LanParte LRC-02 Wireless Remote Control Compatible with Panasonic GH4/GH5 series Cameras Instructions
- June 6, 2024
- LanParte
Table of Contents
Remote Controller for GH4/GH5
General Description:
The LanParte LRC-02 is a wireless remote control compatible with Panasonic GH4
and GH5 series cameras. LRC-02 allows for a control range of up to 30M while
operating on the2.4 GHz spectrum and the “One to Many” feature can allow for
control of multiple devices with additional receivers (sold separately) paired
to the remote – giving you the ultimate flexibility in locations and angles
captured. Also a handy function for VR shooting.
The transmitter (8.552.6 cm)and receiver (4.21.20.9 cm) are paired before
shipping, and repairing or adding receivers is as simple as putting the
transmitter into pairing mode by pressing and holding both the RECORD and
PHOTO buttons on the transmitter until the indicator blinks red, attaching the
receiver to a camera powered “ON” and in a matter of seconds your camera or
device is now wirelessly controllable.
Multi-interface devices can also be controlled wirelessly with the additional
purchase of the Multi-interface receiver. Compatible devices with a powered
lens can benefit from the added ZOOM feature – giving your camera range in
both capturing the shot and where you can take it. Unlike traditional remote
control devices that require you to be in front of the device for control
operations, LanParte’s LRC-02 remote gives you the freedom to take control of
both your shot and the device capturing it – making it a fundamental accessory
on any shoot.
Specification:
| Products model | LRC-02 |
|---|---|
| **Size** | Transmitter |
| Receiver | 751.7 cm |
| Packing size | 1711.23.5 cm |
Weight
| Product with
packing box| G/W: 220g
Transmitter| N/W: 40g
Receiver| N/W:35g
Item list| Transmitter x1
Receiver x1 **Cable x1
Control distance| About 30 meters in the open environment**
FCC ID: 2AX83LRC-01
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>