XPLORER RSW Remote Control for Portable Metal Detector User Guide

User Guide
After charging your device!

QUICK START

Switch ON

1. Switch on the remote, press 1 second the button
2. Choose the audio output
3. Switch on the headphone press 2 seconds -(WS6 / WSA II / WSA II XL)

NOTE: a headset paired with the remote control will turn on and off automatically.

The flash of the led indicates the awakening of the coil then flashes every second. By default, the DEUS II starts on the factory program N ° 1 GENERAL.
Use – + to test another of the 12 factory programs.

Switch OFF

Press 2 seconds the button on the top left to switch off the remote control.
The wireless XP headphones switch off automatically (otherwise force it off by pressing and ).
If you wish to change the main detection settings:
Press MENU, scroll through the functions, set with -+, and press to return to the main menu.
www.xpmetaldetectors.com

FMF Coil

1. Insert the rubber washer inside the lower stem.
2. Position the lower stem on the coil.
3. Position the screw.
4. Add space and screw in.

Remote assembly

Adjust armrest

1. Remove the screw
2. Adjust the armrest on of the three positions and screw

POWER SUPPLY-BATTERIES

Battery life

WS6 Headphone
Battery life| 15 h
WSLA II/WSAII XL
Battery life| 18H
Coil in Multi-frequency| Prg. 1,2,3,4,5,7,8,9,11,12| Prg. 6 DEEP HC/Prg. 10 DIVING
Battery life| 12h| 8h
The coil in mono-frequency (P7)| 4 kHz| 7 to 18 kHz| 25 kHz| 32 kHz| 45 kHz
Battery life| 8h| 13h| 15h| 18h| 20h

The remote control battery life is 30h on the wireless headphone output, drops to  15 with 15h with the loudspeaker or active BH-01 headphones, even with a volume level at 1. Deactivate the unused outputs by moving them to 0 to increase battery life.
‘Deus II is regulated to prevent any drop in performance, even when the battery level is low

Charging time: -3 Hours

The LiPo (lithium polymer) batteries have no memory effect, meaning that you can charge them at any time without waiting for them to go flat.

Coil LED flashing and meanings

• Coil on charge: Constant LEO
• Switching on: Rapid flashes followed by three to 1 long flash depending on battery level*.
• In operation: One flash per second
• On standby: one flash every four seconds
• On deep stand-by seriously discharged: one flash every thirty seconds
• Switching off: three to one long flash depending on battery level*
• When switching on the MI-6 pinpointer: the coil LEO flashes rapidly.

To switch off the coil LEO and wireless headphones during use: In OPTION > COIL pairing, select your coil of choice as opposite and press the key for four seconds. When switched off, this mode becomes deactivated and the LEO re- turn to normal operation.

Charge

The coil, remote control, and headphone are powered by a Lithium battery (LiPo). Please use the mains unit supplied that can charge the three components simultaneously using the three-output cable.
****The three components (coil/remote control/headphone) can be charged by any USB mains unit 5 V/1 A minimum. Watch out for the quality of the charger and counterfeits, use a certified model from a reputable brand carrying the following certification symbols:

Under no circumstances can XPLOREIR (XP METAL DETECTORS) be held liable for damage or loss generated by using a defective charger or failing to comply with the certification standards in force.

• Connect the USB plug to the power supply.
• Plug the round connector into the remote control and the two USB min. B to the headphone and charging clamp.

The coil is charged using the clamp supplied. Connect it along the ribs of the coil guard to respect the correct connecting sense and avoid an inversion. The clamped output must be facing towards the center of the coil as indicated below.

Lithium Polymer (LiPo) battery lifetime

A well-maintained LiPo battery can last ten years in your XP detector!
The Lithium Polymer batteries (LiPo) are designed to withstand hundreds of charges, thereby generating significant battery savings. As a guide, a ten- year lifetime can be envisaged when they are used correctly on a weekly basis.
Battery lifetime is in your hands!
To extend the life of your batteries well beyond five years, do not store them either flat or fully charged for a long time. Keep them half charged between 40% and 80%. If you do not use your detector for several months, check them every two months by letting them go flat and then charging them to 40-80%.

Replacing batteries

The batteries for the wireless headphones (ref battery: GMB4S2230 – ref XP: 0OBBWS-WTUBE) and the remote control (ref battery: GMB721S4S – ref XP: 00E113M-WTUBE) are easy to replace. Unscrew the rear/lower cap of the headphones or remote control / Remove the speaker of the Remote / Unclip the battery and change it. Then screw the cap (taking care of the 0-rings and speaker).

replace any of the detector’s batteries. breakages or defects (sealing, …)
caused by changing a battery or opening any part of the detector will void the
XP warranty.  
BATTERY REPLACEMENT (ref battery: GMB721S4S – ref XP: DOBBM-WTUBE): The search
coil battery is sealed for obvious reasons – safety and impermeability. It
must be returned to our service department or an XP distributor for
replacement.

  * Remove the coil guard. Using a cutter, cut the battery cover along the inside groove, the battery cover is the one with the battery logo &In.
  * Disconnect the out-of-service battery and remove it. Lithium batteries must be recycled appropriately or returned to your retailer.
  * Connect the new battery and inject silicon from the syringe onto the battery’s white connector.
  * Spread the adhesive from the kit on the compartment surround, insert the battery/cover assembly and stick it down. Keep the cover in place with the clamp.
  * Turn the coil over and make sure it is horizontal so that the liquid silicon can complete the seal. Leave to dry for 24 hours.
  * Lastly, deburr the surplus glue and reposition the coil guard.

A video explaining how to replace the battery can be viewed on the XP Internet
site. The batteries carry two-year parts and a labor warranty.

##### Safety precautions

Acceptable ambient temperature during charging: From 0°C to + 40°C maximum.
Recommended storage temperature: 25°C. Batteries:

  * The batteries are fitted with internal protection systems that shield them from extreme overloads and discharges. They must not be dismantled or short-circuited, which is dangerous and could destroy the protection systems, explode or cause the batteries to ignite.
  * Do not leave batteries on charge unnecessarily and disconnect the power adaptor when the charge cycle is complete or after 3 hrs.
  * If you notice any perforation, odor or another anomaly, please return the battery to the retailer in a sealed plastic bag and do not try to charge again (risk of destroying the protection systems, explosion or causing the batteries to ignite).
  * Never dispose of lithium batteries with your household waste: return them to your XP retailer or take them to a designated collection poin.
  * Do not place the batteries near heat sources and never throw them onto a fire.
  * Never perforate the battery cover or try to weld/solder the battery.
  * Risk-off explosion if the battery is incorrectly replaced. Replacing the battery with another of the incorrect type can lead to a risk of explosion. Only use LiPo batteries supplied by XP (ref.: DOBBM-WTUBE).
  * If you notice abnormal overheating of components on a charge, disconnect the mains unit immediately and do not try to charge further.

##### Power adaptor

  * Always connect your power adaptor in an accessible, visible place to ensure that it can be unplugged quickly in the event of overheating or other problems.
  * Do not charge unattended close to inflammable parts.
  * The power adaptor is only designed for indoor use and should not be exposed to water or humidity.
  * Do not charge the devices during a thunderstorm and unplug the power adaptor from the supply.
  * XP only guarantees electrical safety with the original mains unit or a certified USB mains unit :


Xplorer cannot be held liable for any consequences arising from a failure to
comply with the precautions for use.

#### SPECIFICATIONS

##### Radio

Link| XP Link. Digital wireless  
---|---  
Channels| 36 automatic channels  
Radio Frequency specification  
Radio link Detector| FREQUENCY| POWER  
2.40 a 2.4B GHz| <2.11 dBm  
3.9 a 135.7 KHz| <72dBpA/m a 1Cm  

##### Features/Settings

Detection frequencies| Simultaneous frequencies from 4 to 45Khz depending on
programs (40depA a 10m) + 49 mono frequencies that can be selected around 7
main frequencies,  
---|---  
Sensitivity| 99 levels  
Sound type| Different sound options: PWM, SQUARE., etc.  
Audio Volume| 10 levels for each audio output  
Reactivity| 10 levels (-1/0/06/1/16/2/29/3/4/S)  
Audio Response| B levels  
Iron Volume| 6 levels  
Multi Tones| 1, 2. 3, 4, S. Pitch and Full Tones 1 and 2 + EXPERT modes  
Ground balance| Tracking, Grab, Manual  
Multi-Notch| Yes, with adjustable window width  
Non-motion mode – Pinpoint| Yes, with and without Autotune – Audio and visual  
Discrimination| Audio and visual/ferrous bottle cap rejection on S
levels/Silencer  
Threshold| Threshold and Audio frequency adjustable  
Equalizer| 4 Bands configurable on each audio output  
Programs| 12 factory programs + 12 users  
Backlight| 11 levels adjustable. very low power consumption  

##### General Features

Display screen| 8192 pixels  
---|---  
Software updates| Yes, by USB/Internet connection  
Wireless Headphones optional| WS6 (rainproof) – WSAII (rainproof) – WSAII XL
(IP 68-1m)  
Wireless coil optional| DD 22.Scm-9’72B cm-11734x2Bcm-13″x11″ (fully
waterproof 20m – 66 ft)  
Coil cover| Yes  
Hip mount remote control case| Yes  
Headphones storage case| Yes  
Stem| Fully telescopic. S-shaped  
Batteries| Remote/Coil: 700 mAh – Headphones: 320 mAh  
Battery level indicator| Yes: Remote/Headphones/Coll/MI-6  
Wireless Remote Control battery life| -15 to 30H depending on audio output
activated  
Wireless Headphone battery life| -1SH WSAII/W56  
Wireless Coil battery life| BH to 20H depending on programs and frequencies  
Power charger| Depending on version. Input 100-220V 50/60Hz, Output SV-1A max.  
Cigarette lighter charger| Optional  
Bone conduction headphones| Waterproof IP68 – 20m – 66 ft (optional)  
Charging time| -3 h  
Total detector weight with batteries| See the product page for details on each
version  
Stem weight| 370 g (S Telescopic) – 305 g (S Telescopic Ike)  
Remote weight with battery| 150 g  
Headphone weight with battery| WS6: 82 g – WSA 11: 72 g – WSA II XL: 250 g  
Coil weight| 22.Scm- 9″: 345 g – 28 cm-11′: 470 g – 34x28cm-13″x11″: 570 g  
Length of folded stem| 58 cm  
Length of extended stem| 130 cm  
Operating T°| 0 to + 40°C  
Max ambient T° during charging| 0 to + 40°C  
Recommended storage T°| 25°C  
Waterproof coil| IP 68 – 20m – 66 ft, *optional antenna required when the coil
Is submerged  
Guarantee| Five years parts and labor. Batteries, chargers, and connectors
have a two-year warranty.  
Patents| US 7940049 B2 – EP1990658131and patents pending  

#### SPARE PARTS

#### RECOMMENDATIONS/LAW

Detecting Is an activity that, like most leisure activities, requires a few
general guidelines. These recom­mendations will allow everyone to enjoy their
passion to the full while respecting laws, locations. environ­ment and people.  
Respect the law!

– Find out about existing metal detecting legislation in your country.  
Ask permission from the owner or custodian of the premises before prospecting.  
– Respect the natural environment in which you are prospecting and the
locations you will find yourself crossing.  
– Fill your holes systematically so as to leave the locations in the state in
which you found them. – Keep any waste you have been able to extract with you
and dispose of it in a bin.  
– Avoid prospecting in combat zones of recent wars. Be extremely cautious of
any suspicious object that may look like ammunition. grenade, mine. shell or
bomb etc.  
– Report any suspicious object that you have discovered to the competent
authorities.  
Remember that you are a detecting ambassador, it is important that you
represent us In the correct way.

####  **DECLARATION OF** **COMPLIANCE FCC-IC-UKCA**

This declaration is made under the responsibility of the manufacturer.  
XPLORER SARL – 8 rue du Developpement – F-31320 CASTANET-TOLOSAN  
We, XPLORER. hereby certify that this detector complies with the essential
requirements of European Directives RED 2014/S3/EU, SECURITY 2014/35/EU, and
EMC 2014/30/EU which aim to harmonize legislation in the Member States on the
use of the radio spectrum, electromagnetic compatibility, and electri­cal
safety. The device’s compliance was assessed in accordance with the essential
requirements of this Directive and the harmonized standards:

  * EMF: EN 62311:2009
  * DETECTION EU: ETSI EN 303454 V11.1
  * RADIO EU: EN 300440 1.1 ETSI EG 203367 V1.1.1
  * RADIO USA: FCC 47 CFR part 15: 2019
  * RADIO CANADA: RSS-210_Issue 9: 08/2016 (Amended 2017:
  * SAFETY: IEC 60950-1: 12/2005/AC1: 2006/A1: 2009/A2: 2013: IEC 62369-1: 2014
  * EMC: ETSI EN 301499-1:2019 2.3:ETSI EN 301489-9: 2019 V2.1.1: Draft ETSI EN 301489-17: 2019 V3.2.2

 **Compliance Informations access on the Remote control : START > OPTION >
CONFIGURATION > INFO.**  
A copy of the certificate can be supplied upon request from: XPLORER SARL – El
rue du Developpement – F-31320 CASTANET-TOLOSAN  
FCC: This device complies with part is of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.  
NOTE: The grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. Such modifications
could void the user’s authority to operate the equipment  
IC : This device contains license-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science, and Economic Development Canada’s license-
exempt RSS(s). Operation is subject to the following two conditions: (1) This
device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.

#### SAFETY/RECYCLING/PRECAUTIONS

#### Safety relating to electromagnetic radio waves

This product complies with standards for user safety with regard to
electromagnetic waves. The strength of the radio signals used is considerably
weaker and on a much smaller scale than those emitted by mobile telephones
(2,000 to 4.000 times weaker). Moreover, when the complete system is used, the
audio headphones only act as passive radio receivers.  
Warning: The accessories delivered with this detector can vary: similarly, the
menus and certain functionalities described in this manual can differ slightly
from the purchased product.  
This detector is not suitable for searching for hazardous targets such as
ammunition. mines, etc.  
 **Recycling of electrical and electronic waste in the European Union and the
other countries/regions in accordance with selective waste sorting
procedures**  
If this symbol is displayed on the product or Its packaging, it means that the
product must not be disposed of with your household waste. It must be taken to
a designated collection point for recycling electrical and electronic waste.
This selective waste sorting and recycling helps to preserve natural resources
and avoid any potential risks for human health and the environment that could
result from inappropriate scrapping. due to the possible presence of hazardous
substances in the electric and electronic equipment. For more information on
places for disposing of electrical waste, please contact the shop where you
purchased this product. Alternatively, you can return it to your supplier, or
directly to XP. The same is true for lithium batteries which must be recycled
appropriately.  
1 2021 Xplorer sari  
This document contains information that is protected by existing legislation
on copyright, brands, and royalties. Any reproduction, even partial, of this
document, the logos or the XP and Deus brands is prohibited without the
consent of:  
XPLOPEP SAPL -13 rue du Oeveloppement – F-31320 CASTANET-TOLOSAN

##### PRECAUTIONS FOR USE

DEUSII is a sensitive piece of electrical equipment, designed to be as robust
as possible. Despite this. it is important to take care of it and exercise
certain precautions in order to prolong its life :  
– Do not store your device for long periods with flat batteries.  
– Ideally, you should discharge/recharge the batteries at least once a month
and if possible store them at 40% to BO% charged to extend their life beyond
five years.  
– Do not expose your detector to extreme temperatures. particularly inside a
car in full sun.  
– Do not expose your detector to the sun without reason when it is not being
used.  
– Use the storage case that is supplied with the headphones and never carry
them at the bottom of a bag without protection. – Use the case that is
supplied with the remote control to protect it in adverse conditions and when
the detector is stored away. – Depending on how you use your detector, it may
be advisable to clean its elements regularly. A damp cloth can be used to
clean the non-waterproof parts – In a salt environment, rinsing with fresh
water is mandatory for the remote control, coil, and BH-01 head-phone. Do not
use solvent or alcohol. – After use, remove any dirt from the stem’s locking
mechanisms. – The mains power unit is intended for inside use only. Connect it
in a visible and accessible location. Unplug it after use. if overheating or
during another suspicious event. – The equipment must be recharged using a
SELV LPS power supply.

## Read User Manual Online (PDF format)


<div class="pdftoolbar row sep-">
    <div class="col-xs-4 col-md-2 count"></div>
    <div class="col-xs-8 col-md-10 center">
        <button class="btn sep-right05" onclick="javascript:window.pdfViewer.setZoom('in')"><i class="icon icon-zoom-in"></i></button>
        <button class="btn sep-right05" onclick="javascript:window.pdfViewer.setZoom('out')"><i class="icon icon-zoom-out"></i></button>
        <a data-umami-event="pdf-fullscreen-btn" id="fullscreen-btn" href="/pdf/545377-xplorer-rsw-remote-control-for-portable-metal-detector-user-guide-pdf" class="btn"><i class="icon icon-expand-full"></i></a>
        <a id="doc-info-btn" href="/545377-xplorer-rsw-remote-control-for-portable-metal-detector-user-guide" class="btn"><i class="icon icon-chevron-left"></i></a>
    </div>
</div>

<div id="pdf-viewer" class="center pdfjs-viewer" style="min-height:70px;">
    <div id="loading-hint"><i class="icon icon-3x icon-spin icon-spinner-indicator"></i> Loading......</div>
</div>

<script>
window.F.push(function(){
    app.show_pdf('https://manuals.plus/m/7654b6672b9b5a3fb177bcd731bee355e185acae086c6cf26000639d7c925bee_optim.pdf', 'pdf-viewer', 0);
})
</script>


## Download This Manual (PDF format)

[Download this manual&nbsp;&nbsp;&gt;&gt;](https://manuals.plus/m/7654b6672b9b5a3fb177bcd731bee355e185acae086c6cf26000639d7c925bee_optim.pdf)