising, video clips, a monitor system, home entertainment, and conference, etc.

Features

1. Zero-latency.
2. 4K@60Hz HDMI signal can be transmitted 70 meters through a CAT6/6A/7 network cable.
3. The receiver can extract the digital audio from the transmitter through the S/PDIF port.
4. Supports audio formats (Dolby TrueHD 7.lCH/Dolby Digital 5.lCH).
5. Supports HDR(YUV4:4:4), EDID passback.
6. Transmitter support one HDMI loop-out.
7. Support bi-directional IR passback function (20 ~ 60KHz).
8. Lightning Protection, Surge Protection, ESD Protection.

Package Contents

|
---|---
Transmitter unit xlpc| Receiver unit xlpc
|
DC5V/2Ax2pcs| User manual xlpc
|
IR blaster extension cable xlpc| IR receiver extension cable xlpc
|
Mounting brackets x8pcs| Screw x18pcs

Installation Requirements

1. HDMI source device (compute graphics card, DVD, PS3, )HD monitoring equipment etc.
2. HDMI display device like SDTV, HDTV, projector with HDMI port.
3. UTP/STP CAT6/CAT6A/CAT7 cable. Follow standard IEEE-568B, It is recommended to select a network cable with less loss and crosstalk.

Interfaces

Transmitter (TX)

1

| Reset button| Press to restart the device
---|---|---

2

| RJ45 signal output| Connect with network cable mo

3

| Power/Signal indicator| When there is power and no HDMI signal, the indicator will flash, when there is an HDMI signal, the  indicator will light solid blue

4

| DCSV input| Connect with DCSV/2A power adapter

5

| HDMI output| Connect with HDMI display device

6

| HDMI input| Connect with the source device

7

| IR in| Connect with IR receiver extension cable, please make sure the remote control used is within the effective range

8

| IR out| Connect with IR blaster extension cable, please get closer to the source device while using

Receiver (RX)

fiber-optic interface
3| RJ45 signal input| Connect with a network cable
4| Power/Signal
indicator| When there is power and no HDMI signal, the indicator will flash when there is an HDMI signal, the  indicator will light solid blue
5| DC5V input| Connect with DC5V/2A power adapter
6| S/PDIF out| Output digital audio signal.
7| HDMI output| Connect with HDMI display device
8| IR in| Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
9| IR out| Connect with IR blaster extension cable, please get closer to the source device while using

Installation Procedures

1. Connection
   one to one:
   Following the standard of IEEE-568B, It is recommended to select a network cable with less loss and crosstalk.1-Orange/white| 2-Orange| 3-Green/white
   ---|---|---
   4-Blue| 5-Blue/white| 6-Green
   7-Brown/white| 8-Brown|

2. Connection instruction
   1. Connect the source device to the HDMI In the port of the transmitter with an HDMI cable, and connect the HDMI out port of the receiver to the display device with another HDMI cable.
   2. Connect the CAT out port of the transmitter and the CAT in the port of the receiver via a network cable (CAT6/CAT6A/CAT7).
   3. If using an HDMI loop out, connect the display device to the HDMI OUT port of the transmitter.
   4. Plug the power supply into the device to get started.
   [NOTE]: It is recommended to use a length range within 270m network cable. If the cable is too short, there may be no display output because the signal is too strong. If the cable is too long, the output may be of poor quality.

3. IR User Guide
   1. IR blaster extension cable should plug in the IR OUT port of the transmitter and receiver, IR receiver extension cable should plug in the IR IN port of the transmitter and receiver.
   2. The emitter of the IR blaster extension cable should be as close as possible to the IR receiving window of the source device.
   3. Face the receiving head of the IR receiver extension cable to the user for convenient remote control.
   

FAQ

Q: There is no output on screen when all connections are correct?
A: 1) Please make sure the H DMI cables supports 4Kx2K if the output signal from the source device is 4Kx2K resolution.
2) Please check and make sure the network cable inserted into the RJ45 port is well.
3) Restart the transmitter or receiver by pressing the reset button.

Q: Black screen happened on the display/monitor?
A: 1) Check if the length of the cable is within the specified range.
2) Reset the transmitter to re-built the connection.

Q: The display shows unusual color or no sound?
A: 1) Reset the transmitter or receiver to re-built the connection.
2) Check if the HDMI cables are connected well.
3) Reconnect the network cable.

1080i@50/60Hz, 1080p@50/60Hz, 3840×2160@24/25/30/50/60Hz 4096×2160@24/25Hz, 1280×960, 1280×800, 1280×768, 1680×1050, 1360×768, 1366×768, 1600×900, 1024×768, 800×600
HDMI Performance And Interface| Supports audio formats| LPCM/DTS-HD/DTS- Audio/Dolby TrueHD 7.1CH/ Dolby Digital 5.1CH
Input and output TMDS signal| 0.7-1.2Vp-p(TMDS)
Input and output DDC signal| 5Vp-p(TTL)
Input cable length| .8m(AWG24)
Output cable length| 8m(AWG24)
Transmission Distance| CAT6/6A/7| 70m
Protection Level| Electrostatic protection of the whole machine| la Contact discharge level 3
lb Air discharge level 3 Implementation of the standard: IEC61000-4-2
Operating Environment| Working temperature| -20-60°C
Storage temperature| -30-70°C
Humidity (no condensation)| 0 — 90%RH
Body Properties| Dimension| 106.0(L) x 99.0(W) x 26.2(H)mm
Material| Aluminum alloy material + crystal panel
Treatment process| Grit blast
Color| Black
Weight| TX: 210g RX:210g

WARRANTY

BZBGEAR wants to assure you peace of mind. We’re so confident in the quality of our products that along with the manufacturer’s one-year limited warranty, we are offering free second-year warranty coverage upon registration.
Taking advantage of this program is simple, just follow the steps below.

1. Register your product within 90 days of purchase by visiting BZBGEAR.com/warranty.
2. Complete the registration form. Provide all necessary proof of purchase details, including serial number and a copy of your sales receipt.

For questions, please call 1.888.499.9906 or email support@bzbgear.com.
For complete warranty information, please visit BZBGEAR.com/warranty or scan the QR code below.

http://l.ead.me/bb5EEJ
Terms and conditions apply. Registration is required.

MISSION STATEMENT

BZ8GEAR manifests from the competitive nature of the audiovisual industry to innovate while keeping the customer in mind. AV solutions can cost a pretty penny, and new technology only adds to it. We believe everyone deserves to see, hear, and feel the advancements made in today’s AV world without having to break the bank. BZBGEAR is the solution for small to medium-sized applications requiring the latest professional products in AV.

We live in a DIY era where resources are abundant on the internet. With that in mind, our team offers system design consultation and expert tech support seven days a week for the products in our BZBGEAR catalog. You’ II notice comparably lower prices with BZBGEAR solutions, but the quality of the products is on par with the top brands in the industry. The unparalleled support from our team is our way of showing we care for every one of our customers. Whether you’re an integrator, home theater enthusiast or a  do-it- yourselfer, BZBGEAR offers the solutions to allow you to focus on your project and not your budget.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>