MEGACOM Catchmon Go Plus Auto Catcher User Manual
- June 6, 2024
- MEGACOM
Table of Contents
MEGACOM Catchmon Go Plus Auto Catcher User
User Manual
Enhanced bluetooth design
Automatically collect and capture, earn stardust, candy, and experience.
Always on 600 hours on standby
With up to 600 hours of standby power, no need to recharge
One-touch stable reconnection
Only need to touch your phone to reconnect CATCHMON GO
How to connect Catchmon GO with phone for first time
Insert two AAA batteries and turn on Catchmon GO. The LED will flash green several times
Turn on Bluetooth in phone
Go to Pokemon Go and click “Main Menu”
Click “Settings” in upper right corner
Go to bottom and click “Pokemon Go Plus”. Available devices are shown below.
Click on pokemon go plus in phone to start connecting with Catchmon GO
After successful connection, available devices on the app will light up like
the graph.
LED will be purple and flashing when Catchmon GO is connected.
If catchmon GO had successfully connected with phone before but signal is
lost, LED will be blue and flashing.
To reconnect, simply click Go Plus icon at top right in phone app map.
(Purple light flashing if connection successful)
**To connect with new phones, first unpair previous Catchmon GO connection.
Methods are indicated as follows.
**
Function and light description
Press Catchmon GO button to switch between the different light functions.
Press once and go from blue light > green light > purple light In order.
Switch to the desired light option, then set up based on the Instructions
below.
Blue light: to unpa1r Catchmon GO Bluetooth catchmon GO with a new phone,
first unpair previous connection: Pressing LED to blue light, long press again
for 3 sec to unpair.
When unpairing, LED will be blue and yellow flashing for 30 sec.
Unpairing successful : green light flashes
Unpairing unsucessful : red light flashes
Green light: notification sound switch
Green light: sound on
Green breathing light: sound off
In green light display, press for 3s to switch on/off notification sound
setting.
Purple light: vibration switch
Purple light: vibration on
Purple breathing light: vibration off
In purple light display, press for 3s again to switch on/off vibration
setting.
Turned on successful : purple light flashes
Turned off successful : red light flashes
When you turn on Catchmon GO, press the button first and turn on the power switch together, both sound and vibration functions will be turned off.
Catchrnon tips
- If bag is full and cannot collect Items from Pokestop, first deactivate “Nearby Pokestop” notification In Go Plus setting menu.
- If out of red Pokeballs and temporarily cannot capture, first deactivate “Nearby Pokemon” notification in Go Plus setting menu.
Light, sound and vibration description
connection status display
Light
| Status| Sound| Vibration
---|---|---|---
● Red flashes| Low battery| NA|
NA
● Green
| Awaiting Bluetooth connection| beep∼ twice| single vibration twice
● Blue| Bluetooth connected / Signal disconnected| beep∼ twice|
single vibration twice
● Purple
| Signal connection successful| NA| NA
● Red| Phone unable to connect to Internet| beep∼ triple|
single vibration triple
Within 3min, connection status (sound & vibration) is prompted every 10s; between 3-10 min, every 30s; longer than 10min, no prompted.
Game status display
Light
| Status| Sound|
Vibration
---|---|---|---
● Blue
| Within range of a PokeStop| NA| NA
● Green| A Pokemon is nearby| NA|
NA
● Yellow
| A Pokemon Is nearby (haven’t caught)| NA| NA
White| Catching Pokemon| NA|
NA
● Red
| Pokemon runs away.| NA| NA
Multicolor
|
Successfully catching a Pokemon or visiting a PokeStop
|
NA
|
NA
White| Item storage is full| Beep∼ tripie|
Singal vibration triple
● Red
| Out of Pokeball| Beep beep beep∼ triple| Tri∼vibration triple
● Red| Out of range of the PokeStop| Beep beep,., triple|
Dual vibrataion triple
Additional Instructions
Catchmon Go consumes very little power and has power-saving and sleep mode features.
Pokemon app will automatically disconnect from Catchmon every hour. If not
reconnected after lOmln, Catchmon Go will go Into sleep mode.
Player can press Go Plus connection Icon In app anytime and automatically call
up Catchmon Go to reconnect.When changing batteries, Catchmon Go will retain
all settings in memory so reset is not necessary.
If unable to connect with Catchmon Go, please try the following:
- Delete Pokemon Go Plus Bluetooth setting in phone.
- Go to game settings and disconnect Pokemon Go Plus.
- Unpair Bluetooth setting in catchmon (Press blue LED 3 sec)
- Turn off game and restart it.
- Connect catchmon GO and Pokemon Go App as per the first time.
P.S: Pokemon Go App, Android and iOS system upgrades may cause Catchmon Go to not connect. Multiple Catchmons in one place will also cause Bluetooth interference in phone and cause disconnection.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any Interference received, Including Interference that may cause
undesired operation. Non-modifieation Statement :
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement :
The device has been evaluated to meet general RF exposure requirement,
The device can be used in portable exposure condition without restriction.
Compatible with lphone 66 or higher devices with IOS Ve, 11 or higher
Installed. Compatible with Android devices with 2 GB RAM or more.
Bluetooth Smart (Bluetooth Ve, 4.0 or higher) capability and Android Ve,. 7.0
or higher Installed.
Copyright ©Sperry Cot poeation All Rights Reserved
catchmon Go is the trademark of Sperry Corporation. Pokemon / PokemonGo /
Pokemon Go Plus are the trademarks of Nintendo. The other trademark names are
the used marks, trademarks or regstered trademarks of the corresponding
oompanies. This Product is not sponsored, endorsed, or approved by Nintendo,
ThePok6non Company Or Niantic.
Made In Taiwan
SPERRY CORPORATION
369 , Fu-Shin North Road , Taipei Taiwan
www.dualcatchmon.com
Brand: MEGACOM
Model No: CG-1688
Power Rating: DC 3V, AAA batteries*2 (not lnducled)
Operation Frequency: 2402MHz ∼ 2480MHz
Output Power: 0dBm
Hereby, Speny Corporation declares that the radio equipment type catchmon Go
is in c:ampliance with Directive 2014/53/EU.
The full text of the EU declaration of oonformity is available at the follwing
internet address: www.dualcatchmon.com
Copyright 2020 Sperry Corporation All rights Reserved
Documents / Resources
|
MEGACOM Catchmon Go Plus Auto
Catcher
[pdf] User Manual
Catchmon Go, Plus Auto Catcher
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>