JOWUA FG001330000 Multi-Device Wireless Controller User Manual

Joshua Multi-Device Wireless Controller
Joshua Multi-device Wireless Controller
User Manual

KEY LAYOUT

MULTI-CONNECTION MODE SETTING

Joshua controller supports many game platforms. Please move the multi-device switch to select the corresponding connection mode.

X: Bluetooth
S: Switch
: Power off / Wired Connection

Step 1:
Move the [Multi-device switch] to select the connection mode.
Step 2:
Press the [Home] button to activate the controller.
Step 3:
Press and hold the [Sync] button for 3 seconds until you see the LED light flashes quickly to start pairing.
＊ Please see “How to Pair” for more first time connection setting details.
Step 4:
The LED light will stop flashing and remain lit once the connection is successful.
＊ Note: Controller will be in auto sleep mode after unsuccessful connection for 10 seconds. Please press the [Home] button to wake up the controller.

**HOW TO PAIR

**

X: Bluetooth

1. Switch the [Multi-device switch] to X mode.
2. Press and hold the [Sync] button for 3 seconds until you see the 2nd LED light flashes quickly to start pairing.
3. Go to the Bluetooth setting on your device and search for a new device, choose “Xbox Wireless Controller” and connect.
4. LED light will stop flashing and remain lit once the connection is successful.

S: Switch

1. From the HOME Menu, select Controllers, then Change Grip and Order.
2. Go to controller setting on Switch (as photo), switch the [Multi-device switch] to S mode.
3. Press and hold the [Sync] button 3 seconds until you see the 3rd LED light flashes quickly.
4. Pairing is completed once Switch shows a successful connection to the new controller. The LED light will also stop flashing and remain lit.

＊Note: Under any wireless pairing mode, the controller will be in auto sleep after unsuccessful pairing for 2 minutes. Please press the [Home] button to wake up the controller.

: USB Wired Connection

1. Connect the controller and host device with the USB cable as a wired controller while charging the battery.
2. When the USB cable is plugged-in, the controller will automatically disconnect the wireless (Bluetooth) connection and set a wired connection as default.
   POWER OFF
   Switch the “Multi-device switch” to power off mode. Ensures the controller is shut down, and will not awake or power on by pressing any button.
   ＊Note: When the USB cable is plugged-in, the controller still can be connected and charged even on the power-off mode.

AUTO SLEEP MODE

The controller will go into sleep mode automatically under this situation for energy-saving purposes;

• When the host is powered off.
• Without pressing any button in 5 minutes.
• After unsuccessful connection (LED flashes slowly) for 10 seconds.
• After unsuccessful pairing (LED flashes quickly) for 2 minutes.

POWER AND BATTERY

Battery level indicator:
Press [Turbo] and [Directional pad Left / Right] to check current battery level. The LED will flash for 3 seconds and switch back to the connection mode indicator.
Low power alert: when all four LED flash means the controller battery is under 10%. Please plug in the USB-C port to start charging.
Battery charging status:

• 0 – 25% : LED 1 flashes
• 25 – 50% : LED 1 remain lit, LED 2 flashes
• 50 – 75% : LED 1,2 remain lit, LED 3 flashes
• 75 – 100% : LED 1,2,3 remain lit, LED 4 flashes
• Fully Charged: 4 LED always on

Working time: Up to 6 hours
Standby time: Up to 25 days
Charging time: Up to 2 hours to fully charged
＊Please do not leave the battery on a low percentage or unused for extended periods of time. There is a chance that the battery cannot be charged after long periods of time.  Check the charge status and charge the battery as appropriate.

AUTO BURST & TURBO

Burst mode setting:

• Manual Burst
  Press [Turbo] (1st time) + [A / B / X / Y / L / ZL / R / ZR] to activate.

• AUTO Burst
  Press [Turbo] (2nd time) + [A / B / X / Y / L / ZL / R / ZR] to activate.

• Cancel Burst
  Press [Turbo] (3rd time) + [A / B / X / Y / L / ZL / R / ZR] to cancel burst.

• Clear & Reset Burst
  Press and hold [Turbo] for 5seconds to clear and reset all turbo settings.
  Three-gear adjustable shooting speed:
  Burst speed adjustment: [Turbo] + [Increase/Decrease] / During the burst, the mode light flashes at the corresponding speed. The speeds as follow;

• Slow: continuous burst 5 times per second (1st gear)

• Medium: continuous burst 12 times per second (2nd gear)

• Fast: continuous burst 20 times per second (3rd gear)

VIBRATION LEVEL ADJUSTMENT

The controller supports 5 levels of vibration strength; 100%, 75%, 50%, 30% and Off. Five-gear vibration adjustment as below;

• Increase motor: [Turbo] + [Directional pad Up Arrow]
• Decrease motor: [Turbo] + [Directional pad Down Arrow]

RESET

When there are unsolvable faults, you can try to press and hold the [Home] button for more than 10 seconds. The controller will reset and you need to reconnect the controller the first time.

Product Specification

• Size: 15411159mm
• Weight: 185g±10g
• Material: New type eco-friendly ABS
• Connection: Bluetooth
• Power:
  o Battery: Built-in 600mAh Lithium-ion battery
  o Working voltage: DC 3.7-4.2V
  o Input voltage: DC 5V / 600mA
  o Working time: 6 hrs
  o Charging time: 2 hrs fully charged
  o Standby time: About 25 days

Product Specification

• Support Multi-Device & Mode
  o Tesla, PC, Apple Arcade, Android, Xbox, Switch

• Vibration: Dual motor, powerful vibration mode

• Built-in six-axis gyroscope and acceleration function for better game experience

• Support manual burst, auto burst, and burst clearance function

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>