Godox RGB Tube Light TL30

Godox RGB Tube Light TL30

Foreword

Thank you for purchasing this Godox Product! This RGB Tube Light TL30 is a multifunctional RGB light with dual color temperature, high light brightness and wireless adjustment. Suitable for almost all shooting occasions e.g. live, camping, make up, portrait shooting, make up, video, wedding, children photography, etc. It’s portable and easy to be operated.

Feature

• Freely switch LED CCT mode,RGB mode and 37 special effects modes.
• Easy to adjust color temperature, light brightness, hue and color saturation.
• Remote control by smartphone APP.
• Use in combination to make more creative light groups.
• Both ends have magnetic absorption function, can be attached to the plane of iron products.
• Lightweight and portable, it can be held by hand, and the angle can be flexibly changed.

Warning

• Always keep this product dry. Do not use in rain or in damp conditions.
• Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
• Keep out of reach of children.
• As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment.
• Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result.
• As this product has built-in lithium battery, do not disassemble, impact, squeeze or put it into fire. If serious bulge occurs, please do not use.
• Do not use or store the product if the ambient temperature reads over 40°C.

Names of Parts

1. Main Body
2. Power Switch
3. MOD Button
4. DIM Button
5. Select Dial
6. Display
7. Type-C USB Port
8. Screw Hole
9. Magnetic Absorption

What’s in the Box

Battery Management

1. Power Supply
   With built-in lithium battery which can offer about 1 hour’s lighting in 100% brightness once got fully charged. The light can also be charged through USB cable.

2. Charge
   The whole charging takes about 1 hour and 30 minutes when using 5V/2A charger (optional). The charge grids indicator will be blinking in charging while displaying full grids once got fully charged.

Operation

Power Switch
Long press the switch power button for 1.5s to turn on or off. Then, the current information will be displayed on the OLED panel.

Mode Selection: CCT Mode/RGB Mode/ Special Effects Mode
Press MOD button to switch different modes:

• CCT displayed on the screen means CCT mode
• HSI displayed on the screen means RGB mode
• FX means special effects mode

Bicolor Mode
Color temperature adjustment: turn the select dial to adjust the color temperature from 2700K to 6500K.
Adjustment in 500 values quickly or 100 value normally by turning the select dial. Press DIM button again to confirm, and the parameter stops flashing.

Press the DIM button, then, press DIM button and the brightness value will be blinking. Turn the select dial to adjust the value. Adjustment in 10 values quickly or 1 value normally by turning the select dial.

Hue adjustment: press the MOD button to switch to CCT interface. Press down the select dial to choose G/M and turn the select dial to adjust hue from -50 to 0 and 0 to +50. Adjustment in 5 values quickly or 1 value normally by turning the select dial.

Colorful Mode
Adjust hue H: press the MOD button to switch to HSI interface. Press down the select dial to choose H and turn the select dial to adjust hue. Adjustment in 10 values quickly or 1 value normally by turning the select dial.

Adjust saturation S: in HSI interface, press down the select dial to choose S and turn the select dial to adjust saturation. Adjustment in 10 values quickly or 1 value normally by turning the select dial.

Special Effects Modes (13 categories divided into 37 kinds)
Press the MOD button to switch to FX interface. Turn the select dial to choose light effects categories from 1 to 13.

After choosing the current mode, press down the FN multifunctional select dial from I, II and III.

There’re 37 kinds of situational special effects mode which are divided into 13 categories for your choice.

Bluetooth Control

Bluetooth ON/OFF : long press the MOD button to enter Bluetooth interface.
Turn the select dial to choose the Bluetooth and press down to set it to ON or OFF.

Scan the QR code to download the “Godox Light” smartphone APP(can be used by Android and Apple
system). For more smartphone APP operations, please open the “help” in APP to gain detailed guidance.

Bluetooth reset function: in Bluetooth interface, turn the select dial to choose RESET. Then, press down the select dial until the RESET is displayed. The screen will auto back to Bluetooth interface after being successfully reset.

Note: the APP can be used directly o the firstly installed device (smartphone or iPad). When changing to other mobile device, the light shall be reset before the normal usage of APP.

Technical Data

Duration(continuous output in 100%

full power in 2700K or 6500K)

| Approx. 60 minutes
Control Method| Smartphone APP
Bluetooth Wireless Control Distance| ≈30m
Operation Temperature| -10~40 °C

$

Dimension| 42*300MM
Net Weight| 0.3Kg
BT Frequency Range| 2402.0-2480.0MHz
Max. Transmitting Power| 5dbm

Product design and specifications are subject to change without notice.

Maintenance

This product, except consumables e.g. adapter and adapter cable, is supported with a one-year warranty.
Avoid sudden impacts and the product should be dedusted regularly. Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories. Unauthorized service will void the warranty.
If the product had failures or was wetted, do not use it until it is repaired by professionals. Changes made to the specifications or designs may not be reflected in this manual.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>