Guangzhou Lightsource Electronics H01A-TYAZ Smart Lock User Manual

June 6, 2024
Guangzhou Lightsource Electronics

Guangzhou Lightsource Electronics H01A-TYAZ Smart Lock User Manual

Special Attention:

  1. Please keep any mechanical keys outdoors. in case of any emergencies requiring their use.
  2. Please promptly replace batteries after receiving low battery notification.
  3. Please carefully read this manual before installation, and keep it for future reference.

Introduction

Lock structure
Packing List

Check the following drawing to check whether the package contains all the parts

NO Name Qty
1 Front Panel 1
2 Back Panel 1
3 Mortise 1
4 Card 3
5 Mechanical Key 2
6 Waterproof Rubber
Plate 2
7 Screw Stubs: MS*35mm 2
8 Strike& Strike Box 1+1
9 Sliding
Screws:M5*10mm 1
10 Mortise Screws: M5*10mm
(For Aluminum Door) 4
--- --- ---
11 Mortise Screws:M4*2Smm
(For Wooden Door) 4
12 60mm                Square shaft 1
13 80mm                Square shaft 1
14 MS*25mm Screw 1
15 MS*40mm Screw 1
16 M5*50mm Screw 1
17 U-Clip 1
18 User Manual 1
Specifications

Suitable for
Models| HO1A-TYAZ| Doors
Applicable| Aluminum door
Wooden door
---|---|---|---
Materials| Aluminum alloy| Working
Voltage| 6V/4x AA Batteries
Lock Weight| 3KG| Door Thickness
to Fit| 35-65mm
Unlocking
Way| Password
Card
Mechanical key| Data Capacity| Password: 10
temporary password: 10
Card: 380
Color| Silver
Black| Working
Temperature| -10°C-55t
Low wattage
Alarm| Less than 4.8V| working Humidity| 0-95%

Networking mode

Networking mode

  1. Touch to wake the screen
  2. Long press the network configuration key for 5 seconds to enter the network configuration mode

Installation

Turn the handle

Notice: Adjust the handle according to the direction you open the door.

For Front Panel

For Back Panel

Turn the handle

Installation Diagram(For 5572)

Step 1 Install Mortise

Install Mortise \

Step 2 Install Sliding Screw Casing

Install Sliding Screw Casing

  1. The screw casing  place is adjustable from 55mm to 100mm far from the square shaft. Depending on the location of the hole-drilling or the old door hole.
  2. The arrow is always pointing down

Step 3 Install Back Panel and link wire

Install Back Panel and link wire

Step 4 Install fixing screws

Step 5 installation complete

Installation complete

Operation

Registration

After entering the APP, click “Register” at the bottom to create an account. After the authentication of the account and the setting of the password, the account is registered, and then you can log in to the system.(You can register with your email or mobile number)

App  interface

Account login

After the account is successfully registered, you can enter your account to log in

Account login

Create sites and zones

After registering an account for the first time, you need to create a site first, and you can also create an area, so that you have a site with many areas, which is convenient for classification and management of devices later.

Create sites and zones

Join the site

In addition to creating your own site, you can also join other people’s sites. After creating the site with other accounts, you can invite site members to join. After the invitation is confirmed, the site and smart devices can be shared

Device

Add Device
Select the corresponding equipment category for distribution network installation, which can be manually selected or automatically scanned. After the device is added, you can access the panel to use the corresponding functions. It can also be displayed and operated in workbench widgets.

Add Gateway

  1. Tap Add Device on the Home page or + in the upper right corner of the page \to go to the Add Device page.
  2. Click the Gateway, Choose add your zigbee gateway type ,Added successfully
    Add Gateway

Add lock

  1. After the gateway is added successfully, enter the gateway page, click on “Add sub device”, then select more device type. find the door lock option
  2. Door Lock: Touch to wake the screen, Long press the network configuration key for 5 seconds, Door lock reminder : “ Under connecting, pls wait” to enter the \network configuration mode
  3. Door lock reminder: “Network join Succeed” Added successfully
    Add lock
Setting

Remote Open

Need to open the remote unlock setting in the settings, You can directly press and hold the unlock button to unlock.
Remote Open

Free Verify

When started, the door lock will be in normally open mode

Unlock Ways

Manage Password
Used for security verification on the door lock device side and cannot be unlocked

Emergency Password
If all other passwords have been forgotten, use this password to unlock the lock in an emergency.

Unlock Ways

Add temporary password

Dashboard

Edit widget

After entering the APP, you directly come to the workbench, where you can add and assemble the small components you need to build a custom application scenario. But before the widgets can play a role, you need to add the corresponding type of equipment. After the widget is successfully added, the specific devices and functions of the widget can be displayed in the workbench.

Edit widget

Access

APP access (passenger)

Add passers to this module, select the corresponding time range and pass equipment, and you can log in to the app to use the pass function

APP access

Password

Add a password, including a one-time password and a periodic password, for the user to use the password space in the corresponding time range

Password

Guarantee

  • Customer Name:
  • Customer Calls :
  • Purchase Date :
  • Product Name :
  • Product Model :

Note

  1. Please keep this card so that you can use it when you need warranty service.
  2. We provide you with a one-year warranty from the date of purchase.
  3. This warranty service is valid for customers in any country in the world.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
FCC ID: 2AY4QH01A-TYAZ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals