NORDIC Games 7402157A Basketball Basic Stand Owner’s Manual
- October 27, 2023
- NORDIC Games
Table of Contents
Basketball Basic
Manual
Art. no. 809-002 5705858717746
Imported by NSH NORDIC A/S
Virkefeltet 4 8740 Braedstrup Denmark
Made in PRC
7402157A Basketball Basic Stand
WARNING!
PLEASE READ THESE INSTRUCT/ONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
Warning. Not suitable for children under three years. Small Parts. Long Net.
Strangulation Hazard. Failure to follow these safety instructions may result
in serious injury or property damage and will void the warranty. A responsible
adult must supervise and ensure thai all players know and follow these rules
for sale operation of the produet. Pass these instructions onto any future
owners of this produet. To ensure safety, do not attempt to assemble this
produet without foliowing the instructions carefully. Check the entire box and
inside all packing material for parts and/or additional instruction material.
Before beginning assembly, read the instructions and identify parts using the
hardware identifier and parts list in this manual. Proper and complete
assembly, use, and supervision are essential for proper operation and to
reduce the risk of accident or injury. A high probability of serious injury
exists if this produet is not installed, maintained, and operated properly.
Children should be supervised at all times to ensure they do not climb, mount,
sit, lean upon, adjust, move or misuse the stand in any way. Failure to follow
this warning poses a risk of serious injury or property damage.
Do not use this produet for commercial purposes.
This produet is designed for outdoor, domestic use only. lf using a lodder
during assembly, use extreme caution. Pay attention to all instructions and
guidance provided with the lodder. Check the base for leakage before each use.
Slow leaks could cause the produet to tip over unexpectedly. Check all parts
for wear or damage before each use.
Do not use if any parts appear broken or damaged.
Do not use any other fixings or attachments not provided with the set. These
may not offer the same strength or stability and con lead to accident or
injury occurring.
Seat the pole sections properly and ensure all parts are securely tightened.
Failure to do so could allow the pole sections to separate during play and/or
during transport of the produet. Climate, corrosion or misuse could result in
produet failure. lf technical assistance is required, contact customer
service.
Most injuries are caused by misuse and/or not foliowing instructions. Use
caution when using this unit.
Do not hang on the rim or any part of the produet including backboard, support
braces or net. During play, especially when performing dunk type activities,
keep player’s face away from the backboard, rim and net. Serious injury could
occur if teeth/face come in contact with backboard, rim or net.
Do not slide, climb, shake or play on base and/or pole. Alter assembly of the
base is complete, fill produet completely with water or sand. Never leave
produet in an upright position without filling base with weight, as produet
may tip over causing injuries.
When adjusting height or moving produet, keep hands and fingers away from
moving parts. Do not allow children to move or adjust produet.
During play, do not wear jewellery [rings, watches, necklaces, etc.).
Objects may entangle in net.
Only mount the produet on a dry, flat, even surface.
The surface beneath the base must be smooth and free of gravel or other sharp
objects.
Punctures cause leakage and could cause produet to tip over. Keep organic
material away from pole base.
Grass, litter, etc. could cause corrosion and/or deterioration. Check pole
produet for signs of corrosion [rust, pitting, chipping) and repaint with
exterior enamel point. lf rust has penetrated through the steel anywhere,
replace the pole immediately.
Do not use produet during windy and/or severe weather conditions; produet may
tip over.
Place produet in the storage position and/or in an area protected from the
wind and free from personal property and/or overhead wires.
When moving produet, use caution to keep mechanism from shilling.
Do not allow water in tank to freeze. Empty the tank completely before
storage. While moving produet, do not allow anyone to stand or sit on base or
have added ballasting on base.
Do not leave produet unsupervised or play on produet when the produet is
moving. Use caution when moving produet across uneven surfaces. System may tip
over.
Never hang or swing from the produet. When positioning the produet, ensure
sufficient space for foreseeable use. Do not mount under any live electrical
wires, utilities or drains.
Do not use this produet for anything other than its intended purpose. Misuse
con result in serious injury or property damage.
Two people are needed for assembly. Failure to follow this warning could lead
to serious injury or damage to property.
Components
Step 1
To build the first part of this assembly you will need;
The bottom pole (3)
Wheels (6)
Base (9)
Axle (10)
Align one of the wheels (6) into the slots on the base (2), using the help of
another person take the bottom pole (3) and place into the front of the base.
Thread the axle (10) trough the holes; to the wheel and through the bottom
pole and through to the second wheel. 
Step 2
Take both supports (4) and align the holes up with those on the base, secure
the four holes on the base using (D) bolts.
Then secure to the bottom pole (3) using (B) BOLTS tightening to secure.
Step 3
With a person holding the structure fill the base with either water or sand,
to give the structure stability. 
Step 4
Take the centre pole (2) and slot over the bottom pole (3), ensuring the screw
holes are aligned.
Secure into place using the 2 (A) bolts, tighten to secure. 
Step 5
To assemble the backboard and hoop.
Place the plate of the top pole (1) on the back of the backboard (5) and then
place the plate of the hoop (7) into the front slot on the backboard.
Secure all three into place using the 4 small hex bolts (C), tighten to
secure.
NOTE: Ensure the backboard is between the two metal parts to help with
stability.
Step 6
Take the net (8) and hook over the loops.
Now take the top pole assembly and slot onto the centre pole, align the holes
on the top pole with those on the centre pole and insert the 2 tension knobs,
tighten to secure into place.
The height can be adjusted using the tension knobs (E) by loosening and
adjusting the height of the top Pole, re-tighten when sufficient height is
achieved.
CAUTION: Only an adult should adjust the height.
Min Height – 1.72 m
Max Height – 2.15 m
Art. no. 809-002
Art. no. 805-525
Imported by NSH NORDIC A/S
Virkefeltet 4 8740 Braedstrup
Denmark EAN 5705858708331
Virkefeltet 4 8740 Braedstrup
Denmark Manufactured by Zhejiang Kanglaibao Sporting Goods INC.
Factory address: No.1, Industrial 6th-Road, Industrial area, Lian Cheng
County ,Longyan city, Fujian
Province,China EAN 5705858708331
Documents / Resources
|
NORDIC Games 7402157A Basketball Basic
Stand
[pdf] Owner's Manual
5705858717746, 809-002, 7402157A Basketball Basic Stand, 7402157A, Basketball
Basic Stand, Basketball Stand, Basketball Basic Stand, Basic Stand, Stand
---|---