Dastmalchi B07H98CKWK KONVEX Wireless Bluetooth Sound Collar Instructions
- June 6, 2024
- Dastmalchi
Table of Contents
Dastmalchi B07H98CKWK KONVEX Wireless Bluetooth Sound Collar
STEP ONE
POWER ON
Long press “<!)” button 2 seconds, you will hear prompt tone of power on, then
the speaker will enter into Bluetooth pairing mode with the blue indicator
blinking.
STEP TWO
CHOOSE THE DEVICE
Find “KOVE KONVEX” in your bluetooth list and select it.
STEP THREE
PAIRING SUCCESS
The LED indicator keeps blue once pairing is done, then you can access to
music.
STEP FOUR
- POWER BUTTON/
- MUL Tl -FUNCTION BUTTON
- Long press G) 2 S for power on/off.
- Short press G) when playing music for Play /Pause
- When a call is coming, short press G) to answer/ end a call; short press G) twice to reject a call
- Press @ 3 times to previous song, press @ 2 times to next song
- Short press @ to turn on Siri
- Long press @ to disconnect Bluetooth
- VOLUME KNOB
Slide up G) to turn the Volume up, slide down 0 to turn the Volume down.
BLUETOOTH FUNCTION & LED INDICATOR
Power On: The default mode is Bluetooth pairing mode when power on, blue
LED flashes quickly.
Bluetooth : Blue LED will be normally on after connected successfully.
When it beyonds the range of bluetooth, blue LED will flash quickly.
Bluetooth Disconnect or no any operation: It will power off automatically
when more than 10 minutes.
When connected successfully, if cellphone is out of bluetooth range:
Speaker will get disconnected, Blue LED will flash, it will connect
automatically again when cellphone is back to bluetooth range.
Lower Battery: Red LED indicator will flash quickly when battery level is
below 20%.
Low power shut down: When the battery power is less than 10%, speaker
will shut down with prompt tone.
Charging: Red indicator light will on while charging; red indicator light
will off when charging finished.
PRODUCT SPECIFICATION:
- Product Name: KONVEX
- Bluetooth Version: 5.0
- Battery Capacity: 8OOmAh
- Play Time: 5-6 hours (70% Vol)
- Charging Time: 3 hours
- Driver Units: 3W x2
- Charging Current: 5V IO.SA
- Product Size: 245x205x44.5mm
- Product Weight: 290g
FAQ
Q: What kind of charger should we use for the speaker?
A: All common USB chargers can be used, while we suggest 5V /0.5A.
Q: What if there is noise or discontinuous sound when playing?
A: The speaker can be normally used within 10m under no obstruction
environment. If it is over 10m or with obstruction, there might be noise or
discontinuous sound.
Q: Why will the speaker shut down automatically when it is working ?
A: When there is no bluetooth pairing 10 minutes, the speaker will shut
down automatically to reduce power consumption.
Q: The speaker cannot connect the once-paired cellphone.
A: First, remove the speaker’s pairing name from the cellphone’s
Bluetooth list and then short press the power button quickly to restart paring
mode.
Q: The speaker cannot be started up in a normal situation.
A: Please plug in the charger and try in a few minutes.
“‘This speaker supports mobile phones and tablet PCs etc. Here this User
Manual is illustrated based on mobile phones.
Federal Communications Commission (FCC) Statement.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : Changes or modifications made to this device not expressly approved by Dastmalchi LLC may void the FCC authorization to operate this device.
Note : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure statement:
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.