GATS TY-16J-XSJ02A Bluetooth Remote Control Instruction Manual
- June 6, 2024
- GATS
Table of Contents
GT Technology Chongqing limited
Bluetooth Remote Control Manual
The description of the remote control in this manual corresponds to the actual
keys. Please read the instructions carefully and use the instructions
correctly. Open the battery cover on the back of the remote control, insert
the batteries in the correct polarity direction (+ to +,-to -), insert two
batteries (1.5V M), and then dose the back cover. 
The product sends out a Bluetooth remote control pairing request. Press the
menu and return button for more than 3 seconds to complete the remote control
pairing, and then the Bluetooth remote control can be used normally.
Key Description:
Power: Turn on/off the product
Mute: turn on/off the sound function
Vol +/-: adjust the volume of the sound
Set up : Quickly call up the settings menu
Voice: input voice function (function requires product adaptation to use)
CH +/-: adjust analog/digital TV channels (functions need product
adaptation to use)
Navigation keys (up/down/left/right) : move through options and menus
OK key: confirm the selection
Menu: Enter the main menu or enter the menu on the playback interface
Homepage : Enter the main page
Back : Back to the previous level
Specifications:
Working voltage : 3V Bluetooth
RF: 2402-2480MHz
Distance : 10m
Transmitting power: -4dBm
Environmental characteristics: -10°C-50°C
Size: 160mm42mm19.42mm
Model : TV-161-XS.102A
Brand : GATS
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may muse harmful interference to at communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to rat: floor
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter. The device
can be used in portable exposure conditions without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.