Smarty Pear 257260 Automatic WiFi Enable Litter Box User Manual
- June 6, 2024
- Smarty Pear
Table of Contents
Smarty Pear 257260 Automatic WiFi Enable Litter Box
Safety Instructions
Thank you for purchasing a Leo s Loo Too by Smarty Pear. Please carefully read the following safety instructions before using the Using your Leo’s Loo is an acknowledgement that you have read and agreed to all the safety instructions written in this user
- Do not use this machine in Automatic Mode for cats weighing 3lbs or less.
- Do not power on while your cat is inside or on top of the machine.
- When first powered on, the machine will complete a rotation to calibrate sensors. Do not allow your cat to enter the machine at this time or the calibration process will be
- Use only small particle clay clumping cat litter that absorbs moisture.
- Place the machine on a dry, solid and level surface. Soft or uneven surfaces will impede
- For indoor use only. Do not place in direct sunlight.
- Do not soak the base of the machine in water.
- Empty the waste drawer frequently; no less than once per week.
- Compatible with 2.4G WiFi networks.
For safety or support related questions please contact Smarty Pear customer support at [email protected]. Our company reserves the right to interpret and amend this document at any time.
Inside the Box
- Power Adapter with 6’ Anti-Chew Cord Drawstring Waste Drawer Liners (x10) Charcoal Air Filter (x2)
- Quick Setup Guide
- Quick Reference Manual
- User Manual
Please note product registration info located at the bottom of device
Components
- Rotating Drum (Removable)
- Sifter
- Silicon Litter Bladder
- Weight Sensors
- Top Cover (Removable)
- Silicone Step (Replaceable)
- POWER Button
- Base
- Top Cover (Removable)
- Waste Litter Drawer
- Power Connector
- Base
Setup
- Place your device on a solid surface (no carpets) to ensure sensors function properly.
- Ensure drum is property seated and cover on.
- Add 1.2 gallons/10 lbs of Clay Clumping Litter.
- Install Waste Drawer Liners and Filters.
- Plug your Loo into a power outlet then press the POWER button for 2 seconds to turn on.
Note: When power is turned on, the inner drum will rotate a
Waste Drawer Setup
- Remove the litter drawer and lift the top cover.
- Spread the waste drawer liner bag evenly inside and smooth out all edges.
- After adjusting the liner, put the drawer cover back on and make sure the edges of the liner are smooth.
- Insert drawer back in.
App Pairing & Functionality
- Scan the QR code to download the app. Create an account and sign in.
- Long press the POWER button for 5 seconds.When you hear 3 beeps, the Loo is in pairing mode.
- In the app, click on “Add Device” or select “+” in the top right corner. The app will display available devices. Select the Loo you’d like to pair with.
POWER Button
Notifications
Information Notifications
LOO USE NOTIFICATION
While in Automatic Mode, you will receive a notification, via the app, each
time your kitty finishes using
UV CYCLE NOTIFICATION
Each time the Loo runs a UV sterilization cycle, you will receive a
notification in the app.
WASTE DRAWER FULL NOTIFICATION
When your Loo detects that the waste drawer is full, it will enter a pause
operation mode and a notification will be sent to your phone through the app
to let you know. To resume operation, empty the waste drawer liner bag and
replace with new one, then click on app “cleaning” button or quick click the
FAILURE TO INITIATE CLEANING
If your kitty is inside the machine and a cleaning cycle is initiated, the
machine will not operate. A warning notification will be sent indicating a cat
is detected in the drum. Normal operation will resume once your kitty is clear
of the Loo.
TOO MANY CLEANING CYCLES RUN
To avoid wasting electricity, it’s recommended that you inspect the Loo and
consider switching to Manual Mode for a short period of time.
MACHINE IS OFF WARNING
Please turn the power back on to continue operation.
RECOMMENDED CLEANING
To avoid unpleasant odors, it’s recommended that you replace all litter and
the carbon air filters every 30 days. To clear this notification, click on
settings, then check “replace litter and carbon filter.”
Error Notifications
WEIGHT SENSOR ERROR: The sensors are reading inaccurate numbers.
How to clear: Inspect if the weight sensors, located inside the four feet on
the bottom of the machine, are on a solid, flat surface (no carpet) and that
no foreign objects are underneath the feet (i.e. cat food or litter
particles). Then restart the machine.
SAFETY MODE WARNING: The anti-pinch sensor detects a foreign object in
the waste chute. This is an uncommon circumstance. When this occurs, the
machine stops, rotates backwards and enters Safety Mode.
How to clear: Inspect the machine and remove foreign objects in the waste
chute. Then short press the POWER button on the front of the machine or click
the clean button in the app to clear warning. Two short presses will resume
operation.
RADAR SENSOR ERROR: Radar system may be faulty.
If this happens multiple times, please contact customer care at
[email protected].
MOTOR ERROR: Motor connection or operation error.
If this happens multiple times, please contact customer care at
[email protected].
Removing Waste
When the waste drawer is full, the POWER button light will turn red and blink slowly. The machine will stop rotating.
- Pull out the drawer.
- Remove and replace the waste drawer liner bag and top off the litter in the drum.
- Reinsert drawer and short press the POWER button twice to reset.
Cleaning Your Loo
- Detach hood and then remove the drum from thebase.
- Vacuum base and wipe with cleaning solution and cloth. Do NOT use water on the base as it will damage electronics.
- Empty old litter from drum and then wash out with soap and water. Let dry thoroughly.
- Return drum to unit, install cover and fill with fresh clay clumping litter.
Acclimating Kitty
Please scan the QR code to see an instructional video or read the tips below on how to acclimate your kitties
How to get your kitty to use your new Leo’s Loo Too.
- Place a small amount of litter from your old box on top of the litter in the Loo to create a familiar scent.
- Run the machine in manual mode while your cat is present to demonstrate that there is no danger.
- Place food or snacks near the entrance of the machine to encourage your cat to enter and explore.
- Place the Loo near the location of your old litter box. Refrain from cleaning the old litter box or remove it. This will encourage your cat to migrate to the clean environment in the Loo.
Product Specifications
Product Name Leo’s Loo Too
Dimensions 22 x 24 x 27.6 in (56 x 61 x 70 cm)
Input Voltage 12 V
Max Weight Capacity 55 lb (25 kg)
Max Litter Capacity 1.5 gal (6 L)
Material PP
Product Weight – Net 27.5 lb (12.5 kg)
Product Weight – Gross 37.4 lb (17 kg)
Power – Operating 53 kWh per year
Power – Standby 9 kWh per year
Scale Accuracy ± 1 lb (0.5 kg)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Model: LLT
The complete LIMITED WARRANTY, warnings and cautions are available at
© PurLife Brands Inc. / Palo Alto, CA, USA
Made in China