Seikilife MA-1 Mini Speaker User Guide
- June 6, 2024
- Seikilife
Table of Contents
BLUETOOTH
Water Bottle Speaker
BUTTON FUNCTIONS
— Single Press -Whine Dam Press and Hold-Previous Track
Single Press-Pa use/PlayfAnswer/End Can) Double Press-Red ial the last N
+ Single Press-Volume Up Press and Hold-Ned Track
Ο Press and Hold-Tum ON/OFF the speaker
Single Press-Mange the strobing lights Double Press-Turn ON/OFF the f
scrolling lights
For some deices speaker controls may function differently than advised here. Refer to the functions and controls of your device for use.
BUTTON FUNCTIONS
| Calor changing lights| | Speaker
---|---|---|---
| changing input -port| | Microphone
RECHARGING
Using the provided clwgirg cable. plug the Micro-1_158 end into the speaker
and the U53 end into an AC walL3dapte-, a computer. or another power source.
When the speaker has a low tette”, two beeps will sound and the LED indicator
will flash blue
CLEAN IN Ii
To clean the bottle, twist to separate the speaker lid from the bottle body.
Clean the bottle separately to avoid damage to the speaker.
- Hand wash recommended
- Use a non-abrasive cleaner
- To clean the speaker， wipe with a damp cloth
WHAT’S INSIDE
The Audio Bottle, a Micro-USB to the USB charging cable, and an infection manual
This device complies with part t 5 of the FCC Rules. Operation is subject to
the following two conditions 01 This device may not cause harmful interference
and (2) this device must areal any intuit-roue received inducing interference
that may cause undesired operation.
RF Exposure information
The device has been evaluated to meet general RF exposure requirements The
device can be used in portable closure conditions without restriction
TECH 5PECIFICATIDN5
| Working Volume | 3.4-4.2 V |
|---|---|
| Changing Power | DC5V/500mA |
| Bluetooth Version | 5.0 |
| Recharge Method | Micro-USB |
| Battery Capacity | 700mAh |
| Rated Power | 3W |
| Bluetooth Range | <25feet |
| Bottle Material | PETG (BPA Free |
| Product Size | 3.07 X 3.07 X 11.50” |
| Product Weight | 0.481bs |
| FCCID | will be added by the supplier |
CONNECTING TO BLUETOOTH
- Make sure the Bluetooth is turned on -on your device.
- Press and hold the power button in, when the speaker turns on, the LED indicator will flash blue. The speaker will enter pairing mode immediately.
- Start playing music! Bluetooth-enabled device.
- Select Pap horn the list on your
Made in China
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modi cations to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>