HORWIN EK3 Electric Vehicle Anti-theft Device User Manual
- June 6, 2024
- HORWIN
Table of Contents
HORWIN EK3 Electric Vehicle Anti-theft Device
Function Keys
Anti-theft button
Press the button gently, then the vehicle will enter the anti-theft alarm
state. When the electronic key is more than 1.2 meters away from the
motorcycle, the motorcycle will automatically enter the anti-theft state.
Defense cancel button
slightly press to release the vehicle from anti-theft alarm state. the horn
will sound twice, and the alarm guard will be lifted (stop the alarm on the
way)
Startup button
Once click; the whole vehicle is electrified and can drive without keys double
click; the vehicle can turn on the whole-vehicle power supply without key.
IC Caution.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Announcements
This product before leaving the factory, after strict quality inspection
management. Under normal use, will be able to play its superior performance,
but in order to ensure the interests of the majority of consumers and maintain
the company and brand awareness, special guarantee from the date of purchase
within a year, if due to manufacturing process or the fault caused by the
components shall be repaired free of charge with this warranty card.
The remote control is precision manufactured, please do not drop it heavily
Replace the battery when the remote control distance bending moment or the
lamp becomes dark.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>