OCEAN MATRIX 4K HDMI Extender OMX-01HMET0003 User Guide

: June 6, 2024
: OCEAN MATRIX

Table of Contents

Specifications
LED Indicators
IR Blaster & IR Extender
Troubleshooting
SAFETY PRECAUTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INSTALLATION & SPECIFICATIONS
OMX-01HMET0003
4K HDMI Extender

Specifications

Compliance| HDMI 2.0 / HDCP 2.22 / HDCP 1.4
Certification| CE, RoHS
Video Bandwidth| 18Gbps
Video Resolutions| Up to 4K60Hz 4:4:4
Color Space| RGB / YCbCr 4:4:4, YCbCr 4:2:2/4:2:0,YUV 4:4:4
Color Depth| 8/10/12-bit (1080P60Hz, 4K30Hz, 4K60HzYCbCr 4:2:2/4:2:0) 8-bit (4K60Hz 4:4:4 ) Ocean Matrix
812 Kings Highway

Specifications

HDMI Audio Formats

| LPCM 2.0/2.1/5.1/6.1/7.1

Dolby Digital, Dolby TrueHD, Dolby Digital Plus DTS-ES, DTS HD Master, DTS HD- HRA, DTS-X

Power Consumption| 3.84W
Dimensions| 2.36 x 3.50 x 0.71 in
Weight| TX 5.64oz, RX 5.47oz
Includes| (1) 12V/1A Power Supply, (1) IR Blaster, (1) IR Receiver

LED Indicators

Green LED illuminates when the transmitter or the receiver is ON.
Orange LED illuminates when the transmitter and receiver are transmitting signals.

IR Blaster & IR Extender

Troubleshooting

No image output

Ensure the power supply is firmly connected. Only use the 5VDC power adapter included with the unit.
Check that the cables are securely connected.
Check that the display/TV has been set to the proper input.
For PC connections via HDMI, set output mode to mirror or extend in display settings.

Display is unstable

Check all connections.
Connect the source directly to the display device to ensure there is a signal output.
Change the signal source if necessary.
Use only high-quality copper standardized CAT6 cable.

|

SAFETY PRECAUTIONS

|
---|---|---

To prevent fire or shock hazards, do not expose this equipment to high humidity and/or dust. Do not use in an unprotected outdoor installation nor any area classified as overly damp or wet.
The temperature for installation should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct sunlight exposure or extreme changes of temperature over a short period of time.
Do not disassemble the unit or place it on an unstable base.
Do not drop the unit and avoid heavy impact.
This unit should not be permanently installed unless proper ventilation is provided. Any enclosure openings must not be blocked or covered as they protect the unit from
overheating.
Before cleaning, turn off the power and unplug the unit from all connections. Use a damp cloth. Do not use liquid cleaners or aerosol cleaners.
Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
Do not attempt to open or service this unit yourself as opening or removing covers may expose you to dangerous voltage and other hazards.
There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized dealer, or an authorized repair service company.