CELESTRON 81038 NexGo DX 2-Axis Smartphone Digiscoping Kit Instruction Manual
- June 6, 2024
- Celestron
Table of Contents
CELESTRON 81038 NexGo DX 2-Axis Smartphone Digiscoping Kit
#81038 Installation
Visit celestron.com for the full instruction manual and more information
Jeck Setup
UNIVERSAL SMARTPHONE ADAPTER AND BLUETOOTH REMOTE
USING THE BLUETOOTH REMOTE
- To insert or replace the battery, place your thumb in the center of the back cover, pressing inward and sliding downward remove the battery door. The CR2032 battery should be inserted with the positive (+) side facing upward. Replace the cover.
- Press and hold the button on the remote for 5 seconds. A blue light will turn on and, after a few seconds, start to blink. The remote is now in pairing mode.
- Using the Bluetooth settings on your phone, pair the device called “GBshutter”.
- Open your camera app. Press the button on the remote to trigger the shutter on your phone.
- If your camera is in video mode, you can press the button once to start recording and again to stop the recording.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>